Item added to cart
Sawblade.com Logo 800.754.6920
Free Ground Shipping on Orders over $150 (except where noted)

Aftermarket Hydmech Replacement Parts

Compatible Hydmech Band Saw Replacement Parts

Features

  • Our Hydmech Band Saw Guides have no screws. We have innovated the HydMech Replacement Blade Guide system by robotically brazing on the carbide utilizing induction heating.
  • Our Compatible Hydmech Band Wheels are all Heat Treated Ductile Iron, CNC Machined to make them last longer and at lower cost.
  • Eliminate contacting a local Hydmech Dealer and spending valuable time on the phone when you can click and we ship!

Benefits

  • Most Compatible Hydmech Parts are up to 30% less than the manufacturer's OEM parts
  • Fast Delivery, we inventory a large selection of "wear parts"
  • Superior Hydmech Band Saw Parts solutions supported by sawblade.com
  • Backed by the Sawblade.com 100% Satisfaction Guarantee 
      Clear Filters
P HYD 370500
ASM P HYD 370500
Connector Hirschmann

Aftermarket Bandsaw Part

Quality Aftermarket Hydmech Part

  • Connector Hirschmann
  • Fits Hydmech H26/42
  • P HYD 370500
Product Details
photo below
Blade Width 2.625" Blade
Coolant none
System Electrical
Product Image
$33.09 **
P HYD 800735
ASM P HYD CRB-200-22-00
Carbide Side Guide 2"
Replacement Hyd-Mech Guides to Fit 2.00" Blade
Aftermarket Band Saw Part

Quality Aftermarket Replacement Part for Hydmech Band Saw

  • Bandsaw Blade Guides 2"

Aftermarket 2" Carbide Guide for Hydmech Machines

No Screws! We Braze the carbide on our guides means so there more surface area for blade support, no loose screws, shattered or missing pads,

Guide flatness within .0002" this creates a better, higher quality part at less cost.

Replaces Part #

  • CRB-200-22-00
  • CRB-200-21-00

4 guides are required per machine, These Guides support the Sawblade during cutting holding the blade Perpendicular to Saw Base. 

Product Details
photo below
Blade Width 2.00" Blade
Coolant none
System Blade Guide
Product Image
$234.36
P HYD 818075
ASM P HYD 818075
Drive Wheel, 1" Blade
16" w/ 48MM Bore Unhardened Flange
Aftermarket Hydmech Part

Aftermarket Hydmech Part

All of our Aftermarket Band wheels are made from Ductal Iron and Heat Treated for longer life!

P HYD 818075

16" Diameter, 48mm Bore, 1 1/2" Unhardened Flange

Fits Machines With Renolds or Canimex Gear boxes.

Product Details
photo below
Product Image
$728.19
P HYD CRB-200-22-00
ASM P HYD CRB-200-22-00
Carbide Side Guide 2"
Replacement Hyd-Mech Guides to Fit 2.00" Blade
Aftermarket Hydmech Part

Quality Aftermarket Replacement Part for Hydmech Band Saw

  • Bandsaw Blade Guides 2"

Aftermarket 2" Carbide Guide for Hydmech Machines

No Screws! We Braze the carbide on our guides means so there more surface area for blade support, no loose screws, shattered or missing pads,

Guide flatness within .0002" this creates a better, higher quality part at less cost.

Replaces Part #

  • CRB-200-22-00
  • CRB-200-21-00

4 guides are required per machine, These Guides support the Sawblade during cutting holding the blade Perpendicular to Saw Base. 

Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Blade Guide
Product Image
$214.83
P HYD 016.1803
ASM P HYD 016.1803
Blade Guard Idler Side

Aftermarket Hyd-Mech Part

Aftermarket HydMech Parts

  • Blade Guard Idler Side
  • P HYD 016.1803
Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Blade Guard
Product Image
$100.22
P HYD 393553
ASM 5100-200
Ring Retaining
External 2"
Aftermarket Hydmech Parts

Quality Aftermarket Hydmech Part

  • Ring Retaining External 2"
  • P HYD 393553
Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Band Wheels
Product Image
$2.79
P HYD 812887
ASM P HYD 812887
Idler Wheel, 1" Blade
16" w/ 6307 Bearing Unhardened
Aftermarket Hydmech Part

Aftermarket Hydmech Part

All of our Aftermarket Band wheels are made from Ductal Iron and Heat Treated for longer life!

P HYD 81812887

16" Diameter, 6307 Bearing, 1 1/2" Unhardened Flange

Fits Machines:

  • S20
  • S16
  • H12

Model bandsaws with a Idler Wheels that have 6307 Bearings

Product Details
photo below
Product Image
$620.31
P HYD 372280
ASM XACB-9212
Boot for tilt switch
Boot and Activator for Part #P Hyd 370540
Aftermarket Hydmech Part

Quality Aftermarket Replacement Part for Hydmech Band Saws

  • Boot and Activator for Part #P Hyd 370540
Product Details
photo below
Blade Width All Blade Widths
System Electrical
Product Image
$28.83
P HYD 391950
ASM P HYD 391950
Series Angle Scale
Label Aluminum Angle Scale 30 Degree
Aftermarket Hydmech Part

Quality Aftermarket Hydmech Part

  • Series Angle Scale
  • Aluminum Angle Scale 30 Degree
  • P HYD 391950
Product Details
photo below
Blade Width 1.00" Blade
Coolant none
System Base
Product Image
$38.18
P HYD 007.5321
ASM P HYD 007.5321
Blade Tension Pin

Aftermarket Hyd-Mech Part

Quality Aftermarket HYD-MECH Part

  • P HYD 007.5321
  • Blade Tension Pin
Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Head & Band wheel
Product Image
$61.09
P HYD 025.0555
ASM WW X 85MM MP10
Metric Chip Brush

Aftermarket Hydmech Part

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Chip Brushes
Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.
When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life
Chip Brush Troubleshooting
A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:
  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Chip Brushes
Product Image
$43.71
P HYD 028.1052.1
ASM P HYD 028.1052.1
Coolant Pump
PA 35-120 V.480.60 Hz
Aftermarket Hydmech Part

Quality Aftermarket Replacement Part for Hydmech Band Saw

Fits a Hydmech S-20

Voltage - 480

Motor - 019.3624

Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.

All Parts are backed by the sawblade.com 100% satisfaction guarantee
Product Details
photo below
Blade Width 1.00" Blade
Coolant Coolant System
System Coolant System
Product Image
$307.05 **
P HYD 340260
ASM P HYD 340260
Complete Guide Clamp Handle
Fits 1" Hydmech Machines
Aftermarket Hydmech Part

Complete Guide Clamp Handle,

Includes:

  • Bellville Washers  
  • 340260, Handle = S20-328-02
  • Lock Pin / Set Screw = S20-328-01
  • Bellville Washer = 3/4ö Bellville
  • Bolt = 5/16ö NC X 1/2ö LG
Product Details
photo below
Blade Width 1.00" Blade
Coolant none
System Guide Handles and Clamps
Blade Width 1.00" Blade
System Guide Handles and Clamps
Product Image
$112.53
P HYD 807433
ASM P HYD 807433
Guide Arm Coolant Kit

Aftermarket Hyd-Mech Part

Aftermarket Hyd-Mech Part

  • Guide Arm Coolant Kit
  • P HYD 807433
Product Details
photo below
Blade Width 1.25" Blade
Coolant none
System Coolant System
Product Image
$126.00 **
P HYD 809310
ASM P HYD 809310
Idler Wheel, 1 ¼" Blade
19" w/ 6309 Bearing Hardened Flange
Aftermarket Hydmech Part

Aftermarket Hydmech Part

All of our Aftermarket Band wheels are made from Ductal Iron and Heat Treated for longer life!

P HYD 809310

19" Diameter, 6309 Bearing, 1 1/2" Hardened Flange

Fits 45mm shaft out the box

40mm shafts require a spacer P HYD 810719 please call to request a spacer if this applies to your machine. 

Product Details
photo below
Blade Width 1.25" Blade
System Band Wheels
Product Image
$852.81
P HYD 813348
ASM P HYD 340260
Complete Guide Clamp Handle
Old Part Number Ref #: 340260
Aftermarket Hydmech Part

Complete Guide Clamp Handle,

Includes:

  • Bellville Washers  
  • 340260, Handle = S20-328-02
  • Lock Pin / Set Screw = S20-328-01
  • Bellville Washer = 3/4ö Bellville
  • Bolt = 5/16ö NC X 1/2ö LG
Product Details
photo below
Blade Width 1.25" Blade
Coolant none
System Guide Handles and Clamps
Blade Width 1.00" Blade
System Guide Handles and Clamps
Product Image
$122.76
P HYD 817495
ASM P HYD 817495
Piston with Seal Kit
Aftermarket Band Saw Part

Quality Aftermarket Hydmech Band Saw Part

Application

  • Piston with Seal Kit

Features

  • Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines.

Benefits

  • We only sell direct and pass lower costs to our customers.
  • All Parts are backed by the sawblade.com 100% satisfaction guarantee.
Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Seal Kits
Product Image
$156.55 **
P HYD 010.0827
ASM P HYD 010.0827
Rubber Wheel for Chip Brush

Aftermarket Bandsaw Part

Quality Aftermarket Hydmech Bandsaw Part

  • Rubber Wheel for Chip Brush
  • Fits Hydmech S20M
  • P HYD 010.0827
Product Details
photo below
Blade Width 1.25" Blade
Coolant none
System Chip Brushes
Product Image
$67.45 **
P HYD 010.0899
ASM P HYD 010.0899
Head Lift Spring

Aftermarket Hyd-Mech Part

Quality Aftermarket HydMech Part

  • Head Lift Spring
  • P HYD 010.0899
Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Head & Band wheel
Product Image
$160.69 **
P HYD 022.2152
ASM P HYD 022.2152
Electronic Tensioner

Aftermarket Hyd-Mech Part

Quality Aftermarket HYD MECH Part

Electronic Tensioner

Product Details
photo below
Blade Width All Blade Widths
Coolant none
System Electrical
Product Image
$633.18 **

Aftermarket replacement Hyd-Mech Band Saw Parts Lower price, Better Quality.  We innovate the manufacturing process on Hydmech Band Saw Replacement Parts by using robotic processes,  This delivers a better part, faster. 

Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.