Item added to cart
Sawblade.com Logo 800.754.6920
Free Ground Shipping on Orders over $150 (except bandsaws)

Circular Saw Blades

QSAW Industrial Carbide Circular Saw Blades

Quality & Performance backed by Sawblade.com

Qsaw Industrial Circular Saw Blades are designed to deliver the highest performance in the industry. We use the highest grade carbide, precision laser cut blade bodies & state of the art industrial brazing techniques. This makes the for a premium blade designed for industrial use and to increase productivity.

 - QSAW CUTS COOLER: When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks. This allows you to handle the material quickly after the cut; no more waiting for the metal to cool down as required with other carbide or abrasive blades.

- QSAW CUTS FASTER: Qsaw blades simply cut faster than other carbide or abrasive blades. Our Qsaw steel blade can cut through mild steel plate quickly with few sparks.

- QSAW LASTS LONGER: other carbide and Abrasive blades wear down quickly. This limits cut quality and cut times. Qsaw Carbide Blade can reduce cost and time. The Qsaw Carbide Circular Saw Blade can last as long as 20x or more than other products.

- QSAW CUTS ACCURATELY: other blades can to flex and "walk" during a cut. Qsaw uses a laser cut blade body that is designed for accuracy and precision.

- QSAW CUTS SAFELY: no excessive dust, fumes, or smoke make for a safer work space. Qsaw blades produce fewer sparks and will run cooler. We put the all the heat in the chip! This will give you an overall safer alternative in your cutting operation.

        Clear Filters
CB S DIA D0704DH
Product Image for 7-1/4" X 5/8" X 4T Diablo Specialty Cutting
7-1/4" X 5/8" X 4T
Diablo Specialty Cutting
(PCD) Fiber Cement HardieBlade
Ideal For: All fiber cement products
Diablo HardieBlade is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products. Diablo's co-branded Diablo blade generates up to 5% less respirable dust*, while delivering the longest life in all fiber cement materials. The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades. The laser cut thin kerf design gives fast and precise cuts with less dust and waste. The anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat. Dimensions: 7-1/4 inch x 4-tooth PCD triple chip tooth with 5/8-inch diamond twist out arbor.
Product Details
photo below
Blade Diameter 7.25 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Fiber Cement
Arbor Diameter 0.625 in
Kerf 0.071 in
Max RPM 11000
Number of Teeth 4
Tooth Type PCD
Product Image
Only $69.97
CB S DIA D0744CD
Product Image for 7-1/4" X 5/8" X 44T Diablo Specialty Cutting
7-1/4" X 5/8" X 44T
Diablo Specialty Cutting
Composite Material/Plastics TrexBlade
Ideal For: High quality finish cuts in composite material and cellular PVC
Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a "must-have" tool for both professionals and DIYers planning composite decking projects. Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD® non-stick coating, and specific TiCo Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.
Product Details
photo below
Blade Diameter 7.25 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Composite
Arbor Diameter 0.625 in
Kerf 0.065 in
Max RPM 10000
Number of Teeth 44
Tooth Type MTCG
Product Image
Only $29.97
CB S DIA D1072CD
Product Image for 10" X 5/8" X 72T Diablo Specialty Cutting
10" X 5/8" X 72T
Diablo Specialty Cutting
Composite Material/Plastics TrexBlade
Ideal For: High quality finish cuts in composite material and cellular PVC
Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a "must-have" tool for both professionals and DIYers planning composite decking projects. Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD® non-stick coating, and specific TiCo Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Composite
Arbor Diameter 0.625 in
Kerf 0.098 in
Max RPM 7000
Number of Teeth 72
Tooth Type MTCG
Product Image
Only $64.97
CB S DIA D1084L
Product Image for 10" X 5/8" X 84T Diablo Specialty Cutting
10" X 5/8" X 84T
Diablo Specialty Cutting
Non-Ferrous Metals & Laminate Saw Blade
Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood *Note: Only cut laminate flooring on a 10" slide miter or table saw
Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. Diablo's blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Laminate
Arbor Diameter 0.625 in
Kerf 0.098 in
Max RPM 7000
Number of Teeth 84
Tooth Type TCG
Product Image
Only $58.97
CB S DIA D1284CD
Product Image for 12" X 1" X 84T Diablo Specialty Cutting
12" X 1" X 84T
Diablo Specialty Cutting
Composite Material/Plastics TrexBlade
Ideal For: High quality finish cuts in composite material and cellular PVC
Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. These new blades deliver maximum performance and highest quality of finish; making it a "must-have" tool for both professionals and DIYers planning composite decking projects. Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD® non-stick coating, and specific TiCo Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.
Product Details
photo below
Blade Diameter 12 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Composite
Arbor Diameter 1 in
Kerf 0.102 in
Max RPM 6000
Number of Teeth 84
Tooth Type MTCG
Product Image
Only $69.97
CB S FRE LI16MAA3
ASM CB S FRE LI16MAA3
120mm 12+12 Tooth
Carbide Tipped Adjustable Scoring Blade
Scoring Coating on Double-Sided Laminate Panels

Freud LI16MAA3 120mm with 12+12 Tooth Design Carbide Tipped Adjustable Scoring Blade for Scoring Coating on Double-Sided Laminate Panels

  • Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
  • Cuts double-sided laminate, chipboard or MDF
  • 120mm with 12+12 tooth design
Product Details
photo below
Blade Diameter 120mm
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Product Image
Only $121.60
CB S FRE LU3D20
ASM CB S FRE LU3D20
350mm 72 Tooth Carbide Tipped
Cutting and Sizing Double-Sided Laminate
Laminate Panels

Freud LU3D20 350mm 72 Tooth Carbide Tipped Blade for Cutting and Sizing Double-Sided Laminate Panels

  • 30mm arbor and flat triple chip tooth design with positive hook angle
  • For cutting double-sided laminate panels
  • 350mm 72 tooth blade
Product Details
photo below
Blade Diameter 350 mm
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Product Image
Only $170.43
CB S FRE LU82M010
Product Image for 10" X 5/8" X  60T TCG Freud Specialty Cutting
10" X 5/8" X 60T TCG
Freud Specialty Cutting
Heavy Duty Multi-Purpose Blade
Ideal For: Stacked Chipboard And Manmade Materials. Crosscuts (1/2" to 2-3/4") & Rips (3/4" to 3/8" ).
This multi-purpose blade will cut stacks of manmade wood products as well as hardwood and softwood up to 2-3/4" thick. The blade’s deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease. Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut General Purpose
Arbor Diameter 0.625 in
Kerf 0.126 in
Max RPM 7000
Number of Teeth 60
Tooth Type TCG
Product Image
Only $39.97
CB S FRE LU92M010
ASM CB S FRE LU92M010
10" x ⅝ x 60T Laminate
Freud Laminate Saw Blade
Industrial Thick-Stock Laminate Saw Blade

Freud LU92M010 10-Inch 60 Tooth MTCG Ultimate Laminate Cutting Saw Blade with 5/8-Inch Arbor

  • 10-inch, 60TPI, MTCG, 5/8 inch arbor
  • Ultimate laminate blade for corian, melamine, laminates
  • Each tooth has modified triple chip grind
  • Zips through solid surface or single & double laminates
  • Chip-free finish
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Product Image
Only $88.63
CB S FRE LU94M010
Product Image for 10" X 5/8" X  80T TCG Freud Specialty Cutting
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Plastic Blade
Ideal For: Plexiglass and Plastics. Depth of cut (1/4" to 1-5/8").
This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. By combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut. These blades produce less heat keeping the cut edge crisp.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Plastics
Arbor Diameter 0.625 in
Kerf 0.11 in
Max RPM 7000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $87.97
CB S FRE LU95R010
ASM CB S FRE LU95R010
10" X 5/8" X 72T TCG
Freud Specialty Cutting
Solid Surface Blade

Ideal For: Solid surface materials such as DuPont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®. Depth of cut (1/4" to 1-5/8").

With this ultimate solid surface blade, there is no need for stabilizers. This blade features teeth with a specially designed triple chip grind for leaving swirl-free cuts in solid surface materials such as DuPont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®. The laser-cut anti-vibration slots reduce the sideways movement of the cutting edge against the solid surface material, dramatically extending cutting life. With this ultimate solid surface blade, there is no need for stabilizers.

Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Plastics
Arbor Diameter 0.625 in
Kerf 0.126 in
Max RPM 7000
Number of Teeth 72
Tooth Type TCG
Product Image
Only $126.47
CB S FRE LU96R010
Product Image for 10" X 5/8" X  80T TCG Freud Specialty Cutting
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Thin Kerf Double Sided Laminate/Melamine
Ideal For: Double-sided laminates, melamine & veneered plywood. Depth of cut (1/4" min to 1-5/8" max).
The LU96R is a thin kerf blade that is designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Arbor Diameter 0.625 in
Kerf 0.091 in
Max RPM 8000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $76.97
CB S FRE LU97R010
Product Image for 10" X 5/8" X  80T TCG Freud Specialty Cutting
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Double Sided Laminate/Melamine Blade
Ideal For: Excellent finish on the top and bottom of laminates, melamine & veneered plywood. Depth of cut (1/4" min to 1-5/8" max).
Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. The laser-cut anti-vibration design yields the plate acoustically dead. This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Arbor Diameter 0.625 in
Kerf 0.126 in
Max RPM 7000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $104.47
CB S FRE LU98R007
ASM CB M FRE LU98R007
7" x ⅝" x 56 Tooth
Freud Laminate Cutting Blade
Superior 7-Inch 56 Tooth TCG Laminate Cutting Saw Blade

Freud LU98R007 Superior 7-Inch 56 Tooth TCG Laminate and Wood Cutting Saw Blade with 5/8-Inch Arbor and PermaShield Coating


  • Laser cut blade bodies and expansion slots
  • Kickback reducing design
  • Perma-SHIELD coating
  • Covered by Freud's limited lifetime warranty
Product Details
photo below
Blade Diameter 7 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Product Image
Only $84.44
CB S FRE LU98R010
Product Image for 10" X 5/8" X  80T TCG Freud Specialty Cutting
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Single Sided Laminate/Melamine Blade
Ideal For: Single-Sided Laminates, Chip Board And Other Man-made Materials. Depth of cut (1/2" min to 2-3/4" max).
This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines. The Perma-SHIELD coating makes these blades resistant to friction and heat build-up. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. The 10° hook angle and a triple chip grind provide fast cuts and long cutting life.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Arbor Diameter 0.625 in
Kerf 0.126 in
Max RPM 8000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $104.47
CB S FRE SBOX8
Product Image for 8" Box Joint Set Freud Box Joint Set
8" Box Joint Set
Freud Box Joint Set
Box Joint Cutter Set
Ideal For: Making box joint construction easy
To create a perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade.
Set includes 2 blades, instructions for making box joints and building a box joint jig.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Arbor Diameter 0.625 in
Max RPM 6000
Number of Teeth 20
Tooth Type Carbide
Product Image
Only $94.97
CB S FRE SD208
Product Image for 8" Stack Dado Freud Dado Set
8" Stack Dado
Freud Dado Set
Professional Dado Set
Ideal For: Ideal for underpowered saws
To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
Set includes 2 blades, 3 chippers, spacers, shim set and carrying case.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Material to Cut Dado
Max RPM 6000
Number of Teeth 12
Product Image
Only $99.97
CB S FRE SD508
Product Image for 8" Super Dado Freud Dado Set
8" Super Dado
Freud Dado Set
Super Dado Sets
Ideal For: For cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
Set includes 2 blades, 6 chippers, shim set and carrying case.
Adjusts in 1/32" increments.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Arbor Diameter 0.625 in
Max RPM 6000
Number of Teeth 24
Tooth Type Carbide
Product Image
Only $199.97
CB S FRE SD508OLH
ASM CB S FRE SD508OLH
8" X 5/8" Bore
Dado Outside Blade Left Hand

Replacement Left Hand Outside Blade for SD508 Series Dado

Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Product Image
Only $97.85
CB S FRE SD508ORH
ASM CB S FRE SD508ORH
8" X 5/8" Bore
Dado Outside Blade Right Hand

Right Hand Outside Blade for SD508 Series Dado

Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Product Image
Only $70.39

We stock Diablo, Evolution and Q-Saw blades to fit a wide range of saws. Whether you need to cut Metal, Wood, Plastics or other specialty materials, we have the right blades for your cutting needs. From 4 in. to 15 in., thin kerf and normal kerf, High Speed and Low Speed blades, take a look at our wide selection of blades.