Freud and Diablo Products

• Freud Specialty Cutting
• Heavy Duty Multi-Purpose Blade
• 10" X 5/8" X 60T TCG
• Ideal For: Stacked Chipboard and Man-made Materials.
• Crosscuts (1/2" to 2-3/4") & Rips (3/4" to 3/8" ).
• This multi-purpose blade will cut stacks of man-made wood products as well as hardwood and softwood up to 2-3/4" thick. 
• The blade’s deep gullets and TCG rip and crosscut through hardwoods and softwoods with ease.
• Although the ideal working range is 1/2" to 2-3/4" thick, thinner or thicker materials may be cut, resulting in some loss of surface finish.

Solid Surface Blade #LU95R010

• 10" X 5/8" X 72T TCG
• Ideal For: Solid surface materials such as DuPont^® Corian^®, Wilsonart Gibralter^® and SSV Fountainhead^®. Depth of cut (1/4" to 1-5/8").
• With this ultimate solid surface blade, there is no need for stabilizers. 
• This blade features teeth with a specially designed triple chip grind for leaving swirl-free cuts in solid surface materials such as DuPont^® Corian^®, Wilsonart Gibralter^® and SSV Fountainhead^®. 
• The laser-cut anti-vibration slots reduce the sideways movement of the cutting edge against the solid surface material, dramatically extending cutting life. 
• With this ultimate solid surface blade, there is no need for stabilizers.

Double Sided Laminate/Melamine Blade #LU97R010

• 10" X 5/8" X 80T TCG
• Ideal For: Excellent finish on the top and bottom of laminates, melamine & veneered plywood. Depth of cut (1/4" min to 1-5/8" max).
• Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. 
• The laser-cut anti-vibration design yields the plate acoustically dead. 
• This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. 
• This dramatically extends cutting life and finish. No scoring blades needed with this blade!

Superior 7-Inch 56 Tooth TCG Laminate Cutting Saw #LU98R007

• Freud LU98R007 Superior 7-Inch 56 Tooth TCG laminate and wood cutting saw blade with 5/8" arbor and PermaShield coating
• Laser cut blade bodies and expansion slots
• Kickback reducing design
• Perma-SHIELD coating
• Covered by Freud's limited lifetime warranty

Single Sided Laminate/Melamine Blade #LU98R010

• 10" X 5/8" X 80T TCG
• Ideal For: Single-Sided Laminates, Chip Board And Other Man-made Materials. Depth of cut (1/2" min to 2-3/4" max).
• This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines.
• The Perma-SHIELD^™ coating makes these blades resistant to friction and heat build-up.
• Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power.
• The 10° hook angle and a triple chip grind provide fast cuts and long cutting life.

Box Joint Cutter Set #SBOX8

• 8" Box Joint Set
• Ideal For: Making box joint construction easy
• To create a perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade.
• Set includes 2 blades, instructions for making box joints and building a box joint jig.

Dial-A-Width Stacked Dado Sets #SD608

• 8" Dial-A-Width Dado
• Ideal For: Cuts clean flat bottom grooves in materials such as veneered plywoods and laminates to solid wood.
• To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
• Set includes 2 outside blades, 5 chippers, wrench and carrying case.
• Adjusts in .004" increments.

Heavy-Duty Rip Blade #LM72M010

• 10" X 5/8" X 24T FLAT
• Ideal For: Smooth, Fast Heavy-Duty Ripping. Depth of cut (3/4" to 2-3/4").
• This blade gives smooth, fast rips in hardwoods and softwoods. 
• The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. 
• These blades are precision balanced and can be used in gang-rip operations. 
• The ideal working range is from 3/4" to 2-3/4" thick. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate ripping blade, there is no need for stabilizers.

Industrial Thin Kerf Glue Line Ripping Blade #LM75R010

• 10" X 5/8" X 30T TCG
• Ideal For: Thin Kerf Glue Line Ripping Blades For Superior Finish. Depth of cut (1/8" to 1").
• This thin kerf blade is specially designed triple chip tooth design produces extremely smooth, true surfaces for gluing and finish work. 
• There is no need for sanding or jointing after the cut. 
• The ideal working range is from 1/8" to 1" thick. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate ripping blade, there is no need for stabilizers.

High-Production General-Purpose Saw Blade #LU71M016

• Ideal for quick crosscutting of materials 1-1/2 to 3-1/2 inches thick, and ripping materials 1/4 to 1-1/4 inches thick
• Heavy-duty plate with laser-cut, anti-vibration slots
• Freud's unique Silver I.C.E. coating delivers corrosion resistance and reduced heat buildup while guarding against gummy pitch buildup
• Ideal for Fast, Thick Stock Cutting Crosscuts 1-1/2" to 3-1/2" & Rips 1/4" to 1-1/4"
• Application for Wood, Laminate, Chip Board, Plywood, Hardwood, Softwood and thinner stock materials
• 16" Blade Diameter, 1" Arbor, 48 ATB Teeth, ATB Grind, .177" Kerf (K), 15° Hook Angle, .118" Plate (P) 

Thin Kerf Ultimate Cut-Off Blade #LU74R010

• 10" X 5/8" X 80T ATB
• Ideal For: Ultimate Cut-Off Blades For Glass-Smooth Finishes With Underpowered Saws. 
• Depth of cut (1/4" min to 1-5/8" max).
• This thin kerf blade produces glass smooth surfaces when crosscutting hardwoods and softwoods, thanks to Freud’s unique side grinding technology. 
• The larger blades are ideal for miter box applications. 
• Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Thin Kerf Ultimate Cut-Off Blade #LU74R012

• 12" X 1" X 96T ATB
• Ideal For: Ultimate Cut-Off Blades For Smooth Finishes With Underpowered Saws.
• Depth of cut (1/4" min to 1-5/8" max).
• Producing frictionless smooth surfaces when crosscutting hardwoods and softwoods.The thin kerf design improves the overall efficiency; removing less material than standard carbide blades and requiring less horsepower.
• The larger blades are ideal for miter box applications. 

Thin Kerf Ultimate Plywood & Melamine Blade #LU79R006M20

• 160MM X 20MM X 48T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminates For Virtually Chip-Free Cuts. 
• Depth of cut (1/4" min to 1-5/8" max).
• The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.
• Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. 
• This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. 
• The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. 
• The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!

Thin Kerf Ultimate Plywood & Melamine Blade #LU79R010

• 10" X 5/8" X 80T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminates For Virtually Chip-Free Cuts.
• Depth of cut (1/4" min to 1-5/8" max).
• The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. 
• Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. 
• This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.
• The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. 
• The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!