Laguna Woodworking Tools

AUTO CLEAN KIT FITS C|FLUX:2 & 3

• This upgrade allows automatic cleaning on the 220V c:flux series cyclones. 
• It includes motor, cover plate & sensor that turns on when pressure rises inside the canister.

REVO 12|16: 10" EXPANSION SET INCLUDES ADAPTOR & TOOL REST EXTENSION

REVO 12|16: 20" EXTENSION

• 20 inch Cast Extension can be mounted to the right side of the Revo 12/16 lathe to extend the turning length by up to 20 inches. 
• It can also be mounted to the left side of the headstock to permit outboard turning.
• Comes with mounting hardware included.

REVO 12 L-BRACKET FOR LIGHT

REVO 12|16: ADJUSTABLE STAND

• Never has a Midi Lathe been supported this well. 
• Adjustable from 39"– 45" at spindle center & featuring ergonomic multi-tool shelving. 
• Net Weight is a whopping 81 lbs. making Revo 12|16 mounted on a stand the combined 199 lbs.

REVO 15|24: 20" EXTENSION

REVO 15|24: 12" TOOL REST

REVO 15|24 WHEEL SYSTEM

•  The wheel system allows the lathe to be easily moved around the shop.
• Fits Revo 15|24, all hardware included

REVO 18|36 & 24|36: 12" SWING-AWAY

• The 12″ Swing-Away Extension allows you to “Park” the tail-stock onto the Extension & then swivel it out of the way when not in use. 
• It also works as a 12″ bed extension.

REVO 18|36 & 24|36: 20" EXTENSION

• The 20″ Extension includes a solid cast iron tailstock support block for outboard turning. 
• The support block raises the tailstock back to centerline for stability & additional material support when outboard turning. 
• It is supplied with a Tool-Rest Extender. 
• The 20″ Extension can be mounted in 4 different positions including headstock or tailstock end of the bed as a bed extension, low on the leg for outboard turning, or perpendicular to the headstock for superior tool rest positioning.

REVO 18|36 & 24|36: 3" RISER KIT

• Complete kit that raises the lathe about 3". 
• Optional Wheel System will function with this addition as well as the 4 soft pads.
• The 3”Riser Blocks are made from solid cast iron, it raises the lathe to give you a centerline height of 44 ½” It works with both the pads that are included with Lathe and with the optional wheel system. 
• t is recommended for customers that want a more ergomic work position and find the lathe too low for them.

REVO 18|36 & 24|36: CAST IRON LEG W. PADS

• Cast Iron Support Leg is supplied with foot-pads. 
• Works in conjunction with Steel Bed

REVO 18|36 & 24|36: COMPARATOR

• Centers used to mount an original or template for visual copying.

REVO 18|36 & 24|36: HEADSTOCK GUARD

• Protects the area around the head-stock & mounts onto the bracket.
• Swivels out of the way when not in use.

LAGUNA HALOGEN LIGHT DOUBLE ARM 110V

• Fits 1412 - (1) Plug on Machine, 14bx 110 volt - (1) Plug on Machine
• Revo 1836 both 110 v and 220 volt - No outlets on machine, plugs into wall
• 110 volt
• 12 Volt/50 Watt bulb with Built-in Transformer
• Bulb: HALOSTAR 50 W 12 V GY6.35
• HALOSTAR Standard | Low-voltage halogen lamps with pin base

REVO 18|36 & 24|36: 58" STEEL BED (NO LEG)

• Extends the spindle-turning capacity from 36″ to 94″. 
• Requires support leg, not included.

REVO 18|36 & 24|36: VACUUM CHUCK SYSTEM

• The Revo 18|36 is pre-drilled & tapped to accept the vacuum inverter & rotary adapter. 
• Vacuum chuck & compressor required.

REVO 18|36 & 24|36: WHEEL SYSTEM

• The Wheel System is designed for maximum stability by allowing the Revo 18|36 to only sit on the four pads when in use. 
• When moving the Revo 18|36, all four swiveling casters are engaged.
• Dual Gas Struts make raising & lowering ultra-smooth.

ALED-BRACKET LED LIGHT BRACKET

• Used to mount the light to a wall or table. Note: L-Bracket is not needed to mount LED lights on: Laguna 14|12, 14BX, 18BX, 18CX Bandsaws & Revo 15, 18, 24 Lathes

LED LIGHT CLAMP

• LED Light Clamp
• Clamps the light onto anything