Thick Non-Ferrous Metal Blade #LU89M010

• 10" X 5/8" X 72T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life.
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

 Non-Ferrous Metals & Laminate Saw Blade #D1084L

• 10" X 5/8" X 84T
• Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood
• Note: Only cut laminate flooring on a 10" slide miter or table saw
• Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. 
• Diablo's blade is ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate, etc.

Finish Saw Blade #D0740A

• Finish Saw Blade
• 7-1/4" X 5/8" X 40T
• Ideal For: High quality crosscuts and rip cuts in wood, plywood & melamine
• This Finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood. 
• A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.
• The perfect choice for excellent rips and crosscuts using a portable saw.
• They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. 

10 in. x 90 Tooth Ultimate Polished Finish Saw Blade

Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects.

12 in. x 100 Tooth Ultimate Polished Finish Saw Blade

Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects.

Thin Kerf Combination Blade #LU83R010

• 10" X 5/8" X 50T COMBINATION
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• Features laser cut anti-vibration slots; Provides less amp draw and reduces material waste. Includes Large Gullet Chip clearance and no need for stabilizers. 
• This Incredible Combination Blade brings together the best of both worlds with one flat tooth for ripping as well as four alternate top bevel teeth for crosscutting.

Ultimate Cut-Off Blade #LU85R008

• 8" X 5/8" X 64T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. 
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts.
• New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Thin Kerf General Purpose #P1060X

• Make clean cuts in hardwood, softwood, plywood and medium-density fiberboard (MDF) with the Avanti PRO 10 in. x 60-Tooth Fine Finish Saw Blade. 
• This was designed specifically for professional contractors. 
• This blade has a thin kerf edge and friction-reducing rim coating to resist binding and drag. 
• The durable carbide reinforcement extends the life of the blade.
• Great for professional contractors
• Ideal for hardwood, softwood, plywood and MDF
• Made of high-quality steel with carbide reinforcement for durability
• Thin kerf design for improved cutting performance
• Special rim coating for reduced binding and drag

10 in. x 60 Tooth Fine Finish Slide Miter Saw Blade

Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in “S” are also ideal for radial arm saws).

Steel Demon Metal Cutting Saw Blade #D0649F

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 6-3/4" X 20MM X 48T
• Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness, 1" max diameter 
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.

Thick Non-Ferrous Metal Blade #LU89M012

• Freud Metal Cutting
• 12" X 1" X 86T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. 
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. 
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

Thin Stock Non-Ferrous Metal Blade #LU90M010

• Freud Metal Cutting
• Thin Stock Non-Ferrous Metal Blade
• 10" X 5/8" X 100T TCG
• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
• This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.
• A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. 
• The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. 
• Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

Composite Material/Plastics TrexBlade #D1284CD

• Diablo Specialty Cutting
• Composite Material/Plastics TrexBlade
• 12" X 1" X 84T
• Ideal for high quality finish cuts in composite material and cellular PVC
• Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials.
• These new blades deliver maximum performance and highest quality of finish; making it a "must-have" tool for both professionals and DIYers planning composite decking projects. 
• Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD^® non-stick coating, and specific TiCo^™ Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.

This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. By combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut. These blades produce less heat keeping the cut edge crisp.