Freud Panel Blade #LU3A0203

• 10" X 5/8" 80T HI ATB
• Application: To size bi-laminated panels, with perfect finish on both sides without use of the scoring saw blade.
• Machines: Vertical saws, panel-sizing machines, portable machines.
• Features: HI ATB 38° tooth, 2deg Hook,100% Laser Cut, Silver I.C.E Coated
• Material: Double-sided panels with extremely fine coatings, veneered panels.

Ultimate Plywood & Melamine Blade #LU80R010

• 10" X 5/8" X 80T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max)
• The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.

Description not displayed for Tradeshow Special items

Thin Kerf Fine Finish Crosscut Blade #LU88R010

• 10" X 5/8" X 60T ATB
• Ideal For: Crosscutting Blades For Fine Finish With Underpowered Saws.
• Depth of cut (1/2" min to 2-3/4" max).
• This blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. 
• Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Thin Kerf General Purpose Blade #LU86R012

• 12" X 1" X 48T ATB
• Ideal For: For Heavy-Duty General Purpose Applications.
• Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• For crosscutting thick hardwoods as well as softwoods and thinner stock materials.
• Ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. 
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

355mm Ferrous Metals Sawblade

355MM x 1" BORE x 72T DTCG CARBIDE TIPPED FOR FERROUS METAL BLADE, 2.6 KERF

For cutting ferrous metals, mild steel, copper and etc. WARNING: This blade is not suitable for cutting non-ferrous metals (aluminum), wood, glass and conglomerate.

Thick Non-Ferrous Metal Blade #LU89M010

• 10" X 5/8" X 72T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life.
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

Thin Kerf Combination Blade #LU83R010

• 10" X 5/8" X 50T COMBINATION
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• Features laser cut anti-vibration slots; Provides less amp draw and reduces material waste. Includes Large Gullet Chip clearance and no need for stabilizers. 
• This Incredible Combination Blade brings together the best of both worlds with one flat tooth for ripping as well as four alternate top bevel teeth for crosscutting.

Ultimate Cut-Off Blade #LU85R008

• 8" X 5/8" X 64T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. 
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts.
• New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Thick Non-Ferrous Metal Blade #LU89M012

• Freud Metal Cutting
• 12" X 1" X 86T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. 
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. 
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

Thin Stock Non-Ferrous Metal Blade #LU90M010

• Freud Metal Cutting
• Thin Stock Non-Ferrous Metal Blade
• 10" X 5/8" X 100T TCG
• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
• This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.
• A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. 
• The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. 
• Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. By combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut. These blades produce less heat keeping the cut edge crisp.

Cabinetmaker’s Crosscut Blade #LU73R010

• Heavy-Duty Crosscutting Blades Designed For The Industrial Cabinetmaker. Depth of cut 1/2" min to 2-3/4" max
• New 38 degree Hi-ATB for excellent crosscuts in double-sided veneer plywood and double-sided melamine
• Premium crosscutting blend of TiCo Hi-Density Carbide for maximum performance
• Perma-shield Non-Stick coating for less heat; gumming and corrosion
• Precision tensioning with computer controlled equipment for the blade to stay flat and true
• Positive hook angles for fast cutting and easy feed
• 10" Blade Diameter, 5/8" Arbor, 60 Teeth, Hi-ATBGrind, .126" Kerf (K), 10° Hook Angle, .087" Plate (P) blade