Ultra Finish Saw Blade #D0760A

• Ultra Finish Saw Blade
• 7-1/4" X 5/8" X 60T
• Ideal For: Ultra Finish crosscuts and rip cuts in wood, plywood & melamine
• Diablo's Ultra Finish Blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. 
• Diablo's blade produces a remarkably clean, chip-free cut that requires little to no sanding. 
• Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding. 7-1/4-Inch by 6t , ATB, 5/8-Inch diamond twist out arbor.

Fine Finish Saw Blade #D0860S

• Fine Finish Saw Blade
• 8-1/2" X 5/8" X 60T
• Ideal For: High quality crosscuts and rip cuts in wood, plywood & melamine
• Diablo's Fine Finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding.
• Ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in "S" are also ideal for radial arm saws). 
• 8-1/2" diameter x 6 tooth ATB with 5/8" arbor.

Cabinetmaker’s Crosscut Blade #LU73R010

• Heavy-Duty Crosscutting Blades Designed For The Industrial Cabinetmaker. Depth of cut 1/2" min to 2-3/4" max
• New 38 degree Hi-ATB for excellent crosscuts in double-sided veneer plywood and double-sided melamine
• Premium crosscutting blend of TiCo Hi-Density Carbide for maximum performance
• Perma-shield Non-Stick coating for less heat; gumming and corrosion
• Precision tensioning with computer controlled equipment for the blade to stay flat and true
• Positive hook angles for fast cutting and easy feed
• 10" Blade Diameter, 5/8" Arbor, 60 Teeth, Hi-ATBGrind, .126" Kerf (K), 10° Hook Angle, .087" Plate (P) blade

Combination Blade #LU84M011

• 10" X 5/8" X 50T COMB
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate combination blade, there is no need for stabilizers.

Combination Blade #LU84R011

• 10" X 5/8" X 50T COMB
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• This ultimate combination blade combines one flat tooth for ripping, followed by four alternate top bevel teeth for crosscutting and a large gullet for effective chip clearance. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate combination blade, there is no need for stabilizers.

Ultimate Cut-Off Blade #LU85R012

• 12" X 1" X 96T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. 
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts. 
• New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Thin Kerf Rip Blade #LU87R010

• 10" X 5/8" X 24T ATB
• Ideal For: Heavy-Duty Ripping Blades For Underpowered Saws. 
• Depth of cut (3/4" to 2-3/4").
• This blade gives new life to underpowered table saws and radial arm saws because the thin kerf does not require much horsepower.
• The Perma-SHIELD^™ coating helps this blade pull 1/3 less on the saw, which translates into over 33% more cutting power. 
• The ideal working range is from 3/4" to 2-3/4" thick.

Thin Kerf Next Gen Premier Fusion General Purpose #P410T

• 10" X 5/8" X 40T Hi-ATB
• Ideal For: Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate, veneered plywood, hardwoods & melamine.
• Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the most technologically advanced general purpose blade on the market! 
• Freud has designed these unique blades with a new radical tooth design called “Fusion Trio” which combines a special grind for the top, sides, and face of each tooth.
• This one-of-a-kind tooth geometry includes a 30 degree Hi-ATB, a double grind design, and an Axial Shear Face Grind to produce the ultimate polished finish in ripping and crosscutting applications with minimal resistance as it glides through in the material. 
• Whether you’re ripping or crosscutting, the next generation Premier Fusion blade is the best for flawless cuts in laminates, melamine, veneered plywoods, hardwoods, softwoods, and thick stock lumber.

Trim Saw Blade #D0436X

• Trim Saw Blade
• 4-1/2" X 20MM X 36T
• Ideal For: Smooth finish crosscuts in hardwood, softwood, or plywood
• Diablo's 4-1/2" 36 tooth
• Cordless Trim saw blade includes a 20mm arbor with 3/8" bushing. 
• Diablo's finish blades are the perfect choice for excellent rips and crosscuts using a portable saw while the super thin kerf helps extend the battery life on the saw.

Trim Saw Blade #D0516X

• Trim Saw Blade
• 5-3/8" X 10MM X 16T
• Ideal For: General construction applications, including fast, efficient ripping and crosscutting
• Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. 
• Diablo's trim saw blade is proven to extend run time on all trim saws.

Framing Trim Saw Blade #D0524X

• Framing Trim Saw Blade
• 5-3/8" X 10MM X 24T
• Ideal For: General construction applications, including fast, efficient ripping and crosscutting
• Diablo Cordless Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. 
• Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut. 
• The thin kerf design requires less cutting power from the user and the saw for better control over the cut. 
• Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades.

Trim Saw Blade #D0536X

• Trim Saw Blade
• 5-3/8" X 10MM X 36T
• Ideal For: Smooth finish crosscuts in hardwood, softwood, or plywood
• Diablo's thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. 
• Diablo's trim saw blade is proven to extend run time on Dewalt and similar trim saws.

• Cutting Wood Framing
• TiCo Hi-Density Carbide specifically designed for each application to provide maximum performance and cutting life
• Super thin laser cut kerf gives extremely fast, durable, and clean cuts
• Laser-cut stabilizer vents trap noise and vibration keeping the blade cool and reducing blade warp
• Ideal for general construction applications, including fast, efficient ripping and crosscutting
• 6" Blade Diameter, 0.5" Arbor, 20 Teeth, ATB Grind, .091" Kerf (K), -3° Hook Angle, .071" Plate (P) blade

Diablo Wood Cutting #D0724A-10

• Framing Blades
• 10 Pack 7-1/4" X 5/8" X 24T
• Ideal For: General construction applications, including fast, efficient ripping and crosscutting
• Diablo's Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting.
• Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut.
• The thin kerf design requires less cutting power from the user and the saw for better control over the cut. 
• Diablo's unique design, extra-tough steel plate and proprietary carbide tips deliver longer life — and frames more houses — than other framing blades

Demo Demon Ultimate Framing/Demolition #D0724DA

• Demo Demon Ultimate Framing/Demolition
• 7-1/4" X 5/8" X 24T
• Ideal For: General construction applications, including fast, efficient ripping and crosscutting
• Diablo's ultimate framing/demolition saw blade is specially formulated to deliver superior cutting performance in the most extreme construction situations.
• Diablo's Demo Demon is outperforming other standard blades up to 6X in intense applications. 
• Demo Demon is able to withstand impact from embedded nails and other obstructions. 
• No matter what the job: demolishing a roof, removing exterior siding or sub floors, or framing new construction - make sure to choose Diablo's Demo Demon.

7‑1/4 in. x 60 Tooth Ultra Finish Saw Blade

Framing Saw Blade #D0824X

• Framing Saw Blade
• 8 to 8-1/4" X 5/8" X 24T
• Ideal For: General construction applications, including fast, efficient ripping and crosscutting
• Diablo's Framing blade is ideal for general construction applications, including fast, efficient ripping and crosscutting. 
• Diablo's blade cuts rough framing lumber, high quality finish lumber, plywood, OSB, and hardboard siding with the smoothest, fastest and most accurate cut.

Finishing Saw Blade #D0840X

• Finishing Saw Blade
• 8-1/4" X 5/8" X 40T
• Ideal For: Smooth finish crosscuts in hardwood, softwood, or plywood
• Diablo's Finishing blade is ideal for smooth finish crosscuts in hardwood, softwood or plywood.
• Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. 
• They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. 
• A great choice for jobsite finish cuts in 1X, decking, fencing, fascia and plywood.

Heavy-Duty Rip Blade #LM72M010

• 10" X 5/8" X 24T FLAT
• Ideal For: Smooth, Fast Heavy-Duty Ripping. Depth of cut (3/4" to 2-3/4").
• This blade gives smooth, fast rips in hardwoods and softwoods. 
• The combination of a rigid blade body and razor sharp flat top carbide teeth will provide a "glue line" precision cut. 
• These blades are precision balanced and can be used in gang-rip operations. 
• The ideal working range is from 3/4" to 2-3/4" thick. 
• This blade also features laser cut anti-vibration slots, practically eliminating the vibration that resonates in standard blades. 
• With this ultimate ripping blade, there is no need for stabilizers.