Aftermarket Hydmech Band Saw Parts

P HYD 370215

Cable
Sold By The Inch
Quality Aftermarket Bandsaw Part

Quality Aftermarket Hydmech Part

Cable
P HYD 370215
Sold by the Inch

Product Details
photo below
Blade Width	2.625" Blade
Coolant	none
System	Electrical

^$0.^{25 **}

Q Fluids C5300-5 HYD

C-5300 Full Synthetic Coolant, 5 Gallon
Metal Cutting fluid
5 Gallon Container

Applications

Specially formulated flood sawing fluid for moderate - heavy duty applications on ferrous metals and alloys when you need to paint or weld over the surfaces
A translucent blue, water soluable, full synthetic sawing fluid designed when long life of the coolant is desired.
Metals: Carbon steels, Alloy steels, Cast iron, High alloys steels, Stainless steels and exotic alloys

Features

Enviromentally Friendly: Is easy to maintain and control.
Low Foaming: Even under high agitation conditions
Excellent Corrosion Control: Organic and inorganic corrosion inhibitiors protect machinery and parts from rust.
Rancidity Control: Very resistant to attack by mold and bacteria
Exceptionally Mild: A great choice for individual saw applications
Operator and Machine Friendly: Pleasant to use. Does not smoke or leave a slippery, oily film on parts or machinery. Stable and transparent.
Formulated Specifically for Sawing and Grinding
Lubricates and cools extending tool life
Surfaces can be welded and painted over
Improves life and maintenance of machine wear parts
Does not contain chlorine, sulfur, silicon, petroleum oils or sulfonates
Long sump life-Biodegradable
Surfaces can be welded and painted over

Dilution

1:7 for sawing applications
1:10 for grinding uses

Product Details
photo below
Container Volume	5 Gallon
Fluid Type	Synthetic
Blade Width	All Blade Widths
System	Coolant System
Reference

^$195.^{14 **}

Q Fluids C5200-5 HYD

C-5200 Semi-Synthetic Coolant, 5 Gallon
Metal Cutting Fluid for All Hydmech Saws
5 Gallon Container

Applications

General purpose flood sawing coolant designed for moderate-duty - heavy duty sawing applications involving both ferrous and non-ferrous metals
A translucent blue, water soluable, synthetic sawing fluid designed when long life of the coolant is desired.
Metals: Carbon steels, Alloy steels, Cast iron, High alloys steels, Stainless steels and exotic alloys

Features

Enviromentally Friendly: Is easy to maintain and control.
Low Foaming: Even under high agitation conditions
Excellent Corrosion Control: Organic and inorganic corrosion inhibitiors protect machinery and parts from rust.
Rancidity Control: Very resistant to attack by mold and bacteria
Exceptionally Mild: A great choice for individual saw applications
Operator and Machine Friendly: Pleasant to use. Does not smoke or leave a slippery, oily film on parts or machinery. Stable and transparent.
Formulated Specifically for Sawing and Grinding
Lubricates and cools extending tool life
Enhanced lubrication for improved tool penetration
Improves life and maintenance of machine wear parts
Does not contain chlorine, sulfur, silicon, petroleum oils or sulfonates
Long sump life-Biodegradable

Dilution

1:7 for sawing applications
1:10 for grinding uses

Product Details
photo below
Container Volume	5 Gallon
Fluid Type	Semi-Synthetic
Blade Width	All Blade Widths
System	Coolant System
Reference

^$232.^{11 **}

P HYD 342340

2 Pack Chip brush for Hydmech saws
OD: 4", Arbor ID: 1/2",
OD: 102mm, Arbor ID: 13MM

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Brushes, 2 Pack

OD: 4", Arbor ID: 1/2", Thickness: 5/8"

OD: 102mm, Arbor ID: 13MM, Thickness: 16mm

Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

Chip Brush Troubleshooting

A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

Chip stays in tooth gullet

Teeth breaking off

Teeth cracking

Blade cracking from teeth up

Loss of tooth set

Product Details
photo below
Blade Width	All Blade Widths
System	Chip Brushes
ID	½"
OD	4"
Thickness	⅝"

^$37.²⁰

P HYD 340790

Carbide Back Insert, Top
Older part number TL-770
Aftermarket Hydmech Part

Quality Aftermarket Replacement Part for Hydmech Band Saw

Top Guide (Non Servo Side)
2ea per machine
Carbide Back-Up Blade Guide, Fits Hydmech Band Saws using side guides:
- P Hyd CRB-100-22-00
- P Hyd CRB-125-22-00
- P Hyd CRB-150-22-00
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
All Parts are backed by the sawblade.com 100% satisfaction guarantee
This guide is also the same as the older part number TL-770 back-up guide.

Product Details
photo below
Blade Width	All Blade Widths
System	Blade Guide

^$29.⁷⁶

P HYD CRB-TL-770

Carbide Back Insert, Top
Older part number TL-770
Aftermarket Hydmech Part

Quality Aftermarket Replacement Part for Hydmech Band Saw

Top Guide (Non Servo Side)
2ea per machine
Carbide Back-Up Blade Guide, Fits Hydmech Band Saws using side guides:
- P Hyd CRB-100-22-00
- P Hyd CRB-125-22-00
- P Hyd CRB-150-22-00
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
All Parts are backed by the sawblade.com 100% satisfaction guarantee
This guide is also the same as the older part number TL-770 back-up guide.

Product Details
photo below
Blade Width	All Blade Widths
System	Blade Guide
Blade Width	All Blade Widths
System	Blade Guide

^$29.⁷⁶

P HYD 342315

2 Pack Blade Brush for Hydmech Saws
OD: 3 3/8", Arbor ID: 1/2"
OD: 85mm, Arbor ID: 13MM

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Brushes - 2 Pak

2 Pack, Band Saw Blade Chip Brush

OD: 85mm, Arbor ID: 13MM, Thickness: 16mm

Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

Chip Brush Troubleshooting

A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

Chip stays in tooth gullet

Teeth breaking off

Teeth cracking

Blade cracking from teeth up

Loss of tooth set

Product Details
photo below
Blade Width	All Blade Widths
System	Chip Brushes
ID	½"
OD	3 ⅜"
Thickness	⅝"

^$20.⁴⁶

P HYD 340345

Drive Belt For Hydmech Saws
Vari-Speed Belt
Aftermarket Hydmech Part

Drive Belt for Hydmech Band Saws

Variable Speed Belt used most Hydmech machines This is a Common Wear Item you should have an Extra on hand

P Hyd 340345 - Belt Drive 28 / 800

Product Details
photo below
Blade Width	All Blade Widths
System	Drive Line

^$131.¹³

P HYD 340976

Charcoal Foam Filter
Filter 30 PPI Charcoal Foam
Quality Aftermarket HydMech Bandsaw Part

Quality Aftermarket Replacement Part for HydMech Band Saw

Charcoal Foam Filter
Filter 30 PPI Charcoal Foam
3 7/8 In. X 5 3/4 In. X 1.00
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines.
We only sell direct and pass lower costs to our customers.
All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
Blade Width	All Blade Widths
Coolant	Coolant System
System	Coolant System
Reference

^$10.¹⁸

P HYD 025.0552

Band Brush

Aftermarket Hydmech Parts

Aftermarket Hydmech Parts

P HYD 025.0552

Band Brush

P HYD 025.0552 was also used on S20 series 3 machines, as well as DM8 and DM10 machines.

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Chip Brushes

^$41.³⁶

P Hyd 340045

Bearing
Blade Guide Bearing
Aftermarket Hyd Mech Part

Aftermarket Band Saw Parts

Guide Bearing
Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines
We only sell direct and pass lower costs to our customers
All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Blade Guide

^$6.⁵¹

P HYD 806830

Chip Brush Assembly, Hydmech Saws
Chip Brush Assembly for the S & H Series
Aftermarket Hydmech Part

Quality Aftermarket Replacement Part for Hydmech Band Saws

Chip Brush Assembly for the S & H series of bandsaws.

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Chip Brushes
Blade Width	All Blade Widths
System	Chip Brushes

^$234.³⁶

P HYD 340655

Flanged Bushing
For S20 Vise
1.656 x 1.5 x 0.5

Aftermarket Hyd-Mech Parts

Flanged Bushing
P HYD 340655

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Vise and Table

^$42.^{95 **}

P HYD 034.0212

Large Hand wheel /Blade Tensioning Hand Wheel

Aftermarket Hyd-Mech Part

Quality Aftermarket HYD-MECH Part

Large Hand wheel /Blade Tensioning Hand Wheel
P HYD 034.0212

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Head & Band wheel

^$63.⁶⁴

P HYD 394270

Seal Kit
2" Cylinder Seal Kit
Aftermarket Hydmech Parts

Aftermarket Hydmech Parts

P HYD 394270

Cylinder Seal Kit 2"

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Seal Kits

^$78.¹⁸

P HYD 809758

Chip Brush Drive Wheel

Aftermarket Hydmech Part

Chip Brush Drive Wheel

Product Details
photo below
Blade Width	1.00" Blade
Coolant	none
System	Chip Brushes

^$28.⁸³

P HYD 028.1041

Immersible Hydmech Coolant Pump
No Returns on Electrical Parts
3 Phase 230/460V 1/8HP 133mm

Quality Aftermarket Replacement Part for Hydmech Band Saw

Application

Immersible Coolant Pump 1/8HP 133mm 3 Phase 230/460V

Features

The entire unit is manufactured from high quality cast iron to ensure high stability, this eliminates problems with breakages over long periods of operations

Benefits

Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.

All Parts are backed by the sawblade.com 100% satisfaction guarantee

Product Details
photo below

^$178.^{86 **}

P HYD 341683

Pump, Coolant, Submersible
115V 60Hz 1.7A , No Plug, 12ft Cord
Aftermarket Coolant Pump

Replacement Coolant Pump for Hydmech Band Saws

The immersion-style pumps with no mechanical seals provide circulation of coolant and spraying of cutting oil in all types of Hydmech machines including Vertical. They are intended for use with non-flammable fluids that are compatible with pump construction materials.

Product Details
photo below
Blade Width	All Blade Widths
System	Coolant System

^$414.^{55 **}

P HYD 342315 MP10

10 Pack Blade Brush for Hydmech Saws
Fits all 3" Brushes on Hydmech Saws
Aftermarket Hydmech Band Saw Part

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Chip Brushes

Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

Chip Brush Troubleshooting

A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

Chip stays in tooth gullet
Teeth breaking off
Teeth cracking
Blade cracking from teeth up
Loss of tooth set

Product Details
photo below
Blade Width	All Blade Widths
Coolant	none
System	Chip Brushes

^$139.⁵⁰

P HYD 370585

Contact Block NO.
Contact Body
Aftermarket Hydmech Part