Circular Saw Blades

Steel Demon Metal Cutting Saw Blade #D0756F

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 7-1/4" X 5/8" X 56T
• Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness, 1" max diameter
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
• Diablo's blade is designed to fit 7-1/4-Inch Circular Saws. 7-1/4 -Inch diameter x 56t, 5/8 -Inch arbor, 56+ RPM, 1/8-Inch thin steel max cut thickness, mild steel.

Product Details
photo below
Blade Diameter	7.25 in
Blade Type	Metal Cutting Blades
Brand	Diablo
Material to Cut	Mild Steel
Arbor Diameter	0.625 in
Kerf	0.106 in
Max RPM	5800
Number of Teeth	56
Tooth Type	TCG

Steel Demon Metal Cutting Saw Blade #D0770F

• Diablo Metal Cutting
• 7-1/4" X 5/8" X 70T
• Ideal For: Roofing*, Siding*, Sheet*, Decking*, Corrugated Sheet*, Steel Studs Note: Use for mild steel only, 18 gauge or thinner
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts. 
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
• Diablo's blade is designed to fit 7-1/4-Inch Circular Saws. 
• 7-1/4-Inch diameter, 70T, 5/8-Inch arbor, 56+ RPM, 18 gauge or thinner steel max cut thickness, very thin steel.

Product Details
photo below
Blade Diameter	7.25 in
Blade Type	Metal Cutting Blades
Brand	Diablo
Material to Cut	Mild Steel
Arbor Diameter	0.625 in
Kerf	0.071 in
Max RPM	5800
Number of Teeth	70
Tooth Type	TCG

Steel Demon CERMET Carbide #D0842CF

• Diablo Metal Cutting
• 8" X 5/8 X 42T
• Diablo’s new Steel Demon 8 Inch 42 Tooth Cermet circular saw blades deliver 3x the life of a standard carbide-tipped blade in metal cutting applications. 
• This blade features new, exclusive innovation with a special Triple Chip grind and Perma-SHIELD coating to provide maximum cutting life in a wide variety of ferrous metals. 
• Ideal for 8 inch low RPM metal cutting saws.

Product Details
photo below
Blade Diameter	8 in
Blade Type	Metal Cutting Blades
Brand	Diablo
Material to Cut	Mild Steel
Arbor Diameter	0.625 in
Max RPM	9000
Number of Teeth	42
Tooth Type	TCG

CERMET Steel Demon #D1260CF

• Diablo Metal Cutting
• 12" X 1" X 60T
• This Blade uses CERMET teeth instead of Carbide. 
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.

Product Details
photo below
Blade Diameter	12 in
Blade Type	Metal Cutting Blades
Brand	Diablo
Material to Cut	Mild Steel
Arbor Diameter	1 in
Max RPM	1800
Number of Teeth	60
Tooth Type	TCG

Non-Ferrous Metals/Plastics Saw Blade

• Diablo Metal Cutting
• 12" X 1" X 96T
• Ideal For: Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood *Note: Only cut laminate flooring on a 12" slide miter or table saw
• Diablo's blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out.
• Laminated materials are highly abrasive, so these blades feature a TiCo^™ carbide blend ideally suited to harsh service. 
• Diablo's blade is ideal for 12 inch sliding miter saws and portable table saws. 12-inch diameter, 96t TCG, 1-inch arbor, 5 degree hook.

Product Details
photo below
Blade Diameter	12 in
Blade Type	Metal Cutting Blades
Brand	Diablo
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	1 in
Kerf	0.091 in
Max RPM	6000
Number of Teeth	96
Tooth Type	TCG

Steel Demon CERMET Carbide

• Diablo Metal Cutting
• 14" X 1 X 72T
• Diablo’s new Steel Demon Cermet circular saw blades deliver 3x the life of a standard carbide-tipped blade in metal cutting applications. 
• This blade features new, exclusive innovation with a special Triple Chip grind and Perma-SHIELD coating to provide maximum cutting life in a wide variety of ferrous metals.

Product Details
photo below
Blade Diameter	14 in
Blade Type	Metal Cutting Blades
Brand	Diablo
Material to Cut	Mild Steel
Arbor Diameter	1 in
Max RPM	1800
Number of Teeth	72
Tooth Type	TCG

Evolution Thin Steel #14BLADETS

• 14" X 1" X 90T
• Ideal for cutting metal under 1/8" in thickness. 
• Material applications include: sheet metal, metal roofing, and electrical conduit.
• Evolution Saw Blades are designed for accuracy and precision and to deliver maximum performance by using the highest grade carbide, hardened blade bodies and ultra high grade brazing techniques. 
• When cutting metals, Evolution Blades leave an instantly workable finish and produce virtually no heat, burrs or sparks.

Product Details
photo below
Blade Diameter	14 in
Blade Type	Metal Cutting Blades
Brand	Evolution
Material to Cut	Thin Steel
Arbor Diameter	1 in
Kerf	0.094 in
Max RPM	1600
Number of Teeth	90
Tooth Type	Carbide

Thick Non-Ferrous Metal Blade #LU89M010

• 10" X 5/8" X 72T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life.
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

Product Details
photo below
Blade Diameter	10 in
Blade Type	Metal Cutting Blades
Brand	Freud
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	0.625 in
Kerf	0.122 in
Max RPM	7000
Number of Teeth	72
Tooth Type	TCG

Thick Non-Ferrous Metal Blade #LU89M012

• Freud Metal Cutting
• 12" X 1" X 86T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. 
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. 
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

Product Details
photo below
Blade Diameter	12 in
Blade Type	Metal Cutting Blades
Brand	Freud
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	1 in
Kerf	0.122 in
Max RPM	6000
Number of Teeth	86
Tooth Type	TCG

Thin Stock Non-Ferrous Metal Blade #LU90M010

• Freud Metal Cutting
• Thin Stock Non-Ferrous Metal Blade
• 10" X 5/8" X 100T TCG
• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
• This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.
• A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. 
• The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. 
• Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

Product Details
photo below
Blade Diameter	10 in
Blade Type	Metal Cutting Blades
Brand	Freud
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	0.625 in
Kerf	0.11 in
Max RPM	8000
Number of Teeth	100
Tooth Type	TCG

Thin Stock Non-Ferrous Metal Blade #LU90M012

• Freud Metal Cutting
• 12" X 1" X 120T TCG
• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
• This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. 
• A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding.
• The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. 
• Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

Product Details
photo below
Blade Diameter	12 in
Blade Type	Metal Cutting Blades
Brand	Freud
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	1 in
Kerf	0.118 in
Max RPM	6000
Number of Teeth	120
Tooth Type	TCG

QSaw Blade for Aluminum #CCSA18460

• QSaw Industrial Quality Metal Cutting Carbide Circular Saw Blades are available for a variety of applications.
• Our Carbide blades will make all carbide saws into the ultimate dry cutting machine. 
• QSaw blades are capable of cutting mild steel, stainless steel, aluminum, wood, plastics and a variety of other material leaving a smooth, clean, cool to the touch finish.

This QSaw 7-1/4" x 5/8" x 60 Tooth blade is designed to cut Aluminum and has the following features:

• Laser cut bodies which have less distortion than stamped blades. Less distortion means truer rotating blade with less wobble producing straighter cuts.
• Superior Triple Chip ground teeth excels in a wide range of material such as steel aluminum wood and plastic.
• QSaw blades incorporate industrial brazing technology, which creates an extra durable bond between the teeth and body.
• Premium grade carbide teeth for long life.
• QSaw offers a wide range of blades for many different applications.

Product Details
photo below
Blade Diameter	7.25 in
Blade Type	Metal Cutting Blades
Brand	Qsaw
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	0.625 in
Kerf	0.078 in
Max RPM	5800
Number of Teeth	60
Tooth Type	Carbide

QSaw Blade for Aluminum #CCSA25480

• QSaw Industrial Quality Metal Cutting Carbide Circular Saw Blades are available for a variety of applications.
• Our Carbide blades will make all carbide saws into the ultimate dry cutting machine. 
• QSaw blades are capable of cutting mild steel, stainless steel, aluminum, wood, plastics and a variety of other material leaving a smooth, clean, cool to the touch finish.

This QSaw 10" x 5/8" x 80 Tooth blade is designed to cut Aluminum and has the following features:

• Laser cut bodies which have less distortion than stamped blades. Less distortion means truer rotating blade with less wobble producing straighter cuts.
• Superior Triple Chip ground teeth excels in a wide range of material such as steel aluminum wood and plastic.
• QSaw blades incorporate industrial brazing technology, which creates an extra durable bond between the teeth and body.
• Premium grade carbide teeth for long life.
• QSaw offers a wide range of blades for many different applications.

Product Details
photo below
Blade Diameter	10 in
Blade Type	Metal Cutting Blades
Brand	Qsaw
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	0.625 in
Kerf	0.094 in
Max RPM	4000
Number of Teeth	80
Tooth Type	Carbide

QSaw Blade for Aluminum #CCSA30580

• QSaw Industrial Quality Metal Cutting Carbide Circular Saw Blades are available for a variety of applications.
• Our Carbide blades will make all carbide saws into the ultimate dry cutting machine. 
• QSaw blades are capable of cutting mild steel, stainless steel, aluminum, wood, plastics and a variety of other material leaving a smooth, clean, cool to the touch finish.

This QSaw 12" x 1" x 80 Tooth blade is designed to cut Aluminum and has the following features:

• Laser cut bodies which have less distortion than stamped blades. Less distortion means truer rotating blade with less wobble producing straighter cuts.
• Superior Triple Chip ground teeth excels in a wide range of material such as steel aluminum wood and plastic.
• QSaw blades incorporate industrial brazing technology, which creates an extra durable bond between the teeth and body.
• Premium grade carbide teeth for long life.
• QSaw offers a wide range of blades for many different applications.

Product Details
photo below
Blade Diameter	12 in
Blade Type	Metal Cutting Blades
Brand	Qsaw
Material to Cut	Aluminum/Non Ferrous
Arbor Diameter	1 in
Kerf	0.102 in
Max RPM	4000
Number of Teeth	80
Tooth Type	Carbide

QSaw Blade for Mild Steel #CCSM13730

• QSaw Industrial Quality Metal Cutting Carbide Circular Saw Blades are available for a variety of applications.
• Our Carbide blades will make all carbide saws into the ultimate dry cutting machine. 
• QSaw blades are capable of cutting mild steel, stainless steel, aluminum, wood, plastics and a variety of other material leaving a smooth, clean, cool to the touch finish.

This QSaw 5-3/8" x 20MM x 30 Tooth blade is designed to cut Mild Steel and has the following features:

• Laser cut bodies which have less distortion than stamped blades. Less distortion means truer rotating blade with less wobble producing straighter cuts.
• Superior Triple Chip ground teeth excels in a wide range of material such as steel aluminum wood and plastic.
• QSaw blades incorporate industrial brazing technology, which creates an extra durable bond between the teeth and body.
• Premium grade carbide teeth for long life.
• QSaw offers a wide range of blades for many different applications.

Product Details
photo below
Blade Diameter	5.375 in
Blade Type	Metal Cutting Blades
Brand	Qsaw
Material to Cut	Mild Steel
Arbor Diameter	20 mm
Kerf	0.059 in
Max RPM	4200
Number of Teeth	30
Tooth Type	Carbide

QSaw for Mild Steel #CCSM17140

• QSaw Industrial Quality Metal Cutting Carbide Circular Saw Blades are available for a variety of applications.
• Our Carbide blades will make all carbide saws into the ultimate dry cutting machine. 
• QSaw blades are capable of cutting mild steel, stainless steel, aluminum, wood, plastics and a variety of other material leaving a smooth, clean, cool to the touch finish.

This QSaw 6-3/4" x 20MM x 40 Tooth blade is designed to cut Mild Steel and has the following features:

• Laser cut bodies which have less distortion than stamped blades. Less distortion means truer rotating blade with less wobble producing straighter cuts.
• Superior Triple Chip ground teeth excels in a wide range of material such as steel aluminum wood and plastic.
• QSaw blades incorporate industrial brazing technology, which creates an extra durable bond between the teeth and body.
• Premium grade carbide teeth for long life.
• QSaw offers a wide range of blades for many different applications.

Product Details
photo below
Blade Diameter	6.75 in
Blade Type	Metal Cutting Blades
Brand	Qsaw
Material to Cut	Mild Steel
Arbor Diameter	20 mm
Kerf	0.078 in
Max RPM	5800
Number of Teeth	40
Tooth Type	Carbide