Item added to cart
Sawblade.com Logo 800.754.6920
Free Ground Shipping on Orders over $150 (except bandsaws)

Circular Saw Blades

Application

  • When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
  • Metal Cutting Carbide Machines & Blades replace abrasive cut off saws and last 20x Longer
  • QSaw, Freud, and Diablo have blades for specific wood cutting, laminate, and speciality materials

Features

  • Qsaw Industrial Circular Saw Blades are designed to deliver the highest performance in the industry. 
  • We use the highest grade carbide, precision laser cut blade bodies & state of the art industrial brazing.
  • This makes for a premium blade designed for industrial use and to increase productivity.

Benefits

  • Qsaw Cuts Cooler,  When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
  • Qsaw Cuts Faster,  Qsaw blades simply cut faster than other carbide or abrasive blades
  • Qsaw Lasts Longer,  other carbide and Abrasive blades wear down quickly. The Qsaw Carbide Circular Saw Blade can last up to 20x longer than other products on the market, if not more.
  • Qsaw Cuts Accurately, other blades can to flex and "walk" during a cut. Qsaw uses a laser cut blade body that is designed for accuracy and precision.
        Clear Filters
-CB X DIA DBD070063701F
ASM CB DIA DBD070063701F
7"x 7/8" ARBOR x 1/8" THICKNESS
METAL DC CUT-OFF DISCS

7" Metal Cut Off Disc ‑ Type 27

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

  • Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
  • For use on metal applications: steel, stainless, cast iron, sheet metal
  • Type 27 - Depressed Center
Ideal For: Medium Duty
Suggested Projects: Cutting Angle Iron, Metal Slotting, Cutting Steel Studs, Fabricating Sheet Metal
Product Details
photo below
Blade Diameter 7 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Metal
Product Image
Only $4.42
-CB X FRE LCL7M10035
CAT CB FRE LCL7M10035
10" x 5/8" ARBOR x 60T ATB SOLID SURFACE BLADE, 2.4 KERF

10" x 5/8" ARBOR x 60T ATB SOLID SURFACE BLADE, 2.4 KERF

Product Details
photo below
Product Image
Only $66.40
-CB X FRE LU5E06
ASM CB FRE LU5E06
305MM x 1" BORE x 120T TCG CARBIDE TIPPED FOR NON FERROUS METAL BLADE, 3 KERF

Sawblade, Freud

305MM x 1" BORE x 120T TCG CARBIDE TIPPED FOR NON FERROUS METAL BLADE, 3 KERF

Product Details
photo below
Product Image
Only $164.53
-FDC X DIA DCX045040N01F
ASM FDC DIA DCX045040N01F
4-1/2" FLAP DISC CONICAL

40 GRIT

4‑1/2" Flap Disc 40 Grit ‑ Type 29

Diablo's Steel Demon™ flap discs feature a premium zirconium grain blend for up to 10X faster material removal when compared to standard grinding wheels. The flap discs' special flap design offers flexibility and provides for a cushioned grinding effect. Diablo's high performance flap discs combine two steps in one by simultaneously grinding and polishing.

  • Premium zirconium grain blend is a superior quality formulation designed for fast material removal and long sanding life
  • Delivers up to 10 times faster material removal than a bonded grinding wheel
  • Type 29 - Conical design
  • Arbor - 7/8" (No HUB)
Ideal For: Grinding & Polishing Meta
Product Details
photo below
Blade Diameter 4.50 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Metal
Product Image
Only $9.18
BIT FRE 87-108
ASM BIT FRE 87-108
8 PIECE CNC ROUTER BIT
SIGNMAKING SET

8 Piece CNC Router Bit Signmaking Set

8 piece Sign Making CNC Router Bit Set, 1/4" Shank. Ideal for Signmaking, Lettering and Engraving in a variety of materials. Set Includes: Up Cut Spiral Ball Nose- Solid Carbide (#72-101), Up Cut Spiral Ball Nose- Solid Carbide (#72-202), 6.2º x 1/32" Tapered Ball Tip -Solid Carbide (#72-300), 5.4ºx 1/16" Tapered Ball Tip -Solid Carbide (#72-400), Up Cut Spiral Solid Carbide (#75-102), Down Spiral Solid Carbide (#76-100), 3/4" 90º Degree V-Groove (#20-108), and 1/2" 60º Degree V-Groove (#20-152).

  • Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish
  • Enhanced TiCo™ Super Density Carbide with chromium designed and manufactured by Freud for 2x cutting life
  • Advanced cutting geometry for superior chip evacuation and finish quality
Ideal For: Ideal for wood, wood composites, plastics (hard & soft), aluminum for 2D & 3D carving, and sign making.
Product Details
photo below
Blade Diameter N/A
Blade Type Specialty Blades
Brand Freud
Material to Cut Multiple Purpose
Product Image
Only $313.00
BIT FRE 87-208
ASM BIT FRE 87-208
8 PIECE CNC ROUTER BIT
GENERAL PURPOSE SET

8 Piece CNC Router Bit General Purpose Set

8 piece General Purpose CNC Router Bit Set, 1/4 Inch Shank specifically designed for a wide variety of applications. Set Includes: Up Cut Spiral Ball Nose- Solid Carbide (#72-101), 7.5º x 3/16" Engraving V-Groove- Solid Carbide (#70-103), O-Flute Up Spiral Bit -Solid Carbide (#73-762), Up Cut Spiral Solid Carbide (#75-101), O- Flute Up Spiral Solid Carbide (#75-025), O- Flute Straight Solid Carbide (#71-040), 1/2" 90º Degree V-Groove (#20-104), and 1/2" 60º Degree V-Groove (#20-152).

  • Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish
  • Enhanced TiCo™ Super Density Carbide with chromium designed and manufactured by Freud for 2x cutting life
  • Advanced cutting geometry for superior chip evacuation and finish quality
Ideal For: Ideal for wood, wood composites, plastics (hard & soft), aluminum for 2D & 3D carving, sign making, and engraving.
Product Details
photo below
Blade Diameter N/A
Blade Type Specialty Blades
Brand Freud
Material to Cut Multiple Purpose
Product Image
Only $240.00
BIT FRE 96-100
ASM BIT FRE 96-100
8 PIECE DOEVTAIL INCRA JAG ROUTER BIT SET, WITH 1/4" SHANK

Precisely designed to meet the requirements of the Incra Jig®, these 8 Piece sets allow you to route tight-fitting dovetail and box joints with your table-mounted router equipped with an Incra Jig®. Follow the directions in the Incra Jig® manual and use the correct bit number for the joint you want to create. Both sets contain 2 Straight and 6 Dovetail bits, packed in an attractive wooden storage box. Use them to rout hardwood, softwood, plywood or composites. These bits also may be used with other router jigs.

  • Bits precisely match the requirements of the Incra Jig®
  • Includes 8 bits packed in an attractive wooden storage box
  • Use on table-mounted portable routers equipped with Incra Jig®
  • Routs hardwood, softwood, plywood or composites
  • Freud Perma-SHIELD® Coating
Ideal For: routing tight-fitting dovetail and box joints with an Incra Jig®
Product Details
photo below
Blade Diameter N/A
Blade Type Specialty Blades
Brand Freud
Material to Cut Multiple Purpose
Product Image
Only $179.98
CB DIA D0624A
ASM CB DIA D0624A
6 1/2" x 5/8" ARBOR x 24T
FRAMING SAW BLADE

6‑1/2 in. x 24‑Tooth Tracking Point Framing Saw Blade

Diablo’s next generation 6-1/2 in. 24-teeth Tracking Point saw blade features the first ever, Tracking Point tooth design and an enhanced anti-vibration design. Diablo’s Tracking Point tooth design delivers maximum life and durability with effortless cutting performance for 5X longer life, 2X more durability and increased stability. This is the only 6-1/2 in. saw blade in the market to include Tracking Point tooth design; making it ideal for framers, roofers, remodelers, concrete formers or anyone wanting ultimate cutting performance in pressure treated wood, 2x lumber, plywood, hardwoods and softwoods.

  • Tracking Point tooth design acts as a “rudder” to provide straight cuts and control carbide wear on the tooth for up to 5X longer cutting life versus other blades
  • Tracking Point doubles the carbide surface area for greater impact resistance and double the durability in nail-embedded wood
  • Tracking Point delivers extreme cutting efficiency in corded and cordless saws by offering 65% more cuts per battery charge in cordless saws versus other blades
  • Enhanced anti-vibration design provides the ideal combination of stability and rigidity
  • TiCo high-density carbide for maximum cutting life and performance
  • Perma-SHIELD non-stick coating protects the blade against heat, gumming and corrosion
  • Ultimate framing blade is ideal for both corded and cordless applications
Ideal For: General construction applications, including fast, efficient ripping and crosscutting
Suggested Projects: Framing, Remodeling/Demolition, Siding/Decking
Product Details
photo below
Blade Diameter 6.5 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Framing
Product Image
Only $15.00
CB DIA D0736GP
ASM -CAT D0736GP
7.25 Wood and Metal

7‑1/4 in. x 36 Tooth Wood & Metal Carbide Saw Blade

Diablo’s new 7-1/4” Wood & Metal saw blade is the industry’s first multi-purpose saw blade for cutting clean wood and wood with nails, up to 2-1/4” material thickness; and metal ranging from 3/32”-1/4” wall thickness and 1/4”-1” diameter. The versatility of these new blades provides the ability to use the same blade to cut wood and metal so now users can focus on completing the job more efficiently rather than wasting time with changing tools and saw blades. The Diablo made TiCo carbide tips, which are specially designed for this blade, coupled with the blade’s Chamfered-Alternate Tooth Design (C-ATB) tooth design provides impact resistance for cutting wood with nails as well as the durability for creating clean, burr free cuts in metal. Optimized for corded and cordless saws, this new blade cuts 2X lumber, wood with nails, angle iron, channel, flat bar, steel studs and threaded rod.

  • Specially formulated Diablo TiCo Carbide withstands impact, reduces wear and lasts longer in wood and metal cutting applications
  • Tri-Metal Shock Resistant Brazing allows carbide tips to withstand extreme impact for maximum durability in wood and metal applications
  • Perma-SHIELD non-stick aluminum coating protects the blade against heat, gumming and corrosion
  • Advanced Laser Cut Stabilizer Vents traps noise and vibration for maximum stability, keeping the blade cool with accurate cuts in wood and metal
  • Laser Cut Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and long cutting life in wood and metal
  • Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation on corded and cordless saws
  • Cuts up to 2-1/4” material thickness in clean wood & wood with nail cutting applications
  • Cuts 3/32”-1/4” wall thickness in steel studs, channel, angle iron, pipe, tubing, plate and bar stock
  • Cuts 1/4" – 1” diameter threaded rod
Ideal For: Wood with nails as well as the durability for creating clean, burr free cuts in metal.
Product Details
photo below
Blade Diameter 7.25 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Multiple Purpose
Product Image
Only $25.97
CB DIA D1050CF
ASM CB DIA D1050CF
10" x 1" ARBOR x 50T
TCG METAL CUTTING SAW BLADE

10 in. x 50 Tooth Cermet Metal and Stainless Steel Cutting Saw Blade

Diablo’s new Steel Demon Cermet saw blade series is redefining metal cutting, and the jobsite, by introducing safer, exclusive innovation that allows users to cut both mild and stainless steels for 40X longer life versus standard carbide-tipped metal cutting saw blades. The specially formulated Cermet (Ceramic and Metallic) teeth provide high heat tolerances and increased hardness for superior wear and ultimate cutting life. Featuring a special Triple Chip Grind and Perma-Shield coating, these blades slice through the toughest of metals to produce precise cuts with less sparks and burr-free finishes that require no rework. The thin-kerf body and advanced laser cut anti-vibration stabilizer vents reduce vibration and noise to allow the blades to quickly shear through metal with ease and accuracy. The ability to cut through both mild and stainless steel eliminates the need for individually dedicated saw blades, offering a one-blade solution for ultimate metal cutting performance and unmatched value story, forever changing the metal cutting industry.

  • Cermet (Ceramic and Metallic) teeth provide a high heat tolerance and increased hardness for superior wear and ultimate cutting life; lasting up to 40X longer than standard carbide metal cutting saw blades
  • Triple Chip Tooth design provides less sparks, burr-free finishes that require no-rework, and longer cutting life
  • Advanced Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping the blade cool for straight, accurate cuts in metal cutting applications
  • Tri-Metal Shock Resistant Brazing, a three metal brazing system, allows Cermet teeth to withstand extreme impact for maximum durability
  • Laser Cut Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and long cutting life in metal cutting applications
  • Perma-SHIELD® non-stick coating resists heat build-up by protecting the blade against gumming and corrosion
  • Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation when in use on the saw
  • Cuts 1/8”-1/2” wall thickness in steel studs, angle iron, flat bar, channel, and EMT conduit
  • Cuts 1/4”-1” wall thickness in plate and bar stock
  • Cuts 1/2"-2” diameter threaded rod
  • Use with a dedicated low RPM metal cutting saw
  • Clamp down your materials
  • Use right tooth count to thickness of material
  • Use correct cutting speed and let the tool do the work (do not cut too slow)
Ideal For: Studs & Tubing (Wall thickness 1/8" (11 gauge) min 1/2" max); Plates & Bars (Thickness 1/4" (11 gauge) min 1" max); RODS (Diameter 1/2" min 2" max) - Studs/Channels, Angle Iron, Plates/Bars, Pipes/Tubes, EMT Conduit, Threaded Rod
Suggested Projects: Metalworking
Product Details
photo below
Blade Diameter 10 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Metal
Product Image
Only $72.67
CB DIA DBD045040101F
CAT CB DIA DBD045040101F
4
1/2" x 7/8" ARBOR x 0.04" THICKNESS THIN KERF METAL CUT OFF DISC BLADE

4‑1/2" Metal Cut Off Disc ‑ Thin Kerf

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

  • Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
  • For use on metal applications: steel, stainless, cast iron, sheet metal
  • Type 1 - Flat
Ideal For: Heavy Duty
Suggested Projects: Cutting Angle Iron, Metal Slotting, Cutting Steel Studs, Fabricating Sheet Metal
Product Details
photo below
Product Image
Only $2.13
CB DIA DBD045040115F
ASM CB DIA DBD045040115F
4-1/2" x 7/8" ARBOR x 0.04" THICKNESS
Metal Cut Off Disc Blade
(15 PACK)

4‑1/2" Metal Cut Off Disc ‑ Thin Kerf (15 Pack)

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

  • Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
  • For use on metal applications: steel, stainless, cast iron, sheet metal
  • Type 1 - Flat
Ideal For: Heavy Duty
Suggested Projects: Cutting Angle Iron, Metal Slotting, Cutting Steel Studs, Fabricating Sheet Metal
Product Details
photo below
Product Image
Only $27.24
CB DIA DBD045040125F
ASM CB DIA DBD045040125F
4-1/2" x 7/8" ARBOR x 0.04" THICKNESS
METAL CUT OFF DISC BLADE
(25 PACK)

4‑1/2" Metal Cut Off Disc ‑ Thin Kerf (25 Pack)

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

  • Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
  • For use on metal applications: steel, stainless, cast iron, sheet metal
  • Type 1 - Flat
Ideal For: Heavy Duty
Suggested Projects: Cutting Angle Iron, Metal Slotting, Cutting Steel Studs, Fabricating Sheet Metal
Product Details
photo below
Blade Diameter 4.50 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Metal
Product Image
Only $47.78
CB DIA DDD045DIA101F
ASM CB DIA DDD045DIA101F
4‑1/2" x 7/8" ARBOR
DIAMOND DISC
METAL CUT OFF BLADE

4‑1/2" Diamond Metal Cut‑Off Blade

Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.

  • Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut-off disc
  • Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
  • Maintains cutting diameter for consistent cutting results
  • Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
  • Diamond wheels do not shatter or break when dropped
Ideal For: Grinding & Polishing Metal
Product Details
photo below
Blade Diameter 4.50 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Metal
Product Image
Only $18.75
CB M DIA D0530F
ASM CB M DIA D0530F
5-3/8" X 10MM X 30T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0530F

  • TiCo Hi-Density Carbide specifically designed for metal cutting
  • Triple Chip Design for longer cutting life in metal
  • Laser cut stabilizer vents trap noise and vibration and stabilize blade
  • Tri-metal shock-resistant brazing for stronger carbide teeth.
  • Perma-Shield Non-Stick Coating reduces friction, heat build up which adds to longer blade life
  • Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread** Note: *Mild Steel only - 1/8" max. wall thickness **Mild steel only - 1" max diameter
  • 5.375" Blade Diameter, 30mm Arbor, 30 TCG Teeth, TCG Grind, .059" Kerf (K), 2° Hook Angle, .039" Plate (P) blade
Product Details
photo below
Blade Diameter 5.375 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 10 mm
Kerf 0.049 in
Max RPM 12000
Number of Teeth 30
Tooth Type TCG
Product Image
Only $23.97
CB M DIA D0530FM
ASM CB M DIA D053830FMX
5-3/8" X 20MM X 30T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade  #D0530FM

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 5-3/8" X 20MM X 30T
  • Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
  • Mild Steel only - 1/8" max. wall thickness
  • Mild steel only - 1" max diameter 
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting
  • Enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
  • With up to 40X the life of standard abrasive disc
  • Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • Diablo's blade is designed to fit Panasonic and Similar Metal Cutting Saws
  • 5-3/8-Inch diameter by 3T, 2mm arbor, 31+ RPM, 1/8-Inch max cut thickness, mild steel
Product Details
photo below
Blade Diameter 5.375 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 10 mm
Kerf 0.059 in
Max RPM 12000
Number of Teeth 36
Tooth Type ATB
Product Image
Only $23.97
CB M DIA D0648F
ASM CB M DIA D0648F
6-1/2" X 5/8" X 48T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0648F

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 6-1/2" X 5/8" X 48T
  • Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
  • Mild Steel only - 1/8" max. wall thickness
  • Mild steel only - 1" max. diameter
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • 6-1/2" diameter, 48T TCG, 5/8" arbor.
Product Details
photo below
Blade Diameter 6.5 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 0.625 in
Kerf 0.071 in
Max RPM 11000
Number of Teeth 48
Tooth Type TCG
Product Image
Only $30.97
CB M DIA D0649F
ASM CB M DIA D0649F
6-3/4" X 20MM X 48T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0649F

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 6-3/4" X 20MM X 48T
  • Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
  • Mild Steel only - 1/8" max. wall thickness, 1" max diameter 
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
Product Details
photo below
Blade Diameter 6.75 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 20 mm
Kerf 0.071 in
Max RPM 11000
Number of Teeth 48
Tooth Type TCG
Product Image
Only $30.97
CB M DIA D0738F
ASM CB M DIA D0738F
7-1/4" X 5/8" X 38T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0738F

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 7-1/4" X 5/8" X 38T
  • Ideal For: Angle Iron*, Flat Bar*, Channel*, All-thread**, Pipe
  • Mild Steel only
  • 1/8"- 3/8" max. wall thickness, 1"-1-1/2" max diameter 1/4" max. wall thickness
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts. 
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • Diablo's blade is designed to fit 7-1/4-Inch Circular Saws. 7-1/4-Inch diameter x 38t, 5/8-Inch arbor, 56+ RPM, 1/8 to 3/8-Inch max cut thickness, mild steel.
Product Details
photo below
Blade Diameter 7.25 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 0.625 in
Kerf 0.102 in
Max RPM 5800
Number of Teeth 38
Tooth Type TCG
Product Image
Only $29.97
CB M DIA D0738FM
ASM CB M DIA D0738FM
7" X 20MM X 38T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0738FM

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 7" X 20MM X 38T
  • Ideal For: Angle Iron*, Flat Bar*, Channel*, All-thread**, Pipe***
  • Mild Steel only - 1/8"-3/8" max. wall thickness, 1"-1-1/2" max diameter 1/4" max. wall thickness
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
  • With up to 40X the life of standard abrasive disc
  • Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • Diablo's blade is designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws. 
  • 7-Inch/18mm diameter x 38t, 2mm arbor, 39+ RPM, 1/8" to 3/8" max cutting thickness, general purpose steel.
Product Details
photo below
Blade Diameter 7 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 20 mm
Kerf 0.102 in
Max RPM 5800
Number of Teeth 38
Tooth Type TCG
Product Image
Only $29.97

- QSAW CUTS SAFELY: no excessive dust, fumes, or smoke make for a safer work space. Qsaw blades produce fewer sparks and will run cooler. We put the all the heat in the chip! This will give you an overall safer alternative in your cutting operation.

We stock Diablo, Evolution and Q-Saw blades to fit a wide range of saws. Whether you need to cut Metal, Wood, Plastics or other specialty materials, we have the right blades for your cutting needs. From 4 in. to 15 in., thin kerf and normal kerf, High Speed and Low Speed blades, take a look at our wide selection of blades.