Freud and Diablo Products

Thin Kerf Ultimate Plywood & Melamine Blade #LU79R007

• 7.25" X 5/8" X 60T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminates For Virtually Chip-Free Cuts. 
• Depth of cut (1/4" min to 1-5/8" max).
• The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. 
• Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. 
• This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. 
• The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. 
• The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!

Thin Kerf Ultimate Plywood & Melamine Blade #LU79R010

• 10" X 5/8" X 80T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminates For Virtually Chip-Free Cuts.
• Depth of cut (1/4" min to 1-5/8" max).
• The LU79 thin kerf line of saw blades provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods. 
• Using advanced technology, Freud developed the LU79 thin kerf line of saw blades that features laser-cut, anti-vibration slots that practically eliminate the vibrations that resonate in standard blades. 
• This blade provides flawless, chip-free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.
• The combination of Hi-ATB tooth design and anti-vibration slots makes these thin kerf blades the ultimate finish blades. 
• The result is a cut so smooth it eliminates the need for a stabilizer or a scoring blade!

Ultimate Plywood & Melamine Blade #LU80R010

• 10" X 5/8" X 80T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max)
• The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.

Ultimate Plywood & Melamine Blade #LU80R012

• 12" X 1" X 96T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max).
• The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.

Thin Kerf Combination Blade #LU83R010

• 10" X 5/8" X 50T COMBINATION
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• Features laser cut anti-vibration slots; Provides less amp draw and reduces material waste. Includes Large Gullet Chip clearance and no need for stabilizers. 
• This Incredible Combination Blade brings together the best of both worlds with one flat tooth for ripping as well as four alternate top bevel teeth for crosscutting.

Combination Blade #LU84M011

• 10" X 5/8" X 50T COMB
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate combination blade, there is no need for stabilizers.

Combination Blade #LU84R011

• 10" X 5/8" X 50T COMB
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate combination blade, there is no need for stabilizers.

Combination Blade #LU84R012

• 12" X 1" X 60T COMB
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate combination blade, there is no need for stabilizers.

Ultimate Cut-Off Blade #LU85R010

• 10" X 5/8" X 80T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required.
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Ultimate Cut-Off Blade #LU85R012

• 12" X 1" X 96T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. 
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. 
• New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Thin Kerf General Purpose Blade #LU86R006M20

• 160MM X 20MM X 28T ATB
• Ideal For: For Heavy-Duty General Purpose Applications. Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. 
• The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping.
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

Thin Kerf General Purpose Blade #LU86R010

• 10" X 5/8" X 40T ATB
• Ideal For: For Heavy-Duty General Purpose Applications. 
• Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials.
• The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. 
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

Thin Kerf General Purpose Blade #LU86R012

• 12" X 1" X 48T ATB
• Ideal For: For Heavy-Duty General Purpose Applications.
• Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• For crosscutting thick hardwoods as well as softwoods and thinner stock materials.
• Ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. 
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

Thin Kerf Rip Blade #LU87R006M20

• 160MM X 20MM X 14T ATB
• Ideal For: Heavy-Duty Ripping Blades For Underpowered Saws. 
• Depth of cut (3/4" to 2-3/4").
• This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. 
• The Perma-SHIELD^™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. 
• The ideal working range is from 3/4" to 2-3/4" thick.

Thin Kerf Rip Blade #LU87R008

• 8" X 5/8" X 22T ATB
• Ideal For: Heavy-Duty Ripping Blades For Underpowered Saws. 
• Depth of cut (3/4" to 2-3/4").
• This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. 
• The Perma-SHIELD^™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. 
• The ideal working range is from 3/4" to 2-3/4" thick.

Thin Kerf Rip Blade #LU87R010

• 10" X 5/8" X 24T ATB
• Ideal For: Heavy-Duty Ripping Blades For Underpowered Saws. 
• Depth of cut (3/4" to 2-3/4").
• This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower.
• The Perma-SHIELD^™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. 
• The ideal working range is from 3/4" to 2-3/4" thick.

Thin Kerf Fine Finish Crosscut Blade #LU88R010

• 10" X 5/8" X 60T ATB
• Ideal For: Crosscutting Blades For Fine Finish With Underpowered Saws.
• Depth of cut (1/2" min to 2-3/4" max).
• This blade gives new life to underpowered saws and produces smooth crosscuts in hardwoods, softwoods and moldings. Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power. 
• Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Thin Kerf Sliding Compound Miter Saw Blade #LU91R008

• 8.5" X 5/8" X 48T ATB
• Ideal For: Fine Finish Blades For Sliding Miter & Radial Arm Saws.
• Depth of cut (1/2" min to 2-3/4" max).
• This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. 
• The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. 
• Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.