Item added to cart
Sawblade.com Logo 800.754.6920
Free Ground Shipping on Orders over $150 (except where noted)

Aftermarket Jet Replacement Parts

Compatible Jet Band Saw Replacement Parts

Features

  • Our Jet Band Saw Guides have no screws. We have innovated the Jet Replacement Blade Guide system by robotically brazing on the carbide utilizing induction heating.
  • Our Compatible Jet Band Wheels are all Heat Treated Ductile Iron, CNC Machined to make them last longer and at lower cost.
  • Eliminate contacting a local Jet Dealer and spending valuable time on the phone when you can click and we ship!

Benefits

  • Most Compatible Jet Parts are up to 30% less than the manufacturer's OEM parts
  • Fast Delivery, we inventory a large selection of "wear parts"
  • Superior Jet Band Saw Parts solutions supported by sawblade.com
  • Backed by the Sawblade.com 100% Satisfaction Guarantee 
    Clear Filters
P Jet HBS916W-147
ASM WW 7609516
2 Pack, Wire Band Saw Blade Chip Brush
OD: 3, ID: 3/8"
OD: 76mm, Arbor: 9MM

Extend Band Saw Blade Life with New Band Saw Chip Brushes.

Black Iron Band Saw Blade Chip Brushes, 2 Pack

OD: 3, ID: 3/8", Thickness: 5/8"

OD: 76mm, Arbor: 9MM, Thickness: 16mm

Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

Chip Brush Troubleshooting

A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    ID ⅜"
    OD 3"
    Thickness ⅝"
    Product Image
    $6.32
    WW JET-7609516
    ASM WW 7609516
    2 Pack, Wire Chip Brush For Jet Saws
    OD: 3, ID: 3/8"
    OD: 76mm, Arbor: 9MM

    Extend Band Saw Blade Life with New Band Saw Chip Brushes.

    Black Iron Band Saw Blade Chip Brushes, 2 Pack

    OD: 3, ID: 3/8", Thickness: 5/8"

    OD: 76mm, Arbor: 9MM, Thickness: 16mm

    Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

    When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

    Chip Brush Troubleshooting

    A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    ID ⅜"
    OD 3"
    Thickness ⅝"
    Product Image
    $26.33
    P JET HVBS7MW-013
    ASM P Jet HVBS7MW-013
    Cylinder Assembly
    Aprox 11 1/2” and 17 1/4” to center of holes
    Aftermarket Band Saw Part

    Quality Aftermarket Replacement Part for Jet Band Saw

    • Complete Cylinder with down feed control.
    • Aprox 11 1/2” closed and 17 1/4” open to center of mounting holes.
    • 10mm rod mount hole and 10mm base mount hole
    • Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. 
    • We only sell direct and pass lower costs to our customers. 
    • All Parts are backed by the sawblade.com 100% satisfaction guarantee
    Product Details
    photo below
    Blade Width .75" Blade
    System Feed System
    Product Image
    $234.00 **
    P Jet J-3410 J-3410-148A
    ASM P Jet HVBS7MW-013
    Cylinder Assembly
    Aprox 11 1/2” and 17 1/4” to center of holes
    Aftermarket Band Saw Part

    Quality Aftermarket Replacement Part for Jet Band Saw

    • Complete Cylinder with down feed control.
    • Aprox 11 1/2” closed and 17 1/4” open to center of mounting holes.
    • 10mm rod mount hole and 10mm base mount hole
    • Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. 
    • We only sell direct and pass lower costs to our customers. 
    • All Parts are backed by the sawblade.com 100% satisfaction guarantee
    Product Details
    photo below
    Blade Width .75" Blade
    System Feed System
    Product Image
    $234.00 **
    P JET HBS-814GH-190
    ASM P Jet HBS916W-131
    Blade Guide

    Aftermarket Jet Part

    Blade Guide

    Product Details
    photo below
    Blade Width 1.00" Blade
    System Blade Guides
    Product Image
    $28.60
    P JET HBS916W-131
    ASM P Jet HBS916W-131
    Blade Guide

    Aftermarket Jet Part

    Blade Guide

    Product Details
    photo below
    Blade Width 1.00" Blade
    System Blade Guides
    Product Image
    $28.60
    P Jet JWBS-10OS-TP-10
    ASM TP-10
    10" x 3/4" Rubber Band Wheel Tire
    Secure Fit Rubber Band Wheel Tire
    Fits Machines with 8"-10" Wheel Diameter

    A rubber band saw tire requires glue to keep it in place. The tire you purchase needs to be as close as possible to the size of the band wheel that you are covering. Do not buy a tire that is larger than your band wheel; a bit smaller is better. The tires will stretch a bit, but the larger the difference between the band wheel and the tire, the more difficult the installation.

    Product Details
    photo below
    Material Rubber
    Tire Diameter 10"
    Tire Width 3/4"
    Blade Width All Blade Width
    System Band Saw Tires
    Product Image
    $17.56
    P JET 9180-058-2
    ASM WW 500612
    2 Pack, Wire Band Saw Blade Chip Brush
    OD: 2", ID: 15/64"
    OD: 50mm, Arbor: 6MM

    Extend Band Saw Blade Life with New Band Saw Chip Brushes.

    Black Iron Band Saw Blade Chip Brushes, 2 Pack

    OD: 2", ID: 15/64", Thickness: 1/2"

    OD: 50mm, Arbor: 6MM, Thickness: 12mm

    Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

    When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

    Chip Brush Troubleshooting

    A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    ID 15/64"
    OD 2"
    Thickness ½"
    Product Image
    $27.33
    P JET HBS-814GH-198-2
    ASM WW 500612
    2 Pack, Wire Band Saw Blade Chip Brush
    OD: 2", ID: 15/64"
    OD: 50mm, Arbor: 6MM

    Extend Band Saw Blade Life with New Band Saw Chip Brushes.

    Black Iron Band Saw Blade Chip Brushes, 2 Pack

    OD: 2", ID: 15/64", Thickness: 1/2"

    OD: 50mm, Arbor: 6MM, Thickness: 12mm

    Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

    When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

    Chip Brush Troubleshooting

    A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    ID 15/64"
    OD 2"
    Thickness ½"
    Product Image
    $27.33
    P JET HBS916W-CP-1
    ASM MC8130-1
    Single Phase Coolant Pump
    No Returns on Electrical Parts
    1 Phase 115/230V 1/8 H.P. 110/220

    Quality Aftermarket Replacement Part for Jet Band Saw

    Application

    This coolant pump is a 1/8 H.P. 110/220 1 phase Coolant pump

    Circulation of Coolant

    Features

    Enclose immersion pump designed for long life under tough conditions.

    Benefits

    Proper circulation of coolant is essential to both saw and blade life, this pump will meet or exceed the needs that your saw requires to perform properly.

    Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
    All Parts are backed by the sawblade.com 100% satisfaction guarantee
    Product Details
    photo below
    Blade Width 1.00" Blade
    System Coolant System
    Product Image
    $296.00 **
    P JET HVBS7MW-063
    ASM MC8130-1
    Single Phase Jet Coolant Pump
    No Returns on Electrical Parts
    1 Phase 115/230V 1/8 H.P. 110/220

    Quality Aftermarket Replacement Part for Jet Band Saw

    Application

    This coolant pump is a 1/8 H.P. 110/220 1 phase Coolant pump

    Circulation of Coolant

    Features

    Enclose immersion pump designed for long life under tough conditions.

    Benefits

    Proper circulation of coolant is essential to both saw and blade life, this pump will meet or exceed the needs that your saw requires to perform properly.

    Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
    All Parts are backed by the sawblade.com 100% satisfaction guarantee
    Product Details
    photo below
    Blade Width All Blade Width
    System Coolant System
    Product Image
    $296.00 **
    P JET J-5042281
    ASM MC8130-1
    Single Phase Jet Coolant Pump
    110/220V
    1 Phase 115/230V 1/8 H.P. 110/220

    Quality Aftermarket Replacement Part for Jet Band Saw

    Application

    This coolant pump is a 1/8 H.P. 110/220 1 phase Coolant pump

    Circulation of Coolant

    Features

    Enclose immersion pump designed for long life under tough conditions.

    Benefits

    Proper circulation of coolant is essential to both saw and blade life, this pump will meet or exceed the needs that your saw requires to perform properly.

    Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.
    All Parts are backed by the sawblade.com 100% satisfaction guarantee
    Product Details
    photo below
    Product Image
    $296.00 **
    P JET J-7020 J-7040-147
    ASM WW 500612
    2 Pack, Wire Band Saw Blade Chip Brush
    OD: 2", ID: 15/64"
    OD: 50mm, Arbor: 6MM

    Extend Band Saw Blade Life with New Band Saw Chip Brushes.

    Black Iron Band Saw Blade Chip Brushes, 2 Pack

    OD: 2", ID: 15/64", Thickness: 1/2"

    OD: 50mm, Arbor: 6MM, Thickness: 12mm

    Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

    When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

    Chip Brush Troubleshooting

    A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    ID 15/64"
    OD 2"
    Thickness ½"
    Product Image
    $27.33
    P JET HVBS7MW-013-1
    ASM P JET HVBS7MW-013-1
    Cylinder Valve

    Aftermarket Jet Part

    Cylinder Valve

    Product Details
    photo below
    Blade Width .75" Blade
    System Feed System
    Product Image
    $93.20 **
    P Jet-TP-18
    Product Image for 18" x  1-1/2" Rubber Band Wheel Tire Secure Fit Rubber Band Wheel Tire
    18" x  1-1/2" Rubber Band Wheel Tire
    Secure Fit Rubber Band Wheel Tire
    Fits Machines with 17"-18" Wheel Diameter
    A rubber band saw tire requires glue to keep it in place. The tire you purchase needs to be as close as possible to the size of the band wheel that you are covering. Do not buy a tire that is larger than your band wheel; a bit smaller is better. The tires will stretch a bit, but the larger the difference between the band wheel and the tire, the more difficult the installation.
    Product Details
    photo below
    Material Rubber
    Tire Diameter 18"
    Tire Width 1-1/2"
    Blade Width All Blade Width
    System Band Saw Tires
    Product Image
    $27.96
    P Jet 9225-294-2
    ASM WW 380609SHFT
    Wire Band Saw Blade Chip Brush With Shaft
    OD: 1 ½" ID: 15/64" With Shaft
    OD: 38mm Shaft: 6MM With Shaft

    Extend Band Saw Blade Life with New Band Saw Chip Brushes.

    OD: 1 ½" ID: 15/64" Shaft Thickness: 5/16"

    OD: 38mm Shaft: 6MM Shaft Length :27mm

    Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

    When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

    Chip Brush Troubleshooting

    A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    Blade Width All Blade Width
    System Chip Brush
    ID 15/64" Shaft
    OD 1 ½"
    Thickness 5/16"
    Product Image
    $11.50
    P JET HVBS7MW-100
    ASM WW 380609SHFT
    Wire Band Saw Blade Chip Brush With Shaft
    OD: 1 ½" ID: 15/64" With Shaft
    OD: 38mm Shaft: 6MM With Shaft

    Extend Band Saw Blade Life with New Band Saw Chip Brushes.

    OD: 1 ½" ID: 15/64" Shaft Thickness: 5/16"

    OD: 38mm Shaft: 6MM Shaft Length :27mm

    Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

    When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

    Chip Brush Troubleshooting

    A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    ID 15/64" Shaft
    OD 1 ½"
    Thickness 5/16"
    Product Image
    $11.50
    P JET J-3410 J-3410-052
    ASM WW 380609SHFT
    Wire Band Saw Blade Chip Brush With Shaft
    OD: 1 ½" ID: 15/64" With Shaft
    OD: 38mm Shaft: 6MM With Shaft

    Extend Band Saw Blade Life with New Band Saw Chip Brushes.

    OD: 1 ½" ID: 15/64" Shaft Thickness: 5/16"

    OD: 38mm Shaft: 6MM Shaft Length :27mm

    Black Iron Band Saw Chip brushes are essential to the longevity and cost-effectiveness of band saw blades. The chip brush will remove chips out of the teeth on the blade. This action will greatly extend the life of your blade by getting rid of the chips before they can travel around the wheels of the band saw.

    When the chips get stuck in the wheels of the bearing, or back into the carbide guides it will harm the cutting ability of the blade. Since chip brushes are located where the blade exits the housing, they’re often overlooked and cause issues with band saw blade life

    Chip Brush Troubleshooting

    A worn or poorly adjusted chip brush can greatly reduce the life of a band saw blade and the quality of the cut. The main issues caused by faulty chip brushes include:

  • Chip stays in tooth gullet
  • Teeth breaking off
  • Teeth cracking
  • Blade cracking from teeth up
  • Loss of tooth set
  • Product Details
    photo below
    Blade Width All Blade Width
    System Chip Brush
    ID 15/64" Shaft
    OD 1 ½"
    Thickness 5/16"
    Product Image
    $11.50
    P Jet-TQ-20
    Product Image for 20" x 1-1/2" Urethane Band Wheel Tire Stretch On Urethane Band saw Tire
    20" x 1-1/2" Urethane Band Wheel Tire
    Stretch On Urethane Band saw Tire
    Fits Machines with 20" Wheel Diameter

    Urethane Tires last longer and work far better than rubber tires.They will not wear out and become brittle as quickly as rubber tires do. You will absolutely see the difference in the performance of your band saw when you upgrade to Urethane Tire.

    Product Details
    photo below
    Material Urethane
    Tire Diameter 20"
    Tire Width 1-1/2"
    Thickness .090"
    Blade Width All Blade Width
    System Band Saw Tires
    Product Image
    $35.96
    P JET J-3410 J-3410-152
    ASM P Jet 5710531A
    Blade Guide Assm. Left Side

    Aftermarket Jet Part

    Blade Guide Assm. Left Side

    Product Details
    photo below
    Blade Width .75 Blade
    Blade Width .75" Blade
    Guide Type Side Guide, Roller
    Machine Mfg Jet
    System Blade Guides
    Product Image
    $140.00

    Aftermarket replacement Jet Band Saw Parts Lower price, Better Quality. We innovate the manufacturing process on Jet Band Saw Replacement Parts by using robotic processes, This delivers a better part, faster.

    Sawblade.com is a vertically integrated company, producing our own blades, replacement parts and machines. We only sell direct and pass lower costs to our customers.