Item added to cart
Sawblade.com Logo 800.754.6920
Free Ground Shipping on Orders over $150 (except where noted)

Freud and Diablo Products

Application

  • When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
  • Metal Cutting Carbide Machines & Blades replace abrasive cut off saws and last 20x Longer
  • QSaw, Freud, and Diablo have blades for specific wood cutting, laminate, and speciality materials

Features

  • Qsaw Industrial Circular Saw Blades are designed to deliver the highest performance in the industry. 
  • We use the highest grade carbide, precision laser cut blade bodies & state of the art industrial brazing.
  • This makes for a premium blade designed for industrial use and to increase productivity.

Benefits

  • Qsaw Cuts Cooler,  When cutting steel, Qsaw blades will leave a workable finish, our carbide blades run cooler and with few sparks.
  • Qsaw Cuts Faster,  Qsaw blades simply cut faster than other carbide or abrasive blades
  • Qsaw Lasts Longer,  other carbide and Abrasive blades wear down quickly. The Qsaw Carbide Circular Saw Blade can last up to 20x longer than other products on the market, if not more.
  • Qsaw Cuts Accurately, other blades can to flex and "walk" during a cut. Qsaw uses a laser cut blade body that is designed for accuracy and precision.
        Clear Filters
-CB X FRE LCL7M10035
CAT CB FRE LCL7M10035
10" x 5/8" ARBOR x 60T ATB SOLID SURFACE BLADE, 2.4 KERF

10" x 5/8" ARBOR x 60T ATB SOLID SURFACE BLADE, 2.4 KERF

Product Details
photo below
Product Image
Only $66.40
-CB X FRE LU5E06
ASM CB FRE LU5E06
305MM x 1" BORE x 120T TCG CARBIDE TIPPED FOR NON FERROUS METAL BLADE, 3 KERF

Sawblade, Freud

305MM x 1" BORE x 120T TCG CARBIDE TIPPED FOR NON FERROUS METAL BLADE, 3 KERF

Product Details
photo below
Product Image
Only $164.53
-CB X FRE LU95R012
ASM CB S FRE LU95R012
12" x 1" BORE x 84T MTCG RED PERMASHIELD COATED CARBIDE TIPPED SOLID SURFACE BLADE
Freud Specialty Cutting
Solid Surface Blade

Solid Surface Blade #LU95R012

  • 12" X 5/8" X 84T TCG
  • Ideal For: Solid surface materials such as DuPont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®. Depth of cut (1/4" to 1-5/8").
  • With this ultimate solid surface blade, there is no need for stabilizers.
  • This blade features teeth with a specially designed triple chip grind for leaving swirl-free cuts in solid surface materials such as DuPont® Corian®, Wilsonart Gibralter® and SSV Fountainhead®.
  • The laser-cut anti-vibration slots reduce the sideways movement of the cutting edge against the solid surface material, dramatically extending cutting life.
  • With this ultimate solid surface blade, there is no need for stabilizers.
Product Details
photo below
Blade Diameter 12 in
Blade Type Specialty Blades
Brand Freud
Material to Cut Plastics
Arbor Diameter 1 in
Number of Teeth 84
Tooth Type MTCG
Product Image
Only $196.90
BIT FRE 87-108
ASM BIT FRE 87-108
8 PIECE CNC ROUTER BIT
SIGNMAKING SET

8 Piece CNC Router Bit Signmaking Set

8 piece Sign Making CNC Router Bit Set, 1/4" Shank. Ideal for Signmaking, Lettering and Engraving in a variety of materials. Set Includes: Up Cut Spiral Ball Nose- Solid Carbide (#72-101), Up Cut Spiral Ball Nose- Solid Carbide (#72-202), 6.2º x 1/32" Tapered Ball Tip -Solid Carbide (#72-300), 5.4ºx 1/16" Tapered Ball Tip -Solid Carbide (#72-400), Up Cut Spiral Solid Carbide (#75-102), Down Spiral Solid Carbide (#76-100), 3/4" 90º Degree V-Groove (#20-108), and 1/2" 60º Degree V-Groove (#20-152).

  • Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish
  • Enhanced TiCo™ Super Density Carbide with chromium designed and manufactured by Freud for 2x cutting life
  • Advanced cutting geometry for superior chip evacuation and finish quality
Ideal For: Ideal for wood, wood composites, plastics (hard & soft), aluminum for 2D & 3D carving, and sign making.
Product Details
photo below
Blade Diameter N/A
Blade Type Router Bits
Brand Freud
Material to Cut Multiple Purpose
Product Image
Only $313.00
BIT FRE 87-208
ASM BIT FRE 87-208
8 PIECE CNC ROUTER BIT
GENERAL PURPOSE SET

8 Piece CNC Router Bit General Purpose Set

8 piece General Purpose CNC Router Bit Set, 1/4 Inch Shank specifically designed for a wide variety of applications. Set Includes: Up Cut Spiral Ball Nose- Solid Carbide (#72-101), 7.5º x 3/16" Engraving V-Groove- Solid Carbide (#70-103), O-Flute Up Spiral Bit -Solid Carbide (#73-762), Up Cut Spiral Solid Carbide (#75-101), O- Flute Up Spiral Solid Carbide (#75-025), O- Flute Straight Solid Carbide (#71-040), 1/2" 90º Degree V-Groove (#20-104), and 1/2" 60º Degree V-Groove (#20-152).

  • Specifically designed for CNC Makers to deliver long cutting life, maximum durability and high quality finish
  • Enhanced TiCo™ Super Density Carbide with chromium designed and manufactured by Freud for 2x cutting life
  • Advanced cutting geometry for superior chip evacuation and finish quality
Ideal For: Ideal for wood, wood composites, plastics (hard & soft), aluminum for 2D & 3D carving, sign making, and engraving.
Product Details
photo below
Blade Diameter N/A
Blade Type Router Bits
Brand Freud
Material to Cut Multiple Purpose
Product Image
Only $240.00
BIT FRE 88-100
ASM BIT FRE 88-100
9 PIECE BASIC BIT SET, WITH 1/4" SHANK

CNC Bit Set

9 Piece Basic Bit Set

This is the ideal starter set for the beginning woodworker, and also makes a great investment for the experienced woodworker looking to refresh an existing bit collection. Offered in both 1/4" and 1/2" shank, the set includes a wide variety of bits: Straight, Mortising, Dovetail, Rabbeting, Rounding Over, Roman Ogee, Flush Trim and V-Grooving. Suitable for use with hand-held or table-mounted routers to cut hardwood, softwood, plywood or composites.

  • Nine great carbide-tipped bits that are perfect for woodworkers of any skill level
  • Set includes a unique shadow box case to keep bits handy and safe
  • Use with hand-held or table-mounted routers
  • Routs hardwood, softwood, plywood or composites
  • Freud Perma-SHIELD® Coating
  • Also contains a 2-cutter version of: 34-110 and 38-100
Ideal For: Starter set for the beginning woodworker
Product Details
photo below
Blade Diameter N/A
Blade Type Router Bits
Brand Freud
Material to Cut Multiple Purpose
Product Image
Only $235.93
CB DIA D0736GP
ASM CB DIA D0736GPA
7.25 Wood and Metal

7‑1/4 in. x 36 Tooth Wood & Metal Carbide Saw Blade

Diablo’s new 7-1/4” Wood & Metal saw blade is the industry’s first multi-purpose saw blade for cutting clean wood and wood with nails, up to 2-1/4” material thickness; and metal ranging from 3/32”-1/4” wall thickness and 1/4”-1” diameter. The versatility of these new blades provides the ability to use the same blade to cut wood and metal so now users can focus on completing the job more efficiently rather than wasting time with changing tools and saw blades. The Diablo made TiCo carbide tips, which are specially designed for this blade, coupled with the blade’s Chamfered-Alternate Tooth Design (C-ATB) tooth design provides impact resistance for cutting wood with nails as well as the durability for creating clean, burr free cuts in metal. Optimized for corded and cordless saws, this new blade cuts 2X lumber, wood with nails, angle iron, channel, flat bar, steel studs and threaded rod.

  • Specially formulated Diablo TiCo Carbide withstands impact, reduces wear and lasts longer in wood and metal cutting applications
  • Tri-Metal Shock Resistant Brazing allows carbide tips to withstand extreme impact for maximum durability in wood and metal applications
  • Perma-SHIELD non-stick aluminum coating protects the blade against heat, gumming and corrosion
  • Advanced Laser Cut Stabilizer Vents traps noise and vibration for maximum stability, keeping the blade cool with accurate cuts in wood and metal
  • Laser Cut Thin Kerf Design provides less resistance and heat build-up for ease of cut, accuracy and long cutting life in wood and metal
  • Laser Cut Arbor reduces vibration and premature wear for accurate blade rotation on corded and cordless saws
  • Cuts up to 2-1/4” material thickness in clean wood & wood with nail cutting applications
  • Cuts 3/32”-1/4” wall thickness in steel studs, channel, angle iron, pipe, tubing, plate and bar stock
  • Cuts 1/4" – 1” diameter threaded rod
Ideal For: Wood with nails as well as the durability for creating clean, burr free cuts in metal.
Product Details
photo below
Blade Diameter 7.25 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Multiple Purpose
Product Image
Only $31.24
CB DIA D1060S
ASM CB DIA D1060S
10" x 5/8" ARBOR x 60T ATB
FINE FINISHING MITER SAW BLADE

10 in. x 60 Tooth Fine Finish Slide Miter Saw Blade

Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in “S” are also ideal for radial arm saws).

  • TiCo™ Hi-Density carbide specifically designed for each application to increase performance
  • Perma-SHIELD® Non-stick Coating protects from heat, gumming, & corrosion
  • Super thin laser cut kerf for fast, durable, and clean cuts
  • Tri-metal shock resistant brazing allows carbide tips to withstand extreme impact for maximum durability
  • Hardened Steel Body – warrants a longer life and sharper cutting edge.
Ideal For: Trim carpenters, Diablo Fine Finish Blades leave a smooth sruface that requires little to no sanding
Suggested Projects: Trim, Remodeling/Demolition
Product Details
photo below
Product Image
Only $73.96
CB DIA DBD045040101F
CAT CB DIA DBD045040101F
4-1/2" Metal Cut Off Disc ‑ Thin Kerf
1/2" x 7/8" ARBOR x 0.04" THICKNESS THIN KERF METAL CUT OFF DISC BLADE

4‑1/2" Metal Cut Off Disc ‑ Thin Kerf

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

  • Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
  • For use on metal applications: steel, stainless, cast iron, sheet metal
  • Type 1 - Flat
Ideal For: Heavy Duty
Suggested Projects: Cutting Angle Iron, Metal Slotting, Cutting Steel Studs, Fabricating Sheet Metal
Product Details
photo below
Product Image
Only $2.13
CB DIA DBD045040115F
ASM CB DIA DBD045040115F
4-1/2" x 7/8" ARBOR x 0.04" THICKNESS
Metal Cut Off Disc Blade
(15 PACK)

4‑1/2" Metal Cut Off Disc ‑ Thin Kerf (15 Pack)

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

  • Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
  • For use on metal applications: steel, stainless, cast iron, sheet metal
  • Type 1 - Flat
Ideal For: Heavy Duty
Suggested Projects: Cutting Angle Iron, Metal Slotting, Cutting Steel Studs, Fabricating Sheet Metal
Product Details
photo below
Product Image
Only $27.24
CB DIA DBD045040125F
ASM CB DIA DBD045040125F
4-1/2" x 7/8" ARBOR x 0.04" THICKNESS
METAL CUT OFF DISC BLADE
(25 PACK)

4‑1/2" Metal Cut Off Disc ‑ Thin Kerf (25 Pack)

Diablo's premium metal cut-off discs provide superior performance and increased productivity. Featuring a premium aluminum oxide blend, these discs cut through material faster than other cut-off discs and offer an extra long cutting life. Fully reinforced for use in hand-held cut-off work. Ideal for use when working in hard to reach areas.

  • Premium Aluminum Oxide Blend - a superior quality formulation designed for fast material removal and long cutting life
  • For use on metal applications: steel, stainless, cast iron, sheet metal
  • Type 1 - Flat
Ideal For: Heavy Duty
Suggested Projects: Cutting Angle Iron, Metal Slotting, Cutting Steel Studs, Fabricating Sheet Metal
Product Details
photo below
Blade Diameter 4.50 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Metal
Product Image
Only $47.78
CB DIA DDD045DIA101F
ASM CB DIA DDD045DIA101F
4‑1/2" x 7/8" ARBOR
DIAMOND DISC
METAL CUT OFF BLADE

4‑1/2" Diamond Metal Cut‑Off Blade

Diamond metal cut-off wheels deliver extreme durability, minimal downtime and increased productivity. These diamond rimmed wheels deliver 100X longer cutting life versus a standard bonded cut-off disc in some of the most intense metal cutting situations. The wheel's long lasting durability maximizes cutting even in extreme applications such as rebar, angle iron, cast iron and steel bar. Diablo's diamond metal cut-off wheels not only provide long lasting cutting life, durability and control, but they also allow for a safer cutting experience.

  • Diamond rimmed wheels deliver up to 100X longer cutting life and durability when compared to one standard bonded cut-off disc
  • Advanced Electro-Plating Process for even distribution of diamond abrasive cutting edge
  • Maintains cutting diameter for consistent cutting results
  • Diamond technology is safer to use versus bonded discs by providing more control, less sparks and less dust
  • Diamond wheels do not shatter or break when dropped
Ideal For: Grinding & Polishing Metal
Product Details
photo below
Blade Diameter 4.50 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Metal
Product Image
Only $16.67
CB DIA DDD045TUR101C
ASM CB DIA DDD045TUR101C
Masonry Cut Off Wheel
4‑1/2" x 7/8" ARBOR
Masonry Cut Off Blade

4‑1/2" Masonry Cut‑Off Blade

  • CB DIA DDD045TUR101C
  • Masonry Cut Off Wheel
  • 4‑1/2" x 7/8" ARBOR
Product Details
photo below
Blade Diameter 4.50 in
Blade Type Specialty Blades
Brand Diablo
Material to Cut Multiple Purpose
Product Image
Only $10.00
CB M DIA D053830FMX
ASM CB M DIA D053830FMX
5-3/8" X 20MM X 30T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade  #D0530FM

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 5-3/8" X 20MM X 30T
  • Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
  • Mild Steel only - 1/8" max. wall thickness
  • Mild steel only - 1" max diameter 
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting
  • Enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
  • With up to 40X the life of standard abrasive disc
  • Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • Diablo's blade is designed to fit Panasonic and Similar Metal Cutting Saws
  • 5-3/8-Inch diameter by 3T, 2mm arbor, 31+ RPM, 1/8-Inch max cut thickness, mild steel
Product Details
photo below
Blade Diameter 5.375 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 20 mm
Kerf 0.059 in
Max RPM 6000
Number of Teeth 30
Tooth Type TCG
Product Image
Only $36.67
CB M DIA D0648F
ASM CB M DIA D0648F
6-1/2" X 5/8" X 48T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0648F

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 6-1/2" X 5/8" X 48T
  • Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
  • Mild Steel only - 1/8" max. wall thickness
  • Mild steel only - 1" max. diameter
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • 6-1/2" diameter, 48T TCG, 5/8" arbor.
Product Details
photo below
Blade Diameter 6.5 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 0.625 in
Brand Diablo
Diameter 6-1/2"
Kerf 0.071 in
Material To Cut Mild Steel
Max RPM 5800
Number of Teeth 48
Tooth Type TCG
Product Image
Only $45.73
CB M DIA D0649F
ASM CB M DIA D0649F
6-3/4" X 20MM X 48T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0649F

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 6-3/4" X 20MM X 48T
  • Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
  • Mild Steel only - 1/8" max. wall thickness, 1" max diameter 
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
Product Details
photo below
Blade Diameter 6.75 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 20 mm
Kerf 0.071 in
Max RPM 11000
Number of Teeth 48
Tooth Type TCG
Product Image
Only $43.47
CB M DIA D0736CF
ASM CB M DIA D0736CF
7-1/4" X 5/8" X 36T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0736CF

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 7-1/4" X 5/8" X 36T
  • Ideal For: Angle Iron*, Flat Bar*, Channel*, All-thread**, Pipe
  • Mild Steel only
  • 1/8"- 3/8" max. wall thickness, 1"-1-1/2" max diameter 1/4" max. wall thickness
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts. 
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • Diablo's blade is designed to fit 7-1/4-Inch Circular Saws. 7-1/4-Inch diameter x 36t, 5/8-Inch arbor, 56+ RPM, 1/8 to 3/8-Inch max cut thickness, mild steel.
Product Details
photo below
Blade Diameter 7.25 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 0.625 in
Kerf 0.102 in
Max RPM 5800
Number of Teeth 36
Tooth Type TCG
Product Image
Only $43.47
CB M DIA D0736CFM
ASM CB M DIA D0736CFM
7" X 20MM X 36T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0738CFM

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 7" X 20MM X 38T
  • Ideal For: Angle Iron*, Flat Bar*, Channel*, All-thread**, Pipe***
  • Mild Steel only - 1/8"-3/8" max. wall thickness, 1"-1-1/2" max diameter 1/4" max. wall thickness
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
  • With up to 40X the life of standard abrasive disc
  • Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades. 
  • Diablo's blade is designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws. 
  • 7-Inch/18mm diameter x 38t, 2mm arbor, 39+ RPM, 1/8" to 3/8" max cutting thickness, general purpose steel.
Product Details
photo below
Blade Diameter 7 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 20 mm
Kerf 0.102 in
Max RPM 5800
Number of Teeth 38
Tooth Type TCG
Product Image
Only $43.47
CB M DIA D0748CFA
ASM CB M DIA D0748CFA
7-1/4" X 5/8" X 48T
Diablo Metal Cutting
Steel Demon Metal Cutting Saw Blade

Steel Demon Metal Cutting Saw Blade #D0748F

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 7-1/4" X 5/8" X 48T
  • Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
  • Mild Steel only - 1/4" max. wall thickness, 1" max diameter
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades. 
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
  • Diablo blades can be used on a standard circular saws.
Product Details
photo below
Blade Diameter 7.25 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 0.625 in
Kerf 0.075 in
Max RPM 5800
Number of Teeth 48
Tooth Type TCG
Product Image
Only $45.20
CB M DIA D0748CFM
ASM CB M DIA D0748CFM
7" X 20MM X 48T
Diablo Metal Cutting
SteelDemon Metal Cutting Saw Blade

SteelDemon Metal Cutting Saw Blade #D0748CFM

  • Diablo Metal Cutting
  • Steel Demon Metal Cutting Saw Blade
  • 7" X 20MM X 48T
  • Ideal For: Steel Studs, Angle Iron, Flat Bar, Channel, EMT Conduit, All-thread
  • Mild Steel only - 1/8" max. wall thickness, 1" max diameter
  • Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades.
  • With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
  • Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.
  • Diablo blades are designed to fit Evolution, Trajan, Jancy, Morse, and Similar Metal Cutting Saws.
  • 7-Inch/18mm diameter x 48t, 2mm arbor, 39+ RPM, 1/8-Inch max cut thickness, general purpose steel.
Product Details
photo below
Blade Diameter 7 in
Blade Type Metal Cutting Blades
Brand Diablo
Material to Cut Mild Steel
Arbor Diameter 20 mm
Kerf 0.102 in
Max RPM 5800
Number of Teeth 48
Tooth Type TCG
Product Image
Only $46.13

We stock Diablo and Freud blades to fit a wide range of saws. Whether you need to cut Metal, Wood, Plastics or other specialty materials, we have the right blades for your cutting needs. From 4 in. to 15 in., thin kerf and normal kerf, High Speed and Low Speed blades, take a look at our wide selection of blades.