Free Ground Shipping on Orders over $150 (except where noted)
Freud and Diablo Products
Application
When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
Metal Cutting Carbide Machines & Blades replace abrasive cut off saws and last 20x Longer
QSaw, Freud, and Diablo have blades for specific wood cutting, laminate, and speciality materials
Features
Qsaw Industrial Circular Saw Blades are designed to deliver the highest performance in the industry.
We use the highest grade carbide, precision laser cut blade bodies & state of the art industrial brazing.
This makes for a premium blade designed for industrial use and to increase productivity.
Benefits
Qsaw Cuts Cooler, When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
Qsaw Cuts Faster, Qsaw blades simply cut faster than other carbide or abrasive blades
Qsaw Lasts Longer, other carbide and Abrasive blades wear down quickly. The Qsaw Carbide Circular Saw Blade can last up to 20x longer than other products on the market, if not more.
Qsaw Cuts Accurately, other blades can to flex and "walk" during a cut. Qsaw uses a laser cut blade body that is designed for accuracy and precision.
Mild Steel only - 1/4" max. wall thickness, 1" max diameter
Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
Diablo blades can be used on a standard circular saws.
Product Details
photo below
Blade Diameter
7.25 in
Blade Type
Metal Cutting Blades
Brand
Diablo
Material to Cut
Mild Steel
Arbor Diameter
0.625 in
Kerf
0.075 in
Max RPM
5800
Number of Teeth
48
Tooth Type
TCG
$45.02
CB M DIA D1296N
12" X 1" X 96T Diablo Metal Cutting Non-Ferrous Metals/Plastics Saw Blade
Non-Ferrous Metals/Plastics Saw Blade
Diablo Metal Cutting
12" X 1" X 96T
Ideal For: Ideal For: Brass, Aluminum, Copper, Plastics, Laminate Flooring*, Melamine, Wood *Note: Only cut laminate flooring on a 12" slide miter or table saw
Diablo's blade features a thin kerf triple chip design that is specially designed to cut laminate flooring, double-sided laminates and melamine cleanly, leaving a smooth finish with no chipping or tear-out.
Laminated materials are highly abrasive, so these blades feature a TiCo™ carbide blend ideally suited to harsh service.
Diablo's blade is ideal for 12 inch sliding miter saws and portable table saws. 12-inch diameter, 96t TCG, 1-inch arbor, 5 degree hook.
Product Details
photo below
Blade Diameter
12 in
Blade Type
Metal Cutting Blades
Brand
Diablo
Material to Cut
Aluminum/Non Ferrous
Arbor Diameter
1 in
Kerf
0.091 in
Max RPM
5000
Number of Teeth
96
Tooth Type
TCG
$98.91
CB M DIA D0736CFM
7" X 20MM X 36T Diablo Metal Cutting Steel Demon Metal Cutting Saw Blade
Mild Steel only - 1/8"-3/8" max. wall thickness, 1"-1-1/2" max diameter 1/4" max. wall thickness
Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
With up to 40X the life of standard abrasive disc
Steel demon delivers unparalleled performance and superior quality cuts.
Mild Steel only - 1/8" max. wall thickness, 1" max diameter
Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
Diablo's specialty Non-Ferrous/Plastics thin kerf blade has a Triple Chip Grind (TCG) Tooth Design for long life and a clean, burr-free finish.
Diablo blades are ideal for on-the-job cutting of nonferrous metal such as copper pipe, aluminum extrusions, brass plate and other soft metals.
Product Details
photo below
Blade Diameter
7.25 in
Blade Type
Metal Cutting Blades
Brand
Diablo
Material to Cut
Aluminum/Non Ferrous
Arbor Diameter
0.625 in
Kerf
0.106 in
Max RPM
8000
Number of Teeth
56
Tooth Type
TCG
$49.47
CB M FRE LU6A15
355MM x 1" BORE x 72T DTCG CARBIDE TIPPED FERROUS METAL BLADE, 2.6 KERF
355mm Ferrous Metals Sawblade
355MM x 1" BORE x 72T DTCG CARBIDE TIPPED FOR FERROUS METAL BLADE, 2.6 KERF
For cutting ferrous metals, mild steel, copper and etc. WARNING: This blade is not suitable for cutting non-ferrous metals (aluminum), wood, glass and conglomerate.
Flat-triple chip tooth.
The above-mentioned sawblades are not suitable to cut the following materials: Non-ferrous metals (aluminum, copper, brass, etc.) Wood, glass, concrete, etc.
Make sure that the work pieces to be cut are well fastened.
Silver I.C.E. Coating prevents build up on the blade surface and keeps the blade running cooler and cleaner
Ideal For: To cut drawn products and tubes with a thickness up to 4 mm, dry cut (without lubricants).
Product Details
photo below
Brand
Freud
Diameter
14"
Material To Cut
Mild Steel
Blade Diameter
14 in
Blade Type
Metal Cutting Blades
Brand
Freud
Material to Cut
Metal
Arbor Diameter
1 in
Kerf
0.102 in
Material Wall Thickness
1/4"-1/2"
Max RPM
1800
Number of Teeth
72
Tooth Type
TCG
$195.36
CB M FRE LU89M010
10" X 5/8" X 72T TCG Freud Metal Cutting Thick Non-Ferrous Metal Blade
This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.
These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life.
Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.
Product Details
photo below
Blade Diameter
10 in
Blade Type
Metal Cutting Blades
Brand
Freud
Material to Cut
Aluminum/Non Ferrous
Arbor Diameter
0.625 in
Kerf
0.122 in
Max RPM
7000
Number of Teeth
72
Tooth Type
TCG
$135.93
CB M DIA D0649F
6-3/4" X 20MM X 48T Diablo Metal Cutting Steel Demon Metal Cutting Saw Blade
Mild Steel only - 1/8" max. wall thickness, 1" max diameter
Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
This heavy-duty, non-ferrous metal cutting blade produces an excellent finish.
These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life.
Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.
Product Details
photo below
Blade Diameter
12 in
Blade Type
Metal Cutting Blades
Brand
Freud
Material to Cut
Aluminum/Non Ferrous
Arbor Diameter
1 in
Kerf
0.122 in
Max RPM
6000
Number of Teeth
86
Tooth Type
TCG
$168.89
CB M FRE LU90M010
10" X 5/8" X 100T TCG Freud Metal Cutting Thin Stock Non-Ferrous Metal Blade
Thin Stock Non-Ferrous Metal Blade #LU90M010
Freud Metal Cutting
Thin Stock Non-Ferrous Metal Blade
10" X 5/8" X 100T TCG
Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.
A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding.
The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade.
Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.
Product Details
photo below
Blade Diameter
10 in
Blade Type
Metal Cutting Blades
Brand
Freud
Material to Cut
Aluminum/Non Ferrous
Arbor Diameter
0.625 in
Kerf
0.11 in
Max RPM
8000
Number of Teeth
100
Tooth Type
TCG
$156.40
CB M DIA D0648F
6-1/2" X 5/8" X 48T Diablo Metal Cutting Steel Demon Metal Cutting Saw Blade
Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
Mild Steel only - 1/8" max. wall thickness, 1" max diameter
Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
Diablo's blade is designed to fit 7-1/4-Inch Circular Saws. 7-1/4 -Inch diameter x 56t, 5/8 -Inch arbor, 56+ RPM, 1/8-Inch thin steel max cut thickness, mild steel.
Product Details
photo below
Blade Diameter
7.25 in
Blade Type
Metal Cutting Blades
Brand
Diablo
Material to Cut
Thin Steel
Arbor Diameter
0.625 in
Kerf
0.102 in
Max RPM
5800
Number of Teeth
56
Tooth Type
TCG
$51.69
CB M DIA D0770F
7-1/4" X 5/8" X 70T Diablo Metal Cutting Steel Demon Metal Cutting Saw Blade
Steel Demon Metal Cutting Saw Blade #D0770F
Diablo Metal Cutting
7-1/4" X 5/8" X 70T
Ideal For: Roofing*, Siding*, Sheet*, Decking*, Corrugated Sheet*, Steel Studs Note: Use for mild steel only, 18 gauge or thinner
Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
Diablo's blade is designed to fit 7-1/4-Inch Circular Saws.
7-1/4-Inch diameter, 70T, 5/8-Inch arbor, 56+ RPM, 18 gauge or thinner steel max cut thickness, very thin steel.
Product Details
photo below
Blade Diameter
7.25 in
Blade Type
Metal Cutting Blades
Brand
Diablo
Material to Cut
Thin Steel
Arbor Diameter
0.625 in
Kerf
0.071 in
Max RPM
5800
Number of Teeth
70
Tooth Type
TCG
$55.07
CB M DIA D1050CF
10" x 1" ARBOR x 50T TCG METAL CUTTING SAW BLADE
10 in. x 50 Tooth Cermet Metal and Stainless Steel Cutting Saw Blade
Diablo’s new Steel Demon Cermet saw blade series is redefining metal cutting, and the jobsite, by introducing safer, exclusive innovation that allows users to cut both mild and stainless steels for 40X longer life versus standard carbide-tipped metal cutting saw blades. The specially formulated Cermet (Ceramic and Metallic) teeth provide high heat tolerances and increased hardness for superior wear and ultimate cutting life. Featuring a special Triple Chip Grind and Perma-Shield coating, these blades slice through the toughest of metals to produce precise cuts with less sparks and burr-free finishes that require no rework. The thin-kerf body and advanced laser cut anti-vibration stabilizer vents reduce vibration and noise to allow the blades to quickly shear through metal with ease and accuracy. The ability to cut through both mild and stainless steel eliminates the need for individually dedicated saw blades, offering a one-blade solution for ultimate metal cutting performance and unmatched value story, forever changing the metal cutting industry.
Cermet (Ceramic and Metallic) teeth provide a high heat tolerance and increased hardness for superior wear and ultimate cutting life; lasting up to 40X longer than standard carbide metal cutting saw blades
Triple Chip Tooth design provides less sparks, burr-free finishes that require no-rework, and longer cutting life
Advanced Laser Cut Stabilizer Vents trap noise and vibration for maximum stability, keeping the blade cool for straight, accurate cuts in metal cutting applications
Tri-Metal Shock Resistant Brazing, a three metal brazing system, allows Cermet teeth to withstand extreme impact for maximum durability
Laser Cut Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and long cutting life in metal cutting applications
Perma-SHIELD® non-stick coating resists heat build-up by protecting the blade against gumming and corrosion
Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation when in use on the saw
Cuts 1/8”-1/2” wall thickness in steel studs, angle iron, flat bar, channel, and EMT conduit
Cuts 1/4”-1” wall thickness in plate and bar stock
Cuts 1/2"-2” diameter threaded rod
Use with a dedicated low RPM metal cutting saw
Clamp down your materials
Use right tooth count to thickness of material
Use correct cutting speed and let the tool do the work (do not cut too slow)
Ideal For: Studs & Tubing (Wall thickness 1/8" (11 gauge) min 1/2" max); Plates & Bars (Thickness 1/4" (11 gauge) min 1" max); RODS (Diameter 1/2" min 2" max) - Studs/Channels, Angle Iron, Plates/Bars, Pipes/Tubes, EMT Conduit, Threaded Rod
Suggested Projects: Metalworking
Product Details
photo below
Blade Diameter
10 in
Blade Type
Metal Cutting Blades
Brand
Diablo
Material to Cut
Metal
Arbor Diameter
1 in
Kerf
0.083 in
Max RPM
3000
Number of Teeth
50
Tooth Type
TCG
$72.67
We stock Diablo and Freud blades to fit a wide range of saws. Whether you need to cut Metal, Wood, Plastics or other specialty materials, we have the right blades for your cutting needs. From 4 in. to 15 in., thin kerf and normal kerf, High Speed and Low Speed blades, take a look at our wide selection of blades.
Fill out the form. Email that is sent will link to the product and will come from your email address.