4‑1/2" Flap Disc 60 Grit ‑ Type 29

Diablo's Steel Demon™ flap discs feature a premium zirconium grain blend for up to 10X faster material removal when compared to standard grinding wheels. The flap discs' special flap design offers flexibility and provides for a cushioned grinding effect. Diablo's high performance flap discs combine two steps in one by simultaneously grinding and polishing.

4‑1/2" Diamond Metal Cut‑Off Blade

Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.

 Non-Ferrous Metals & Laminate Saw Blade #D1084L

• 10" X 5/8" X 84T
• Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood
• Note: Only cut laminate flooring on a 10" slide miter or table saw
• Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. 
• Diablo's blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

Composite Material/Plastics TrexBlade #D1284CD

• Diablo Specialty Cutting
• Composite Material/Plastics TrexBlade
• 12" X 1" X 84T
• Ideal for high quality finish cuts in composite material and cellular PVC
• Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials.
• These new blades deliver maximum performance and highest quality of finish; making it a "must-have" tool for both professionals and DIYers planning composite decking projects. 
• Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD^® non-stick coating, and specific TiCo^™ Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.

This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. By combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut. These blades produce less heat keeping the cut edge crisp.

4‑1/2" Corner‑Edge Flap Disc 40 Grit

Diablo's Steel Demon™ Corner-Edge™ flap discs feature a premium zirconium blend for up to 10X faster material removal when compared to standard grinding wheels. The flap discs' special flap design offers flexibility and provides for a cushioned grinding effect. Diablo's high performance flap discs combine two steps in one by simultaneously grinding and polishing .

7‑1/4 in. x 36 Tooth Wood & Metal Carbide Saw Blade

Diablo’s new 7-1/4” Wood & Metal saw blade is the industry’s first multi-purpose saw blade for cutting clean wood and wood with nails, up to 2-1/4” material thickness; and metal ranging from 3/32”-1/4” wall thickness and 1/4”-1” diameter. The versatility of these new blades provides the ability to use the same blade to cut wood and metal so now users can focus on completing the job more efficiently rather than wasting time with changing tools and saw blades. The Diablo made TiCo carbide tips, which are specially designed for this blade, coupled with the blade’s Chamfered-Alternate Tooth Design (C-ATB) tooth design provides impact resistance for cutting wood with nails as well as the durability for creating clean, burr free cuts in metal. Optimized for corded and cordless saws, this new blade cuts 2X lumber, wood with nails, angle iron, channel, flat bar, steel studs and threaded rod.

4‑1/2" Metal Cut Off Disc ‑ Thin Kerf (25 Pack)

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

(PCD) Fiber Cement HardieBlade #D0704DH

• Diablo Specialty Cutting
• (PCD) Fiber Cement HardieBlade
• 7-1/4" X 5/8" X 4T
• Ideal for All fiber cement products
• Diablo HardieBlade^™ is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade recommended by James Hardie Building Products. 
• Diablo's co-branded Diablo blade generates up to 5% less respirable dust, while delivering the longest life in all fiber cement materials. 
• The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades. 
• The laser cut thin kerf design gives fast and precise cuts with less dust and waste. 
• The anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat. 
• Dimensions: 7-1/4 inch x 4-tooth PCD triple chip tooth with 5/8-inch diamond twist out arbor.

Composite Material/Plastics TrexBlade #D0744CD

• 7-1/4" X 5/8" X 44T
• Ideal For: High quality finish cuts in composite material and cellular PVC
• Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. 
• These new blades deliver maximum performance and highest quality of finish; making it a "must-have" tool for both professionals and DIYers planning composite decking projects.
• Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD^® non-stick coating, and specific TiCo^™ Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.

Fiber Cement HardieBlade Saw Blade #D1006DH

• The only approved James Hardie polycrystalline diamond ( PCD ) tipped fiber cement saw blade. Developed by James Hardi and Freud Diablo for all James Hardie fiber cement products and other fiber cement brand products
• The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades
• The laser cut thin kerf design gives fast and precise cuts with less dust and waste
• Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat
• 10" Diameter, 5/8" Arbor, 6 TCG Teeth, TCG Grind, .087" Kerf (K), 10° Hook Angle blade

Composite Material/Plastics TrexBlade #D1072CD

• 10" X 5/8" X 72T
• Ideal For: High quality finish cuts in composite material and cellular PVC
• Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials. 
• These new blades deliver maximum performance and highest quality of finish 
• A "must-have" tool for both professionals and DIYers planning composite decking projects.
• Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD^® non-stick coating, and specific TiCo^™ Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.

Fiber Cement HardieBlade Polycrystalline Diamond Tipped Saw Blade #D1072CD

• Diablo HardieBlade is the only approved PCD (PolyCrystalline Diamond) tipped fiber cement blade.
• These blades generate up to 50% less respirable dust while delivering the longest life in all fiber cement materials. Diablo PCD HardieBlades feature a unique spark-eroded Triple Chip grind for long life.
• Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Perma-Shield coating to reduce heat.
• Ideal for all fiber cement products.
• They are perfect for full time use in heavy-duty applications like cutting multiple pieces of fiber cement board
• 12" Blade Diameter, 1" Arbor, 96 TCG Teeth, TCG Grind, .087" Kerf (K), 10° Hook Angle blade

Pallet Ripping Blade #LCL7M10052

• This blades includes innovative features including four-strobes versus the industry standard of two, a Thin Kerf option for less waste and increased board yield as well as larger depth of tooth design for superior impact resistance and more resharpenings.
• Four-strobes allows the blade to cut more efficiently, reducing the amount of stress on the blade
• Flat Tooth Grind technology for more wear resistance and increased cutting life
• Applicable for soft and hard woods
• 10" Blade Diameter, 2.375" Arbor, 80 Teeth, FLAT Grind, .126" Kerf (K), 25° Hook Angle, 2.2" Plate (P) blade

Pallet Ripping Blade #LCL7M10056

• Flat Tooth Grind technology for more wear resistance and increased cutting life
• This blade includes innovative features including four-strobes versus the industry standard of two, a Thin Kerf option for less waste and increased board yield as well as larger depth of tooth design for superior impact resistance and more resharpenings.
• Exclusive Tico Hi-Density Carbide is designed and manufactured by Freud specifically for each cutting application to maximize cutting life and material finish in a variety of materials
• Perma-shield non-stick coating prevents build up on the blade surface and keeps the blade running cooler and cleaner, for better cut quality and longer blade life
• 10" Blade Diameter, 2.375" Arbor, 96 Teeth, FLAT Grind, .157" Kerf (K), 25° Hook Angle, 2.5" Plate (P) blade

Pallet Ripping Blade #LCL7M10057

• Industry first four-strobes versus current market 2-strobe design for less heat and binding on the blade body. Especially when cutting wet material, four-strobes allows the blade to cut more efficiently, reducing the amount of stress on the blade.
• Flat Tooth Grind technology for more wear resistance and increased cutting life
• Increased Depth of the Tooth for additional impact resistance and more resharpenings
• Exclusive Tico Hi-Density Carbide is designed and manufactured by Freud specifically for each cutting application to maximize cutting life and material finish in a variety of materials
• Perma-shield non-stick coating prevents build up on the blade surface and keeps the blade running cooler and cleaner, for better cut quality and longer blade life
• 12" Blade Diameter, 2.375" Arbor, 100 Teeth, FLAT Grind, 0.126" Kerf (K), 25° Hook Angle, 2.2" Plate (P) blade

Pallet Ripping Blade #LCL7M10058

• Industry first four-strobes versus current market 2-strobe design for less heat and binding on the blade body. Especially when cutting wet material, four-strobes allows the blade to cut more efficiently, reducing the amount of stress on the blade.
• Flat Tooth Grind technology for more wear resistance and increased cutting life
• Increased Depth of the Tooth for additional impact resistance and more resharpenings
• Exclusive Tico Hi-Density Carbide is designed and manufactured by Freud specifically for each cutting application to maximize cutting life and material finish in a variety of materials
• Perma-shield non-stick coating prevents build up on the blade surface and keeps the blade running cooler and cleaner, for better cut quality and longer blade life
• 12" Blade Diameter, 2.375" Arbor, 100 Teeth, FLAT Grind, 0.157" Kerf (K), 25° Hook Angle, 2.5" Plate (P) blade

Pallet Ripping Blade #LCL7M10059

• Industry first four-strobes versus current market 2-strobe design for less heat and binding on the blade body. Especially when cutting wet material, four-strobes allows the blade to cut more efficiently, reducing the amount of stress on the blade.
• Flat Tooth Grind technology for more wear resistance and increased cutting life
• Increased Depth of the Tooth for additional impact resistance and more resharpenings
• Exclusive Tico Hi-Density Carbide is designed and manufactured by Freud specifically for each cutting application to maximize cutting life and material finish in a variety of materials
• Perma-shield non-stick coating prevents build up on the blade surface and keeps the blade running cooler and cleaner, for better cut quality and longer blade life
• 12" Blade Diameter, 2" Arbor, 100 Teeth, FLAT Grind, 0.126" Kerf (K), 25° Hook Angle, 2.2" Plate (P) blade