Freud and Diablo Products

Freud Panel Blade #LU3A0203

• 10" X 5/8" 80T HI ATB
• Application: To size bi-laminated panels, with perfect finish on both sides without use of the scoring saw blade.
• Machines: Vertical saws, panel-sizing machines, portable machines.
• Features: HI ATB 38° tooth, 2deg Hook,100% Laser Cut, Silver I.C.E Coated
• Material: Double-sided panels with extremely fine coatings, veneered panels.

Ultimate Plywood & Melamine Blade #LU80R010

• 10" X 5/8" X 80T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max)
• The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.

Thin Kerf Fine Finish Crosscut Blade #LU88R010

• 10" X 5/8" X 60T ATB
• Ideal For: Crosscutting Blades For Fine Finish With Underpowered Saws.
• Depth of cut (1/2" min to 2-3/4" max).
• This blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. 
• Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Thin Kerf General Purpose Blade #LU86R012

• 12" X 1" X 48T ATB
• Ideal For: For Heavy-Duty General Purpose Applications.
• Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• For crosscutting thick hardwoods as well as softwoods and thinner stock materials.
• Ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. 
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

Thin Kerf Combination Blade #LU83R010

• 10" X 5/8" X 50T COMBINATION
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• Features laser cut anti-vibration slots; Provides less amp draw and reduces material waste. Includes Large Gullet Chip clearance and no need for stabilizers. 
• This Incredible Combination Blade brings together the best of both worlds with one flat tooth for ripping as well as four alternate top bevel teeth for crosscutting.

Ultimate Cut-Off Blade #LU85R008

• 8" X 5/8" X 64T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. 
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts.
• New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Cabinetmaker’s Crosscut Blade #LU73R010

• Heavy-Duty Crosscutting Blades Designed For The Industrial Cabinetmaker. Depth of cut 1/2" min to 2-3/4" max
• New 38 degree Hi-ATB for excellent crosscuts in double-sided veneer plywood and double-sided melamine
• Premium crosscutting blend of TiCo Hi-Density Carbide for maximum performance
• Perma-shield Non-Stick coating for less heat; gumming and corrosion
• Precision tensioning with computer controlled equipment for the blade to stay flat and true
• Positive hook angles for fast cutting and easy feed
• 10" Blade Diameter, 5/8" Arbor, 60 Teeth, Hi-ATBGrind, .126" Kerf (K), 10° Hook Angle, .087" Plate (P) blade

Thin Kerf General Purpose Blade #LU86R010

• 10" X 5/8" X 40T ATB
• Ideal For: For Heavy-Duty General Purpose Applications. 
• Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials.
• The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. 
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

Thin Kerf Next Gen Premier Fusion General Purpose #P410T

• 10" X 5/8" X 40T Hi-ATB
• Ideal For: Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate, veneered plywood, hardwoods & melamine.
• Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the most technologically advanced general purpose blade on the market! 
• Freud has designed these unique blades with a new radical tooth design called “Fusion Trio” which combines a special grind for the top, sides, and face of each tooth.
• This one-of-a-kind tooth geometry includes a 30 degree Hi-ATB, a double grind design, and an Axial Shear Face Grind to produce the ultimate polished finish in ripping and crosscutting applications with minimal resistance as it glides through in the material. 
• Whether you’re ripping or crosscutting, the next generation Premier Fusion blade is the best for flawless cuts in laminates, melamine, veneered plywoods, hardwoods, softwoods, and thick stock lumber.

Heavy-Duty Rip Blade #LM72M010

• 10" X 5/8" X 24T FLAT
• Ideal For: Smooth, Fast Heavy-Duty Ripping. Depth of cut (3/4" to 2-3/4").
• This blade gives smooth, fast rips in hardwoods and softwoods. 
• The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. 
• These blades are precision balanced and can be used in gang-rip operations. 
• The ideal working range is from 3/4" to 2-3/4" thick. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate ripping blade, there is no need for stabilizers.

Industrial Thin Kerf Glue Line Ripping Blade #LM75R010

• 10" X 5/8" X 30T TCG
• Ideal For: Thin Kerf Glue Line Ripping Blades For Superior Finish. Depth of cut (1/8" to 1").
• This thin kerf blade is specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. 
• There is no need for sanding or jointing after the cut. 
• The ideal working range is from 1/8" to 1" thick. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate ripping blade, there is no need for stabilizers.