Freud and Diablo Products

Ultimate Plywood & Melamine Blade #LU80R012

• 12" X 1" X 96T Hi-ATB
• Ideal For: Flawless Finish In Veneered Plywood, Chip Board, Melamine & Laminate - Depth of cut (1/4" min to 1-5/8" max).
• The LU80 saw blade provides flawless, chip free edges in veneered plywoods, fine moldings, melamine, laminates, and crosscuts in solid woods.

Combination Blade #LU84R012

• 12" X 1" X 60T COMB
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate combination blade, there is no need for stabilizers.

Ultimate Cut-Off Blade #LU85R010

• 10" X 5/8" X 80T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required.
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Thin Kerf General Purpose Blade #LU86R006M20

• 160MM X 20MM X 28T ATB
• Ideal For: For Heavy-Duty General Purpose Applications. Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials. 
• The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping.
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

Thin Kerf Rip Blade #LU87R006M20

• 160MM X 20MM X 14T ATB
• Ideal For: Heavy-Duty Ripping Blades For Underpowered Saws. 
• Depth of cut (3/4" to 2-3/4").
• This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. 
• The Perma-SHIELD^™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. 
• The ideal working range is from 3/4" to 2-3/4" thick.

Thin Kerf Rip Blade #LU87R008

• 8" X 5/8" X 22T ATB
• Ideal For: Heavy-Duty Ripping Blades For Underpowered Saws. 
• Depth of cut (3/4" to 2-3/4").
• This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower. 
• The Perma-SHIELD^™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. 
• The ideal working range is from 3/4" to 2-3/4" thick.

Thin Kerf Sliding Compound Miter Saw Blade #LU91R008

• 8.5" X 5/8" X 48T ATB
• Ideal For: Fine Finish Blades For Sliding Miter & Radial Arm Saws.
• Depth of cut (1/2" min to 2-3/4" max).
• This thin kerf industrial blade provides a superior finish cut with sliding compound miter saws. 
• The 5° negative hook angle helps prevent the blade from being too aggressive and pushes the work piece down and towards the fence. 
• Thin kerf blades remove less material than standard carbide blades, thus requiring less horsepower to produce equally good results.

Next Gen Premier Fusion General Purpose #P410

• 10" X 5/8" X 40T Hi-ATB
• Ideal For: Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate, veneered plywood, hardwoods & melamine.
• Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the most technologically advanced general purpose blade on the market! 
• Freud has designed these unique blades with a new radical tooth design called “Fusion Trio” which combines a special grind for the top, sides, and face of each tooth. 
• This one-of-a-kind tooth geometry includes a 30 degree Hi-ATB, a double grind design and an Axial Shear Face Grind to produce the ultimate polished finish in ripping and crosscutting applications with minimal resistance as it glides through in the material. 
• Whether you’re ripping or crosscutting, the next generation Premier Fusion blade is the best for flawless cuts in laminates, melamine, veneered plywoods, hardwoods, softwoods, and thick stock lumber.

Freud Wood Cutting Next Gen Premier Fusion General #P412-5/8

• 12" X 5/8" X 48T Hi-ATB - Special 5/8" Bore
• Ideal For: Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate, veneered plywood, hardwoods & melamine.
• Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the most technologically advanced general purpose blade on the market!
• Freud has designed these unique blades with a new radical tooth design called “Fusion Trio” which combines a special grind for the top, sides, and face of each tooth. 
• This one-of-a-kind tooth geometry includes a 30 degree Hi-ATB, a double grind design, and an Axial Shear Face Grind to produce the ultimate polished finish in ripping and crosscutting applications with minimal resistance as it glides through in the material.
• Whether you’re ripping or crosscutting, the next generation Premier Fusion blade is the best for flawless cuts in laminates, melamine, veneered plywoods, hardwoods, softwoods, and thick stock lumber.