Laguna Woodworking Tools

Laguna 14|BX 12" RESAW 110V

• The 14|12 Bandsaw is a 110 Volt saw that feels like a 220.
• Features include a pyramid-shaped spine, 1 ¾ HP TEFC Motor, quick release tension, 115-volt outlet, and micro-polished 21 X 16″ table mounted onto oversized Trunion paired with Aluminum Hi/Low Fence. 
• Solid Cast Wheels are electronically, dynamically balanced & fitted with polyurethane one-piece tires designed to run cooler & last longer than conventional tires. 
• The worm gear & pinion is ultra-smooth and engineered to have minimum flex even when fully extended. 
• This is a trade mark of Laguna, just like the famous ceramic Laguna guides. 
• Double windows allow you to check both tension & tracking while the machine is running.

Main differences from 14|12:

• Weight increased
• Solid one-piece Frame
• Frame is heavier Gauge
• Magnetic On/Off Switch
• Disc-Brake w/ Micro-Switch
• Dual light mounting positions

LAGUNA 14|BX 12" RESAW 220V

• 1.75 HP, 14 Amp, TEFC
• 110 Volt Outlet for Light
• 6 ft. Cord w/ Nema Plug: 5-15P
• Weight (Net/Ship): 260/320 Lbs.
• 220Volt:
• 1 Phase, 2.5HP, 9.8Amp, TEFC
• 220 Volt Outlet for Light
• 6 ft. Cord w/Nema Plug: 6-15P
• Weight (Net/Ship): 270/330 Lbs
• SPECS:
• 12” Resaw
• Height: 70 ¼”
• 21 ½” X 16” Table
• Table Height: 38”
• 7° Table Tilt Left
• 2 X 4” Dust Ports
• Blade Length: 115”
• Cast Iron Wheels
• Magnetic Starter
• Dual Light Mount
• 45° Table Tilt Right
• Max. Blade Width: ¾”
• Pyramid-Shaped Spine
• Min. Blade Width: 1/8”
• Footprint: 17 ½” X 22 ½”
• Quick Release Tension
• Magnetic Blade Guard
• Laguna Ceramic Guides
• Hi/Low aluminum Fence
• Worm Gear Rack & Pinion
• Massive Cast Trunion 8”X13”

Main differences from 14|12:

• Weight increased
• Solid one-piece Frame
• Frame is heavier Gauge
• Magnetic On/Off Switch
• Disc-Brake w/ Micro-Switch
• Dual light mounting positions

LAGUNA 18|BX 16" RESAW

• Less Friction and Longer Life
• Easy Install with No Drilling Required
• Pedal Raises & Lowers Front Wheel
• Wheels Mounted Outside Frame to Maximize Stability
• PRO LIGHT SYSTEM
• Swivels 220°
• 12 Volt/50 Watt
• Tilts Vertically 320°
• Built-In Transformer
• Independent ON/OFF
• Ribbed Aluminum Case
• Halogen Hi-Intensity Light
• Bright, Glare-Free Flood Light
• Designed for Even Light Distribution
• Reinforced Glass, Dustproof Design
• Top and Side Cabinet Mounting Position

• The 18|BX Bandsaw follows the traditions of high-performance and reliability established by the widely-used Laguna Tools 14|12 and 14|bx models. 
• The 18|bx is built around a 3HP, 220V motor, and 145” (368 cm) blade for consistent results, cut-after-cut, regardless of wood material.

LAGUNA 18|CX 16" RESAW

• Adjustable Rubber Pads
• Oilite Bronze Bushing Allows for Less Friction and Longer Life
• Easy Install with No Drilling Required
• Pedal Raises & Lowers Front Wheel
• Wheels Mounted Outside Frame to Maximize Stability
• 18BX & 18CX PRO LIGHT
• Swivels 220°
• 12 Volt/50 Watt
• Tilts Vertically 320°
• Built-In Transformer
• Independent ON/OFF
• Ribbed Aluminum Case
• Halogen Hi-Intensity Light
• Bright, Glare-Free Flood Light
• Designed for Even Light Distribution
• Reinforced Glass, Dustproof Design
• Top and Side Cabinet Mounting Position
• The 18|CX Bandsaw follows in the traditions of high-performance and reliability to be expected from a Laguna Tools Bandsaw. 
• The 18|CX is built with a 1.75HP, 110V motor, and features variable speed control to cut through metals with ease.

PRO DRO FITS SINGLE HEAD SUPERBRUSHES & 13” COMBO, 25x2, 37x2 DRUM SANDERS

19-38 BRUSH/DRUM COMBO

New model includes: 

• Sanding Head Assembly with Flatter Installed, Conveyor Table Assembly, An Aluminum Drum w/ Two Bearing Sets, A Coupling and one 80 Girt Abrasive Belt, Open Stand Assembly.
• Our exclusive technology allows you to drum sand and profile sand on the same machine! Interchangeable drum and brush heads allow for unlimited applications! 
• The 19-38 Combination Sander comes standard as a bench-top unit (does not come with a stand or optional accessories shown) and is equipped with a 180 grit flatter-style head. 
• Additional brush heads and the sanding drum are available for purchase. 
• Flatter: Produces a hand-sanded finish on profiles like moldings, raised panel doors, and plywood. 
• Nylon: Scuff sand and defuzz stock. 
• Wire: Pull the soft grain out from soft woods or clean reclaimed lumber. 
• Drum: Dimension or finish sand flat stock. 
• Simple alignment feature Just one nut will adjust the conveyor to parallel the sanding head, making aligning the conveyor to the sanding head fast and easy. 
• Indexed alignment setting Has an indexed alignment setting for narrow and wide stock. 
• When sanding stock wider than 19”, the index lever will properly adjust the conveyor for flawless wide sanding. 
• Easy height adjustments A thrust bearing below the handle and a nut positioned above prevents the drum from moving out of the set position while sanding. 
• No backlash or slop in the height adjustment mechanism allowing easier and smoother height adjustments. 
• Extra-wide conveyor to properly support stock over 19” wide. The conveyor table is 22” wide to add support to the workpiece. 
• Excellent dust extraction, as metal dust cover is formed to shape of the drum. 
• Tension rollers are adjustable in height and hold down pressure, eliminating snipe. 
• Heavy-duty cast iron construction for strength, rigidity, and reduced vibration.

Sanding Capacity: 

• Maximum Width (in): 38 (two passes). 
• Minimum Length (in): 5-1/2. 
• Maximum Thickness (in): 4 (varies with application). 
• Minimum Thickness (in): 1/32. 
• Dimensions (in): 24H x 40W x 24D. 
• Brush Speed: AC Inverter, infinitely variable, 200-1000 RPM. 
• Drum Speed: 1740 RPM.
• Dust Hood: 1- 4″ vacuum port, min. 600 CFM recommended. 
• Conveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPM. 
• Drive Motor (TEFC): 1-3/4 HP. 
• Power Requirements: 110 V 15 amp. Net weight (lbs): 264. 
• Shipping Weight (lbs): 371

REVO 15|24

• With the launch of the Revo 15|24 Laguna is filling the gap between the Revo 12|16 & the legendary Revo 18|36, providing space-constrained users with more power and capacity.

Features:

• Sliding headstock for ergonomic outboard bowl turning
• Infinite electronic variable speed from 50 - 4200 RPM with a 3 step pulley
• Extraordinary torque even at low speeds, powered by Laguna Pulse Width Modulation
• Adjustable-height legs allow a more ergonomic working position tailored to individuals needs
• Steel bed provides strength, stability and a surface that the banjo will glide across smoothly
• A brand new feature is the patent-pending Precise Point that allows you to dial in the tailstock quill to meet with the headstock center
• Optional Accessories:
• Wheel system allows the lathe to be easily moved around the shop (ALAREVO1524 Wheel System)
• 20” steel extension fits in two positions for increased spindle or turning capacity (ALAREVO1524 EXTENSION)
• Brand new LED light featuring Chameleon hot/cold to configure perfect work lighting for your shop (ALEDLATHE)

Specs:

• Electrical: 1.5HP, 110 Volt, 8 Amp, 60 Hz.
• Motor: Permanent Magnet DC, 2150 RPM
• PWM: Pulse Width Module Speed Control
• Recommended Breaker: 15 Amp
• CSA C/US: 256540
• Spring Loaded Spindle Lock
• Swing over Bed:15-1/2”
• Swing over Banjo: 11-3/32”
• Max. Outboard Swing with optional accessory: 25”
• Tool-Rest Post Size: 1”
• Tool-Rest Length: 12”
• Spindle Taper: MT#2
• RPM High:650-4200
• RPM Mid: 325-2100
• RPM Low: 50-650
• Tailstock Quill: 4 ½”, Self-Ejecting
• Floor to Spindle Center Low: 36.4”
• Floor to Spindle Center High: 51.4”
• Floor to Bed Min.: 28.6”
• Floor to Bed Max. : 43.6”
• Front Bearing: TPI Taiwan 6206LLU
• Rear Bearing: TPI Taiwan 6205LLU
• Spindle Index #: 24 w/ Lock
• Distance between Centers: 24”
• Headstock/Tailstock Through-Bore: 3/8”
• Headstock Travel: Full Length
• Tailstock Storage of Centers
• Accepts vacuum chuck: No
• Spindle Size: 1 ¼” X 8TPI RH
• Floor Space: W 60” D 22” H 56”
• Box Dimensions: L 52” W 22” H22”
• Weight Net/Ship: 288/302 Lbs.

JX|6 QuadTec: I Jointer

• All-new for 2021, the Laguna JX|6 QuadTec I is loaded with highly desirable features to make jointing safer and more enjoyable.

JX|6 QuadTec I Standard Features :

• Parallelogram Table Adjustments - Table depth adjustments travel along an arc to keep the same distance to the cutterhead through its travel
• Emergency “Knee-Stop” - The new knee stop uses a body-length bar at knee height to shut off the JX jointer. This important safety feature allows the machine operator to stop the machine quickly at any position along the front of the machine while keeping hands on the workpiece
• New Ergonomic Machine Body - The new JX Series machine body has been redesigned with a “toe-kick” to allow the user to position themself closer to the machine tables and to move safer and easier along the length of the machine
• In-feed Support Roller - Infeed tables are now fitted with pull out support roller to help support longer materials
• QuadTec I Cutterhead - The all-new QuadTec I cuttherhead comes as standard equipment on the new JX-6. The QuadTec I produces an amazing surface finish on all woods including difficult hardwoods. The QuadTec I uses 4-sided carbide insert knives that are quieter and much more durable compared to straight HSS knives. The 4-sided knives can be rotated for a new cutting edge without the need for a knife setting jig
• Built-In Wheels - No need to purchase a separate mobility kit
• Cast-Iron Tables and Fence

Specs:

• Motor: 110v 1.5HP 1phase 60hz/ 13 Amp.
• CSA: Yes
• Bed Size: 6 x 60"
• Infeed Table Pull-out Extension: 8"
• Rabbeting Capacity: 1/2"
• Fence Size: 29"x3-3/4" cast iron
• Fence Tilt: ±45/90°
• Built-in extend infeed plastic roller 8"
• Magnetic switch: Yes (B/W)
• Plug NEMA 5-15P
• Max. Depth of Cut: 1/8"
• Table height from floor: 31"
• Safety bar shut-off: Yes
• Bracket to mount Light: No
• 110v outlet for light: No
• Bracket to mount Feeder: No
• Dust Port Diameter: 4"
• Cutterhead Insert #: 12 x 4-sided Carbide, 4 Row
• Cutterhead RPM: 5500
• Cutterhead Diameter: 2-1/2"
• Bed Adjustment: Parallelogram
• Dimensions set up approx.: 63"x 22"
• Dimensions Shipping: 65"x 22"x 13" + 31"x 16"x 27"
• Net/Ship Weight # of boxes: Lbs. 161/174 + 88/94 2 Boxes

JX|6 & JX|8: 220V Conversion Kit

• The jointer conversion kit allows a user to change the voltage on the JX:6 & JX:8 Quadtec jointer from 110 volt to 220 volt. 
• It's a simple install that can be done quickly by the user.
• Fits Laguna JX|6 QuadTec: I & JX|8 QuadTec: I Jointer

F1 & F2 CONVERSION KIT 110V TO 220V

COOL BLOCK SET16 HD & LARGER

• Replaces ceramic guide channels with channels that utilize a phenolic rod. 
• The wearable rod fully encompasses smaller blades to offer exceptional support when scroll cutting.

COOL BLOCK SET 3000 SERIES

LAGUNA GUIDES FITS MOST EURO

• The Laguna Guide system achieves its superior stability utilizing 10 points of contact, 4 more than traditional guide systems. 
• The ceramic material dissipates heat from the blade for longer life. 
• The Laguna Guide is a revolutionary blade-guide system that is designed to give you many years of superior-high-quality band sawing.
• Most blade-guide systems are designed to support the blade on the sides as well as either above or below the side guides to support the back of the blade. This forces the blade to twist as pressure from the wood being cut is transferred to the back blade guide.
• The Laguna Guides have been made to fit any Euro Style Guide. We will be adding more brands to the selections but for now, these are the ones you can choose from to feel confident they will fit. 
• If you have a different machine please contact us to determine if the guides will work on your machine.

CERAMIC RECTANGULAR FITS HD

• Fits 18 HD & LT 24x17
• SPACE AGE ceramic guide block as both side and thrust support. This enables the ceramic piece to gently touch the side of the blade, on all three sides without heat build-up, therefore giving stability, which has never been achieved before.
• Sold individually here
• Bandsaw holds 8 straight ceramics and 2 round

CERAMIC RECTANGULAR FITS 14|12, 14SUV, 18 3000

• Ceramic trapezoidal side piece for LT14, LT16, 14|12,14|bx,18|bx

CERAMIC ROUND FITS 14|12, 3000, HD

MINI GUIDES

• Laguna Mini Guides attach easily to accommodate smaller blades.
• Recommended for sizes 1/16”- 3/8”.
• 1 short phenolic rod is provided when tilting the table.
• Replacement rods sold separately.

REPLACEMENT PHENOLIC INSERTS SET

• Contains 1 x 5mm Short Phenolic Rod

AUTO CLEAN KIT FITS C|FLUX:1

• This upgrade allows automatic cleaning on the 110V c:flux series cyclones. 
• It includes a motor, cover plate & sensor that turns on when pressure rises inside the canister.

AUTO CLEAN KIT FITS C|FLUX:2 & 3

• This upgrade allows automatic cleaning on the 220V c:flux series cyclones. 
• It includes motor, cover plate & sensor that turns on when pressure rises inside the canister.