• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 5-3/8" X 20MM X 30T
• Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness
• Mild steel only - 1" max diameter 
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting
• Enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
• With up to 40X the life of standard abrasive disc
• Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
• Diablo's blade is designed to fit Panasonic and Similar Metal Cutting Saws
• 5-3/8-Inch diameter by 3T, 2mm arbor, 31+ RPM, 1/8-Inch max cut thickness, mild steel

Steel Demon Metal Cutting Saw Blade #D0648F

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 6-1/2" X 5/8" X 48T
• Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness
• Mild steel only - 1" max. diameter
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
• 6-1/2" diameter, 48T TCG, 5/8" arbor.

Steel Demon Metal Cutting Saw Blade #D0649F

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 6-3/4" X 20MM X 48T
• Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness, 1" max diameter 
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.

Steel Demon Metal Cutting Saw Blade #D0738FM

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 7" X 20MM X 38T
• Ideal For: Angle Iron*, Flat Bar*, Channel*, All-thread**, Pipe***
• Mild Steel only - 1/8"-3/8" max. wall thickness, 1"-1-1/2" max diameter 1/4" max. wall thickness
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
• With up to 40X the life of standard abrasive disc
• Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
• Diablo's blade is designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws. 
• 7-Inch/18mm diameter x 38t, 2mm arbor, 39+ RPM, 1/8" to 3/8" max cutting thickness, general purpose steel.

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 7-1/4" X 5/8" X 48T
• Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
• Mild Steel only - 1/4" max. wall thickness, 1" max diameter
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
• Diablo blades can be used on a standard circular saws.

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 7" X 20MM X 48T
• Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness, 1" max diameter
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
• Diablo blades are designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws.
• 7-Inch/18mm diameter x 48t, 2mm arbor, 39+ RPM, 1/8-Inch max cut thickness, general purpose steel.

Steel Demon Metal Cutting Saw Blade #D0756F

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 7-1/4" X 5/8" X 56T
• Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness, 1" max diameter
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
• Diablo's blade is designed to fit 7-1/4-Inch Circular Saws. 7-1/4 -Inch diameter x 56t, 5/8 -Inch arbor, 56+ RPM, 1/8-Inch thin steel max cut thickness, mild steel.

Non-Ferrous Metals / Plastics Saw Blade #D0756N

• Diablo Metal Cutting
• Non-Ferrous Metals / Plastics Saw Blade
• 7-1/4" X 5/8" X 56T
• Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring, Fiberglass
• Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish. 
• Diablo blades are ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate and other soft metals.

Steel Demon Metal Cutting Saw Blade #D0770F

• Diablo Metal Cutting
• 7-1/4" X 5/8" X 70T
• Ideal For: Roofing*, Siding*, Sheet*, Decking*, Corrugated Sheet*, Steel Studs Note: Use for mild steel only, 18 gauge or thinner
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts. 
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
• Diablo's blade is designed to fit 7-1/4-Inch Circular Saws. 
• 7-1/4-Inch diameter, 70T, 5/8-Inch arbor, 56+ RPM, 18 gauge or thinner steel max cut thickness, very thin steel.

10 in. x 50 Tooth Cermet Metal and Stainless Steel Cutting Saw Blade

Diablo’s new Steel Demon Cermet saw blade series is redefining metal cutting, and the jobsite, by introducing safer, exclusive innovation that allows users to cut both mild and stainless steels for 40X longer life versus standard carbide-tipped metal cutting saw blades. The specially formulated Cermet (Ceramic and Metallic) teeth provide high heat tolerances and increased hardness for superior wear and ultimate cutting life. Featuring a special Triple Chip Grind and Perma-Shield coating, these blades slice through the toughest of metals to produce precise cuts with less sparks and burr-free finishes that require no rework. The thin-kerf body and advanced laser cut anti-vibration stabilizer vents reduce vibration and noise to allow the blades to quickly shear through metal with ease and accuracy. The ability to cut through both mild and stainless steel eliminates the need for individually dedicated saw blades, offering a one-blade solution for ultimate metal cutting performance and unmatched value story, forever changing the metal cutting industry.

CERMET Steel Demon #D1260CF

• Diablo Metal Cutting
• 12" X 1" X 60T
• This Blade uses CERMET teeth instead of Carbide. 
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.

Non-Ferrous Metals/Plastics Saw Blade

• Diablo Metal Cutting
• 12" X 1" X 96T
• Ideal For: Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood *Note: Only cut laminate flooring on a 12" slide miter or table saw
• Diablo's blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out.
• Laminated materials are highly abrasive, so these blades feature a TiCo^™ carbide blend ideally suited to harsh service. 
• Diablo's blade is ideal for 12 inch sliding miter saws and portable table saws. 12-inch diameter, 96t TCG, 1-inch arbor, 5 degree hook.

355mm Ferrous Metals Sawblade

355MM x 1" BORE x 72T DTCG CARBIDE TIPPED FOR FERROUS METAL BLADE, 2.6 KERF

For cutting ferrous metals, mild steel, copper and etc. WARNING: This blade is not suitable for cutting non-ferrous metals (aluminum), wood, glass and conglomerate.

Thick Non-Ferrous Metal Blade #LU89M012

• Freud Metal Cutting
• 12" X 1" X 86T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. 
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. 
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

Thin Stock Non-Ferrous Metal Blade #LU90M010

• Freud Metal Cutting
• Thin Stock Non-Ferrous Metal Blade
• 10" X 5/8" X 100T TCG
• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
• This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.
• A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. 
• The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. 
• Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

Thin Stock Non-Ferrous Metal Blade #LU90M012

• Freud Metal Cutting
• 12" X 1" X 120T TCG
• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
• This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions. 
• A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding.
• The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. 
• Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.