12 in. x 100 Tooth Ultimate Polished Finish Saw Blade

Diablo’s new Ultimate Polished Finish saw blades feature Axial Shear Face Grind (ASFG) that cleanly shears through materials for superior quality finishes on fine molding, hardwoods, softwoods, veneered plywood, melamine and more. Also featuring Double-Side Grind tooth geometry, an incredible 200 additional grinds, this blade produces precise, polished-like cuts equal to that of 220-grit sandpaper or higher. Diablo’s proprietary TiCo Hi-Density Carbide is designed specifically to deliver extreme durability and 5X longer life on materials requiring polished-like finishes. Unlike other blades on the market, Diablo’s Ultimate Polished Finish saw blades have a laser-cut, ultra-thin kerf blade design for fast, effortless cuts on corded or cordless saws making this the go-to blade when working at a permanent location or at a portable jobsite. Diablo’s new Ultimate Polished Finish saw blades are REDefining cutting by introducing radical technology to maximize performance and extend cutting life, saving the PRO both time and money when completing their projects.

Thin Kerf Combination Blade #LU83R010

• 10" X 5/8" X 50T COMBINATION
• Ideal For: Crosscuts (3/4" to 3-1/2") & Rips (3/8" to 1-1/2").
• Features laser cut anti-vibration slots; Provides less amp draw and reduces material waste. Includes Large Gullet Chip clearance and no need for stabilizers. 
• This Incredible Combination Blade brings together the best of both worlds with one flat tooth for ripping as well as four alternate top bevel teeth for crosscutting.

Ultimate Cut-Off Blade #LU85R008

• 8" X 5/8" X 64T ATB
• Ideal For: Ultimate crosscutting blades for glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. 
• Depth of cut (1/4" min to 1-5/8" max).
• This Ultimate Cut-Off blade's teeth actually polish the material as it cuts.
• New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. 
• With a finish this perfect you won’t need stabilizers!

Thin Kerf General Purpose #P1060X

• Make clean cuts in hardwood, softwood, plywood and medium-density fiberboard (MDF) with the Avanti PRO 10 in. x 60-Tooth Fine Finish Saw Blade. 
• This was designed specifically for professional contractors. 
• This blade has a thin kerf edge and friction-reducing rim coating to resist binding and drag. 
• The durable carbide reinforcement extends the life of the blade.
• Great for professional contractors
• Ideal for hardwood, softwood, plywood and MDF
• Made of high-quality steel with carbide reinforcement for durability
• Thin kerf design for improved cutting performance
• Special rim coating for reduced binding and drag

10 in. x 60 Tooth Fine Finish Slide Miter Saw Blade

Fine Finish blades let trim crews get the most out of sliding or “chop” style miter saws, as well as jobsite or workshop table saws. The special cutting geometry and high tooth count produce extremely smooth cuts while minimizing “grabbing” or blowout. Diablo's particular blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding. It's ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in “S” are also ideal for radial arm saws).

Steel Demon Metal Cutting Saw Blade #D0649F

• Diablo Metal Cutting
• Steel Demon Metal Cutting Saw Blade
• 6-3/4" X 20MM X 48T
• Ideal For: Steel Studs, Angle Iron*, Flat Bar*, Channel*, EMT Conduit, All-thread
• Mild Steel only - 1/8" max. wall thickness, 1" max diameter 
• Steel Demon saw blades are specially designed for the extreme demands of ferrous metal cutting; thereby enabling precise cuts without sparks, heat or burred edges that result from using abrasive blades
• With up to 40X the life of standard abrasive disc, Steel demon delivers unparalleled performance and superior quality cuts.
• Blades feature Freud's TiCo Hi-Density Carbide, Laser cut bodies, Anti-vibration technology, Perma-Shield Non-Stick Coating, Triple Chip Design, and pretensioned blades.

Thick Non-Ferrous Metal Blade #LU89M012

• Freud Metal Cutting
• 12" X 1" X 86T TCG
• Ideal For: Cutting Thick Non-Ferrous Materials And Aluminum. Wall thickness 1/4" Max.
• This heavy-duty, non-ferrous metal cutting blade produces an excellent finish. 
• These blades have custom designed gullets to minimize chip build-up and specially formulated carbide for long life. 
• Freud recommends use of a liquid lubricant when cutting. This can be accomplished with a spray of WD-40 or other lubricant every 4 to 5 cuts. Wax sticks are not recommended.

Thin Stock Non-Ferrous Metal Blade #LU90M010

• Freud Metal Cutting
• Thin Stock Non-Ferrous Metal Blade
• 10" X 5/8" X 100T TCG
• Ideal For: Cutting Thin Aluminum And Other Non-Ferrous Metals. Wall thickness 1/8" Max.
• This blade produces a smooth, burr-free finish when cutting thin aluminum, brass and other non-ferrous metal extrusions.
• A high tooth count with a 5° hook angle allows the teeth to slice efficiently through the material without binding. 
• The requirements on the cutting edge greatly differ with nonferrous metals than with cutting wood. With this in mind, Freud formulated a special carbide with high impact strength for this blade. 
• Freud recommends use of a liquid lubricant when cutting non-ferrous materials. This can be accomplished with a spray of WD-40 or other similar type of lubricant every 4 or 5 cuts. Wax sticks are not recommended.

Composite Material/Plastics TrexBlade #D1284CD

• Diablo Specialty Cutting
• Composite Material/Plastics TrexBlade
• 12" X 1" X 84T
• Ideal for high quality finish cuts in composite material and cellular PVC
• Diablo's TrexBlade is the only recommended composite decking by Trex Company when cutting composite decking materials.
• These new blades deliver maximum performance and highest quality of finish; making it a "must-have" tool for both professionals and DIYers planning composite decking projects. 
• Diablo's new saw blade series has a modified triple chip tooth grind design, Perma-SHIELD^® non-stick coating, and specific TiCo^™ Hi-Density carbide to deliver more efficient and cleaner cuts with no swirl marks, less "gumming" of blade teeth and longer cutting life.

This industrial blade cuts acrylics, polycarbonates and other plastics, leaving a smooth finish without melting. By combining micrograin carbide tips with a specially modified triple chip grind these blades will give a clean smooth cut. These blades produce less heat keeping the cut edge crisp.

Professional Dado Set #SD208S

• 8" Stack Dado
• Ideal For: Ideal for under-powered saws
• Creates clean edges, square shoulders, make flat bottom grooves and virtually splinter-free cuts.
• Set includes 2 blades, 3 chippers, spacers, shim set and carrying case.

Fast Framing Trim Saw Blade #D053818WMX

• Fast Framing Trim Saw Blade
• 5-3/8" X 10MM X 18T
• Ideal For: Framing and paneling
• Diablo thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. 
• Diablo's trim saw blade is proven to extend run time on Dewalt and similar trim saws.

Finish Saw Blade for Port-Cable Saw Boss #D0640X

• Finish Saw Blade for Port-Cable Saw Boss
• 6" X 1/2" X 40T
• Ideal For: Smooth finish crosscuts in hardwood, softwood, or plywood
• Diablo's thin kerf trim saw blade is ideal for portable and low powered saws on the jobsite. 
• Diablo's trim saw blade is proven to extend run time on Porter Cable^®, Saw Boss, and similar trim saws.

Finish/Plywood Trim Saw Blade #D0641X

• Finish/Plywood Trim Saw Blade
• 6-1/2" X 5/8" X 40T
• Ideal For: Smooth finish crosscuts in hardwood, softwood, or plywood
• Diablo Finish blades are the perfect choice for excellent rips and crosscuts using a portable saw. 
• They deliver a smoother edge than framing blades, but still provide an excellent combination of cutting speed and long life. 
• A great choice for job-site finish cuts in 1X, decking, fencing, fascia and plywood.

Ultra Finish Saw Blade #D0760A

• Ultra Finish Saw Blade
• 7-1/4" X 5/8" X 60T
• Ideal For: Ultra Finish crosscuts and rip cuts in wood, plywood & melamine
• Diablo's Ultra Finish Blades offer the quality that fine cabinetmakers expect with the capability to handle the extreme conditions of professional construction. 
• Diablo's blade produces a remarkably clean, chip-free cut that requires little to no sanding. 
• Ideal for crosscutting oak, pine, melamine, veneer plywood and delicate molding. 7-1/4-Inch by 6t , ATB, 5/8-Inch diamond twist out arbor.

Fine Finish Saw Blade #D0860S

• Fine Finish Saw Blade
• 8-1/2" X 5/8" X 60T
• Ideal For: High quality crosscuts and rip cuts in wood, plywood & melamine
• Diablo's Fine Finish blade is the ideal choice for trim carpenters because it leaves a smooth surface that requires little to no sanding.
• Ideal for crosscutting oak, pine, melamine, plywood, and moulding. (Blades ending in "S" are also ideal for radial arm saws). 
• 8-1/2" diameter x 6 tooth ATB with 5/8" arbor.

Cabinetmaker’s Crosscut Blade #LU73R010

• Heavy-Duty Crosscutting Blades Designed For The Industrial Cabinetmaker. Depth of cut 1/2" min to 2-3/4" max
• New 38 degree Hi-ATB for excellent crosscuts in double-sided veneer plywood and double-sided melamine
• Premium crosscutting blend of TiCo Hi-Density Carbide for maximum performance
• Perma-shield Non-Stick coating for less heat; gumming and corrosion
• Precision tensioning with computer controlled equipment for the blade to stay flat and true
• Positive hook angles for fast cutting and easy feed
• 10" Blade Diameter, 5/8" Arbor, 60 Teeth, Hi-ATBGrind, .126" Kerf (K), 10° Hook Angle, .087" Plate (P) blade

Thin Kerf General Purpose Blade #LU86R010

• 10" X 5/8" X 40T ATB
• Ideal For: For Heavy-Duty General Purpose Applications. 
• Crosscuts (3/4" to 3-1/2") & Rips (1/4" to 1" ).
• This heavy-duty thin kerf blade is good for crosscutting thick hardwoods and softwoods and thinner stock materials.
• The ideal working range is from 3/4" to 3-1/2" thick for crosscutting, and 1/4" to 1" thick for ripping. 
• Thinner or thicker material may be cut, but some loss of surface finish may occur.

Thin Kerf Next Gen Premier Fusion General Purpose #P410T

• 10" X 5/8" X 40T Hi-ATB
• Ideal For: Crosscuts (3/8" to 3-1/2") & Rips (3/4" to 1-1/2") wood, laminate, veneered plywood, hardwoods & melamine.
• Freud’s Next Generation Premier Fusion featuring the radical new Fusion Trio Tooth Design is the most technologically advanced general purpose blade on the market! 
• Freud has designed these unique blades with a new radical tooth design called “Fusion Trio” which combines a special grind for the top, sides, and face of each tooth.
• This one-of-a-kind tooth geometry includes a 30 degree Hi-ATB, a double grind design, and an Axial Shear Face Grind to produce the ultimate polished finish in ripping and crosscutting applications with minimal resistance as it glides through in the material. 
• Whether you’re ripping or crosscutting, the next generation Premier Fusion blade is the best for flawless cuts in laminates, melamine, veneered plywoods, hardwoods, softwoods, and thick stock lumber.