Item added to cart
Sawblade.com Logo 800.754.6920
Free Ground Shipping on Orders over $150 (except bandsaws)

Circular Saw Blades

Application

  • When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
  • Metal Cutting Carbide Machines & Blades replace abrasive cut off saws and last 20x Longer
  • QSaw, Freud, and Diablo have blades for specific wood cutting, laminate, and speciality materials

Features

  • Qsaw Industrial Circular Saw Blades are designed to deliver the highest performance in the industry. 
  • We use the highest grade carbide, precision laser cut blade bodies & state of the art industrial brazing.
  • This makes for a premium blade designed for industrial use and to increase productivity.

Benefits

  • Qsaw Cuts Cooler,  When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
  • Qsaw Cuts Faster,  Qsaw blades simply cut faster than other carbide or abrasive blades
  • Qsaw Lasts Longer,  other carbide and Abrasive blades wear down quickly. The Qsaw Carbide Circular Saw Blade can last as long as 20x or more than other products.
  • Qsaw Cuts Accurately, other blades can to flex and "walk" during a cut. Qsaw uses a laser cut blade body that is designed for accuracy and precision.
        Clear Filters
CB S FRE LU94M010
ASM CB S FRE LU94M010
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Plastic Blade

Freud Blade for Plastic #LU94M010

  • 10" X 5/8" X 80T TCG
  • Ideal For: Plexiglass and Plastics. Depth of cut (1/4" to 1-5/8").
  • This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. 
  • By combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut. 
  • These blades produce less heat keeping the cut edge crisp.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Plastics
Arbor Diameter 0.625 in
Kerf 0.11 in
Max RPM 7000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $87.97
CB S FRE LU95R010
ASM CB S FRE LU95R010
10" X 5/8" X 72T TCG
Freud Specialty Cutting
Solid Surface Blade

Solid Surface Blade #LU95R010

  • 10" X 5/8" X 72T TCG
  • Ideal For: Solid surface materials such as DuPont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®. Depth of cut (1/4" to 1-5/8").
  • With this ultimate solid surface blade, there is no need for stabilizers. 
  • This blade features teeth with a specially designed triple chip grind for leaving swirl-free cuts in solid surface materials such as DuPont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®. 
  • The laser-cut anti-vibration slots reduce the sideways movement of the cutting edge against the solid surface material, dramatically extending cutting life. 
  • With this ultimate solid surface blade, there is no need for stabilizers.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Plastics
Arbor Diameter 0.625 in
Kerf 0.126 in
Max RPM 7000
Number of Teeth 72
Tooth Type TCG
Product Image
Only $175.60
CB S FRE LU96R010
ASM CB S FRE LU96R010
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Thin Kerf Double Sided Laminate/Melamine

Thin Kerf Double Sided Laminate/Melamine #LU96R010

  • 10" X 5/8" X 80T TCG
  • Ideal For: Double-sided laminates, melamine & veneered plywood. Depth of cut (1/4" min to 1-5/8" max).
  • The LU96R is a thin kerf blade that is designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood.
  • The laser-cut anti-vibration design yields the plate acoustically dead. 
  • This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. This dramatically extends cutting life and finish. No scoring blades needed with this blade!
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Arbor Diameter 0.625 in
Kerf 0.091 in
Max RPM 8000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $114.25
CB S FRE LU96R012
CB S FRE LU96R012
12" X 1" X 96 TCG
Freud Wood Cutting Blade
Thin Kerf Double Sided Laminate Cutting Saw Blade

Thin Kerf Double Sided Laminate Cutting Saw Blade #LU96R012

  • Ideal for double-sided laminates, melamine, and veneered plywood and Other Manmade Materials from 1/4 to 1-5/8 inches thick
  • Heavy-duty plate with laser-cut, anti-vibration slots
  • Tough Perma-SHIELD coating reduces friction and heat buildup
  • Thin Kerf requires less power and allows for faster feed rate
  • No scoring blades needed with this 12" Blade Diameter, 1" Arbor, 96 TCG Teeth, TCG Grind, .091" Kerf (K), -3° Hook Angle, .071" Plate (P) blade
Product Details
photo below
Blade Diameter 12 in
Blade Type Laminate
Brand Freud
Material to Cut Multiple Purpose
Arbor Diameter 1 in
Kerf 0.091 in
Max RPM 6000
Number of Teeth 96
Tooth Type TCG
Product Image
Only $147.75
CB S FRE LU97R010
ASM CB S FRE LU97R010
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Double Sided Laminate/Melamine Blade

Double Sided Laminate/Melamine Blade #LU97R010

  • 10" X 5/8" X 80T TCG
  • Ideal For: Excellent finish on the top and bottom of laminates, melamine & veneered plywood. Depth of cut (1/4" min to 1-5/8" max).
  • Designed to give long life and excellent finish on the top and bottom of laminates, melamine & veneered plywood. 
  • The laser-cut anti-vibration design yields the plate acoustically dead. 
  • This reduces the sideways movement of the cutting edge to prevent chipping in manmade materials such as laminates. 
  • This dramatically extends cutting life and finish. No scoring blades needed with this blade!
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Arbor Diameter 0.625 in
Kerf 0.126 in
Max RPM 7000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $104.47
CB S FRE LU98R007
ASM CB M FRE LU98R007
7" x ⅝" x 56 Tooth
Freud Laminate Cutting Blade
Superior 7-Inch 56 Tooth TCG Laminate Cutting Saw

Superior 7-Inch 56 Tooth TCG Laminate Cutting Saw #LU98R007

  • Freud LU98R007 Superior 7-Inch 56 Tooth TCG laminate and wood cutting saw blade with 5/8" arbor and PermaShield coating
  • Laser cut blade bodies and expansion slots
  • Kickback reducing design
  • Perma-SHIELD coating
  • Covered by Freud's limited lifetime warranty
Product Details
photo below
Blade Diameter 7 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Product Image
Only $122.50
CB S FRE LU98R010
ASM CB S FRE LU98R010
10" X 5/8" X 80T TCG
Freud Specialty Cutting
Single Sided Laminate/Melamine Blade

Single Sided Laminate/Melamine Blade #LU98R010

  • 10" X 5/8" X 80T TCG
  • Ideal For: Single-Sided Laminates, Chip Board And Other Man-made Materials. Depth of cut (1/2" min to 2-3/4" max).
  • This fast-cutting blade is ideal for a perfect finish on one side of laminates and melamines.
  • The Perma-SHIELD™ coating makes these blades resistant to friction and heat build-up.
  • Coated blades pull 1/3 less on the saw, which translates into 33% more cutting power.
  • The 10° hook angle and a triple chip grind provide fast cuts and long cutting life.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Laminate
Arbor Diameter 0.625 in
Kerf 0.126 in
Max RPM 8000
Number of Teeth 80
Tooth Type TCG
Product Image
Only $153.15
CB S FRE SBOX8
ASM CB S FRE SBOX8
8" Box Joint Set
Freud Box Joint Set
Box Joint Cutter Set

Box Joint Cutter Set #SBOX8

  • 8" Box Joint Set
  • Ideal For: Making box joint construction easy
  • To create a perfectly square, flat-bottom box joints, on a table saw without using a dado set or saw blade.
  • Set includes 2 blades, instructions for making box joints and building a box joint jig.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Arbor Diameter 0.625 in
Max RPM 6000
Number of Teeth 20
Tooth Type Carbide
Product Image
Only $94.97
CB S FRE SD208S
ASM CB S FRE SD208S
8" Stack Dado
Freud Dado Set
Professional Dado Set

Professional Dado Set #SD208S

  • 8" Stack Dado
  • Ideal For: Ideal for under-powered saws
  • Creates clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
  • Set includes 2 blades, 3 chippers, spacers, shim set and carrying case.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Max RPM 6000
Number of Teeth 12
Product Image
Only $99.97
CB S FRE SD508
ASM CB S FRE SD508
8" Super Dado
Freud Dado Set
Super Dado Sets

Super Dado Sets #SD508

  • 8" Super Dado
  • Ideal For: For cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
  • To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
  • Set includes 2 blades, 6 chippers, shim set and carrying case.
  • Adjusts in 1/32" increments.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Arbor Diameter 0.625 in
Max RPM 6000
Number of Teeth 24
Tooth Type Carbide
Product Image
Only $199.97
CB S FRE SD508OLH
ASM CB S FRE SD508OLH
8" X 5/8" Bore
Dado Outside Blade Left Hand

Dado Outside Blade Left Hand #SD508OLH

  • 8" X 5/8" Bore
  • Replacement Left Hand Outside Blade for SD508 Series Dado
  • Freud dado sets are built to last through many years of sharpening and use. However, accidents like dropping a chipper do happen and Freud offers a full range of replacement parts.
  • All outside blades and chippers are made to the same exacting standards or quality as the original set.
  • For wider cuts Freud's Precision Shim Set and additional chippers are available.
  • Application: Use on all table saws and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Product Image
Only $97.85
CB S FRE SD508ORH
ASM CB S FRE SD508ORH
8" X 5/8" Bore
Dado Outside Blade Right Hand

Dado Outside Blade Right Hand #SD508ORH

  • 8" X 5/8" Bore
  • Right Hand Outside Blade for SD508 Series Dado
  • Freud dado sets are built to last through many years of sharpening and use. However, accidents like dropping a chipper do happen and Freud offers a full range of replacement parts.
  • All outside blades and chippers are made to the same exacting standards or quality as the original set.
  • For wider cuts Freud's Precision Shim Set and additional chippers are available.
  • Application: Use on all table saws and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood, or hardwood.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Product Image
Only $97.85
CB S FRE SD510
ASM CB S FRE SD510
Freud SD510 Super Dado Set
Freud Dado Set
Super Dado Sets

Super Dado Sets #SD510

  • The Freud SD510 SD500 Series of dado sets cuts everything from veneered plywoods and laminates to solid wood, chip and splinter-free with a super smooth, flat bottom.
  • The SD500 Series dado sets were the first to include a 3/32" thick chipper and has the flexibility of an adjustable dado to handle today’s undersized plywood. 
  • This allows the cut width to be adjusted in 1/32" increments and doubles the number of slot widths available. 
  • A shim set is also included with the dado set for fine adjustments. 
  • Use on all table saws, and radial arm saws for cutting slots, grooves, dadoes, and rabbets in softwood or hardwood.
Product Details
photo below
Blade Diameter 10 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Product Image
Only $299.97
CB S FRE SD608
ASM CB S FRE SD608
8" Dial-A-Width Dado
Freud Stacked Dado Set
Dial-A-Width Stacked Dado Sets

Dial-A-Width Stacked Dado Sets #SD608

  • 8" Dial-A-Width Dado
  • Ideal For: Cuts clean flat bottom grooves in materials such as veneered plywoods and laminates to solid wood.
  • To create clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
  • Set includes 2 outside blades, 5 chippers, wrench and carrying case.
  • Adjusts in .004" increments.
Product Details
photo below
Blade Diameter 8 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Dado
Arbor Diameter 0.625 in
Max RPM 6000
Number of Teeth 24
Tooth Type Carbide
Product Image
Only $274.97
CB VC QSAW VC1028
ASM CB VC QSAW VC1028
10" x 1" x 28T Versa Blade
QSaw Versa Blade
Multi Purpose Blade

Multi Purpose Blade #VC1028

  • 10" x 1" x 28T Versa Blade
  • The Versa Cut Blades is a 10-Inch Tungsten Carbide Tipped Multipurpose Blade. 
  • This blade is capable of cutting through steel, aluminum, wood with nails in, and plastic. 
  • Meant for use with the Trajan DM250 and Evolution RAGE Machines
Product Details
photo below
Blade Diameter 10 in
Blade Type Versa Cut
Brand Qsaw
Material to Cut Versa-Cut
Arbor Diameter 1 in
Kerf 0.078 in
Max RPM 2750
Number of Teeth 28
Tooth Type Carbide
Product Image
Only $37.63
CB VC QSAW VC1052
ASM CB VC QSAW VC1052
10" x 1" x 52T Versa Blade
Versa Saw Blade
Multi Purpose Blade

Multi Purpose Blade #VC1052

  • 10" x 1" x 52T Versa Blade
  • The Versa Cut Blade is a 10 Inch Tungsten Carbide Tipped Multipurpose Blade. 
  • This blade is capable of cutting through steel, aluminum, wood with nails in, and plastic.
  • For use with the Trajan DM 250 and Evolution RAGE Machines
Product Details
photo below
Blade Diameter 10 in
Blade Type Versa Cut
Brand Qsaw
Material to Cut Versa-Cut
Arbor Diameter 1 in
Kerf 0.078 in
Max RPM 2750
Number of Teeth 52
Tooth Type Carbide
Product Image
Only $54.53
CB W DIA D0436X
ASM CB W DIA D0436X
4-3/8" X 20MM X 36T
Diablo Wood Cutting
Trim Saw Blade

Trim Saw Blade #D0436X

  • Trim Saw Blade
  • 4-3/8" X 20MM X 36T
  • Ideal For: Smooth finish crosscuts in hardwood, softwood, or plywood
  • Diablo's 4-3/8" 36 tooth
  • Cordless Trim saw blade includes a 20mm arbor with 3/8" bushing. 
  • Diablo's finish blades are the perfect choice for excellent rips and crosscuts using a portable saw while the super thin kerf helps extend the battery life on the saw.
Product Details
photo below
Blade Diameter 4.375 in
Blade Type Wood Cutting Blades
Brand Diablo
Material to Cut Composite
Arbor Diameter 20 mm
Kerf 0.049 in
Max RPM 14000
Number of Teeth 36
Tooth Type ATB
Product Image
Only $14.97
CB W DIA D0516X
ASM CB W DIA D0516X
5-3/8" X 10MM X 16T
Diablo Wood Cutting
Trim Saw Blade

Trim Saw Blade #D0516X

  • Trim Saw Blade
  • 5-3/8" X 10MM X 16T
  • Ideal For: General construction applications, including fast, efficient ripping and crosscutting
  • Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. 
  • Diablo's trim saw blade is proven to extend run time on all trim saws.
Product Details
photo below
Blade Diameter 5.375 in
Blade Type Wood Cutting Blades
Brand Diablo
Material to Cut Framing
Arbor Diameter 10 mm
Kerf 0.049 in
Max RPM 12000
Number of Teeth 16
Tooth Type ATB
Product Image
Only $12.97
CB W DIA D0518X
ASM CB W DIA D0518X
5-1/2" X 10MM X 18T
Diablo Wood Cutting
Fast Framing Trim Saw Blade

Fast Framing Trim Saw Blade #D0518X

  • Fast Framing Trim Saw Blade
  • 5-1/2" X 10MM X 18T
  • Ideal For: Framing and paneling
  • Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. 
  • Diablo's trim saw blade is proven to extend run time on Dewalt and similar trim saws.
Product Details
photo below
Blade Diameter 5.5 in
Blade Type Wood Cutting Blades
Brand Diablo
Material to Cut Framing
Arbor Diameter 10 mm
Kerf 0.049 in
Max RPM 12000
Number of Teeth 18
Tooth Type ATB
Product Image
Only $13.97
CB W DIA D0524X
ASM CB W DIA D0524X
5-3/8" X 10MM X 24T
Diablo Wood Cutting
Framing Trim Saw Blade

Framing Trim Saw Blade #D0524X

  • Framing Trim Saw Blade
  • 5-3/8" X 10MM X 24T
  • Ideal For: General construction applications, including fast, efficient ripping and crosscutting
  • Diablo Cordless Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. 
  • Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. 
  • The thin kerf design requires less cutting power from the user and the saw for better control over the cut. 
  • Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades.
Product Details
photo below
Blade Diameter 5.375 in
Blade Type Wood Cutting Blades
Brand Diablo
Material to Cut Framing
Arbor Diameter 10 mm
Kerf 0.049 in
Max RPM 12000
Number of Teeth 24
Tooth Type ATB
Product Image
Only $14.97

- QSAW CUTS SAFELY: no excessive dust, fumes, or smoke make for a safer work space. Qsaw blades produce fewer sparks and will run cooler. We put the all the heat in the chip! This will give you an overall safer alternative in your cutting operation.

We stock Diablo, Evolution and Q-Saw blades to fit a wide range of saws. Whether you need to cut Metal, Wood, Plastics or other specialty materials, we have the right blades for your cutting needs. From 4 in. to 15 in., thin kerf and normal kerf, High Speed and Low Speed blades, take a look at our wide selection of blades.