Application Bandsaw Guide conversion kits replace the lower and upper factory band saw blade guide assemblies with a precision guide assembly. Bandsaw guide conversion (retrofit) kits typically include the upper and lower guides, upper and lower mounting brackets, studs, screws, and (if appropriate) a guard adapter bracket.Features This is a drastic improvement over factory blade guide, In the factory set up the blade is loosely held by solid blocks and the thrust is taken by the side of a ball bearing. The blade guide is solid high-grade aluminum and utilizes high-grade sealed ball bearings. With this design, the blade is held on each side by a ball bearing and the thrust is taken by a third ball bearing Benefits When you upgrade to our bandsaw guide conversion kits the blade is held much more precisely, which translates into cleaner cuts, quieter operation, and less wasted material Users report that Guide Kits improve overall saw performance , reduce blade friction, and increase cutting accuracy.
P C GAKIT GRI18-78
Grizzly 18"with 7/8" Post Grizzly 18" Guide Kit for 7/8" Post
Grizzly 18" Guide Kit for 7/8" Post
Grizzly 18" conversion kit updates your saws performance through the use of precision sealed ball bearing roller guides Improves your saw performance with reduced blade friction improves cutting accuracy and is adjustable for blade widths from 3/16" to 1 1/4" Measurement of the upper post is required before ordering This kit is for a straight 7/8" Post only Make sure to remove lower portion of the upper guide mounting bracket to check if post is turned at 7/8" at mount
Product Details
photo below
Blade Size
3/16" to 1-1/4"
Machine Mfg
Grizzly
Machine Size
18"
Machines Designed for
Grizzly 18" 7/8" Post
Stabilizer Kit
CTR1
Thrust Wheel
1 1/8"
P C GAKIT GROB 4V500
Grob 4V500Guide Conversion Kit Grob 4V500 Band Saw Guide Kit
Grob 4V500 Guide Conversion Kit
Grob 4V500 conversion kit updates your saws performance through the use of precision sealed ball bearing roller guides This provides your saw with reduced blade friction, improved cutting accuracy, and is adjustable for blade widths from 3/16" to 3/4" Fits 4v18-24
Product Details
photo below
Blade Size
3/16" to 3/4"
Machine Mfg
Grob
Machine Size
18" - 24"
Machines Designed for
Grob 4V
Stabilizer Kit
CTR5
Thrust Wheel
1 3/16"
P C GAKIT DAYTON16/18
Dayton 16/18"Guide Conversion Kit Dayton 16/18 Guide Kit
Dayton 16/18 Conversion Kit
This all bearing kit uses precision roller bearing guides to promote cooler running and longer blade life. The rugged guides are perfect for general work and resawing.
Product Details
photo below
Blade Size
3/16" to 3/4"
Machine Mfg
Dayton
Machine Size
16"/18"
Machines Designed for
Dayton 16"/18"
Stabilizer Kit
Thrust Wheel
1 3/16"
P C GAKIT DEL14-MA
Delta 14" Micro-AdjustGuide Conversion Kit with Micro-Adjustable guides
Delta 14" Micro-Adjust Conversion Kit
This provides your saw with reduced blade friction Improves cutting accuracy Adjustable for blade widths from 3/16" to 1" The Micro-Adjustable guides have tool free adjustment of both side support and thrust bearing assemblies
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Delta
Machine Size
14"
Machines Designed for
14" Delta with round upper post and Micro-Adjustable guides
Stabilizer Kit
CTR1
Thrust Wheel
7/8"
P C GAKIT GRI16B
Grizzly 16" Post-1993Guide Conversion Kit Grizzly 16" Post 93 Conversion Kit
Grizzly 16" Post 93 Conversion Kit
The Grizzly 16" conversion kit updates your saws performance through the use of precision sealed ball bearing roller guides This gives your saw with reduced blade friction Improves cutting accuracy, and is adjustable for blade widths from 3/16" to 1"
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Grizzly
Machine Size
16"
Machines Designed for
16" Grizzly Pre-1993
Stabilizer Kit
CTR2
Thrust Wheel
7/8"
P C GAKIT GRI17/19
Grizzly 17/19Guide Conversion Kit Grizzly 17"/19" Guide Conversion Kit
Grizzly 17"/19" Guide Conversion Kit
The Grizzly 17"/19" conversion kit updates your saws performance through the use of precision sealed ball bearing roller guides This provides your saw with reduced blade friction Improves cutting accuracy, and is adjustable for blade widths from 3/16" to 1 1/4" The rugged guides are perfect for general work and resawing
Product Details
photo below
Blade Size
3/16" to 3/4"
Machine Mfg
Grizzly
Machine Size
17"
Machines Designed for
17" and 19" Grizzly
Stabilizer Kit
CTR5
Thrust Wheel
7/8"
P C GAKIT JET14MAR
Jet 14" Micro-Adjust RiserGuide Conversion Kit Jet 14" Guide Kit with Micro-Adjustable Guides
Jet 14" Micro-Adjust Riser Guide Conversion Kit
The Jet 14" Guide Kit with Micro-Adjustable Guides for Riser block saws, updates your saws performance through the use of Tool-Less Micro-Adjustable guides This kit is intended for use with saws that have riser blocks installed Gives your saw with reduced blade friction Improves cutting accuracy and is adjustable for blade widths from 3/16" to 1" The Micro-Adjustable guides have tool free adjustment of both side support and thrust bearing assemblies
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Jet
Machine Size
14"
Machines Designed for
14" Jet with riser block installed
Stabilizer Kit
CTR1
Thrust Wheel
7/8"
P C GAKIT JET18X
JET18XGuide Conversion Kit
JET18X Guide Conversion Kit
The Jet 18" X conversion kit updates your saws performance through the use precision sealed ball bearing roller guides Fits model JWBS-18X and JWBS-18QT only This provides your saw with reduced blade friction Improves cutting accuracy and is adjustable for blade widths from 3/16" to 1 1/4"
Product Details
photo below
Blade Size
3/16" to 1-1/4"
Machine Mfg
Jet
Machine Size
18"
Machines Designed for
Jet (X & QT model only), JWBS-18X, JWBS-18QT
Stabilizer Kit
Thrust Wheel
1 1/8"
P C GAKIT PWR20
Powermatic 20"Guide Conversion Kit Powermatic 20 Guide Conversion Kit
Powermatic 20 Guide Conversion Kit
This all bearing kit uses precision made roller bearing guides to promote cooler running and longer blade life The rugged guides are perfect for general work and resawing
Product Details
photo below
Blade Size
3/16" to 3/4"
Machine Mfg
Powermatic
Machine Size
20"
Machines Designed for
20" Powermatic
Stabilizer Kit
CTR5
Thrust Wheel
1 3/16"
P C GAKIT WALK14
Walker Turner 14"Guide Conversion Kit Walker Turner 14 Guide Conversion Kit
Walker Turner 14" Guide Conversion Kit
This all bearing kit uses precision made roller bearing guides to promote cooler running and longer blade life The rugged guides are perfect for general work and resawing
Product Details
photo below
Blade Size
3/16" to 3/4"
Machine Mfg
Walker Turner
Machine Size
14"
Machines Designed for
14" Walker Turner
Stabilizer Kit
CTR5
Thrust Wheel
1 3/16"
P C GAKIT WALK16
Walker Turner 16"Guide Conversion Kit Walker Turner 16 Guide Conversion Kit
Walker Turner 16" Guide Conversion Kit
This all bearing kit uses precision made roller bearing guides to promote cooler running and longer blade life The rugged guides are perfect for general work and resawing
Product Details
photo below
Blade Size
3/16" to 3/4"
Blade Width
All Blade Width
Machine Mfg
Walker Turner
Machine Size
16"
System
Blade Guides
Machines Designed for
16" Walker Turner
Stabilizer Kit
CTR5
Thrust Wheel
1 3/16"
P C GAKIT DEL14MAR
Delta 14" Micro-Adjust RiserGuide Conversion Kit with Micro-Adjustable guides
Delta 14" Micro-Adjust Riser Guide Kit
The Carter Delta 14" Micro-Adjust upgrade kit for Riser block saws, updates your saws performance through the use of Tool-Less Micro-Adjustable guides. This kit is intended for use with saws that have riser blocks installed. Provides your saw with reduced blade friction, improved cutting accuracy Adjustable for blade widths from 3/16" to 1" The Micro-Adjustable guides have tool free adjustment of both side support and thrust bearing assemblies
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Delta
Machine Size
14"
Machines Designed for
14" Delta with riser block installed
Stabilizer Kit
CTR1
Thrust Wheel
7/8"
P C GAKIT DEL14R
Delta 14" Riser Guide Upgrade kitGuide Conversion Kit Delta 14 Riser Conv. Kit
Delta 14 Riser Guide Kit
Delta 14" Riser block conversion kit is for use with Delta 14" saws that have a riser block installed This kit updates your saws performance through the use of precision sealed ball bearing roller guides This provides your saw with reduced blade friction, improved cutting accuracy, and is adjustable for blade widths from 3/16" to 1"
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Delta
Machine Size
14"
Machines Designed for
14" Delta with round upper post
Stabilizer Kit
CTR1
Thrust Wheel
7/8"
P C GAKIT GRI18MIX
Grizzly 18"with step down post Grizzly 18" Guide Kit for Step Down Post
Grizzly 18" Guide Kit for Step Down Post
Grizzly 18" conversion kit updates your saws performance through the use of precision sealed ball bearing roller guides This provides your saw with reduced blade friction improved cutting accuracy and is adjustable for blade widths from 3/16" to 1 1/4" Measurement of the upper post is required before ordering This kit is for a Step Down post from 7/8" to 1" only Make sure to remove lower portion of the upper guide mounting bracket to check if post is turned at 7/8" at mount
Product Details
photo below
Blade Size
3/16" to 1-1/4"
Machine Mfg
Grizzly
Machine Size
18"
Machines Designed for
Grizzly 18" Step Down Post
Stabilizer Kit
CTR1
Thrust Wheel
1 1/8"
P C GAKIT JET18
Jet 18"Guide Conversion Kit Jet 18" Guide Conversion Kit
Jet 18" Guide Conversion Kit
Jet 18" conversion kit updates your saws performance through the use of precision sealed ball bearing roller guides Reduces blade friction and improves cutting accuracy Adjustable for blade widths from 3/16" to 1 1/4"
Product Details
photo below
Blade Size
3/16" to 1-1/4"
Machine Mfg
Jet
Machine Size
18"
Machines Designed for
18" Jet
Stabilizer Kit
CTR3
Thrust Wheel
1 1/8"
P C GAKIT PWR141
Powermatic 14"Guide Conversion Kit Powermatic 141 Guide Conversion Kit
Powermatic 141 Guide Conversion Kit
Powermatic 14" conversion kit updates your saws performance through the use of precision made all sealed ball bearing roller guides This provides your saw with reduced blade friction Improves cutting accuracy and is adjustable for blade widths from 3/16" to 1" Fit's model 141 woodworking saw and the model 143 metal working saw
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Powermatic
Machine Size
14"
Machines Designed for
14" Powermatic model 141/143
Stabilizer Kit
CTR2
Thrust Wheel
7/8"
P C GAKIT RLT14
Reliant 14"Guide Conversion Kit Reliant 14" Guide Conversion Kit
Reliant 14" Guide Conversion Kit
This all bearing kit uses precision made roller bearing guides to promote accuracy Gives your saw cooler running and longer blade life The rugged guides are perfect for general purpose work, detail cutting and resawing
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Reliant
Machine Size
14"
Machines Designed for
Reliant 14"
Stabilizer Kit
Thrust Wheel
7/8"
P C GAKIT SCM18
SCM S45 Mini-Max 18"Guide Conversion Kit SCM S45 Mini-Max 18" Band Saw
SCM S45 Mini-Max 18" Guide conversion Kit
The SCM S45 18" conversion kit updates your saws performance through the use of precision made all sealed ball bearing roller guides This provides your saw with reduced blade friction Improves cutting accuracy and is adjustable for blade widths from 3/16" to 1"
Product Details
photo below
Blade Size
1/8" - 1"
Machine Mfg
SCM
Machine Size
18"
Machines Designed for
SCM S45 Mini-Max 18" Band Saw
Stabilizer Kit
Thrust Wheel
7/8"
P C GAKIT BRIDGE20
Bridgewood 20"Band Saw Guide Kit, Upgrade Bridgewood 20 Guide Kit
Bridgewood 20" Band Saw Guide Upgrade Kit The Bridgewood 20" conversion kit updates your saws performance through the use of precision sealed ball bearing roller guides. This provides your saw with reduced blade friction, improved cutting accuracy, and is adjustable for blade widths from 3/16" to 1 1/4"
Product Details
photo below
Blade Size
3/16" to 1-1/4"
Machine Mfg
Bridgewood
Machine Size
20"
Machines Designed for
Bridgewood 20"
Stabilizer Kit
CTR5
Thrust Wheel
1 1/8"
P C GAKIT DEL14HMR
Delta 14" Hex Post Riser Block VersionGuide Conversion Kit with Micro-Adjustable guides
Delta 14" Hex Post Riser Block Guide Kit
The Delta 14" Hex Riser Block with Micro-Adjust upgrade kit updates your saws performance through the use of Tool-Less Micro-Adjustable guides For use with Delta 14" saws that have a hexagonal upper guide post and a riser block installed. This provides your saw with reduced blade friction Improved cutting accuracy, and is adjustable for blade widths from 3/16" to 1" The Micro-Adjustable guides have tool free adjustment of both side support and thrust bearing assemblies.
Product Details
photo below
Blade Size
3/16" to 1"
Machine Mfg
Delta
Machine Size
14"
Machines Designed for
14" Delta with Hex Post and Riser Block
Stabilizer Kit
CTR1
Thrust Wheel
7/8"
Need Help? Call Our Direct Parts Specialist: 800.742.0780.
Fill out the form. Email that is sent will link to the product and will come from your email address.